Shure WCM16 Handleiding

Shure Microfoon WCM16

Lees hieronder de 📖 handleiding in het Nederlandse voor Shure WCM16 (6 pagina's) in de categorie Microfoon. Deze handleiding was nuttig voor 46 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/6

1/6

WCM16 -- Headset Condenser Microphone

General Description

The Shure Model WCM16 head-worn electret condenser microphone is intended for wireless use by performers,

lecturers, and others who require the highest quality voice pickup with maximum mobility. Its wide frequency re

sponse, low RF susceptibility and reliable operation at temperature and humidity extremes make the WCM16 suit

able for virtually any vocal application. When used with the Shure Body-Pack Transmitters, the performance of the

WCM16 closely resembles the finest conventional vocal microphones.

Miniaturized active circuitry included in the cartridge assembly provides equalization that tailors the low-frequency

response to resemble the warm proximity effect of larger vocal microphones. Because of this low-end response, it

is not necessary to position the microphone directly in front of the mouth, thus avoiding much popping and breath

noise, even without the supplied foam pop screen.

The microphone's hypercardioid unidirectional pickup pattern provides maximum isolation from ambient noise and

from adjacent sound sources such as musical instruments, loudspeakers and other performers. This permits high

er gain-before-feedback without loss or masking of vocals.

FEATURES:

•Extra lightweight, adjustable headband stays secure and virtually disappears while being worn

•Response comparable to the finest conventional vocal microphones

• Hypercardioid polar pattern provides maximum isolation from vocalist's own instrument and those of other per

formers

•Uniform polar pattern at all frequencies for maximum gain before feedback

•High input clipping level eliminates overload distortion

•Supplied acoustic foam pop screen

•Reliable at temperature and humidity extremes

Wearing the Microphone Headset

1. Place the microphone on the user's head so that the large diameter band is horizontal across the back of the

head. The band may be completely hidden under the hair. The ends of the headband should fit comfortably in

front of the ears. Extend or retract the adjustable headband (see Figure 1) to achieve this result.

2. For maximum gain before feedback, carefully extend or retract the boom (see Figure 1) so that the microphone

grille (silver side) is within 40 mm (1-1/2 in.) of the left corner of the mouth. It may be necessary to bend the

Shure Incorporated

2/6

headband tube just in front of the left ear for optimum microphone positioning. A slight bend downward and/ or

away is usually sufficient.

Note: The headband tubing will not withstand repeated bending, so make this adjustment only once, if neces

sary.

3. If breath noise or popping is audible, install the supplied pop screen so that the red dot on the pop screen cor

responds to the location of the microphone grille.

Figure 1: PARTS OF THE WCM16 HEAD-WORN MICROPHONE

Positioning the Microphone Pickup

The hypercardioid unidirectional pickup pattern of the WCM16 has maximum rejection of unwanted sound sources

at about a 110° angle each way from the front axis of the microphone (see Figure 1). Directly to the rear of the mi

crophone (at 180°) there is as little as 6dB rejection-not much less pickup than at the front of the microphone (at

0°).

Sound sources that may cause feedback (such as monitor or P.A. speakers) or sound that you do not want to pick

up with the WCM16 (such as percussion instruments or other performers) should NOT be placed directly to the

rear of the microphone. It is better to adjust positioning so that unwanted sound sources are located at the 110°

maximum rejection points. Note that when wearing the headset the rear of the microphone points out towards the

wearer's left.

Shure Incorporated

3/6

Connecting to a Transmitter

The WCM16 is configured for direct connection to a Shure Body-Pack Transmitter, such as models T1, T1G, T11,

SC1, EC1, or LX1, using the attached cable.

Microphone Powering

The WCM16 is designed to be powered from the +5 Vdc source at microphone connector pin 2 of a Shure trans

mitter.

Specifications

(Measured using test circuit in Figure 4)

Type

Condenser (electret bias)

Frequency Response

50 to 18,000 Hz

Polar Pattern

Hypercardioid, uniform with frequency

Output Level (close-talked at 1,000 Hz)

Open Circuit Voltage -55.0 (1.8 at 0.6 ) 1 Pascal=94 dB SPL dBV mV m

Maximum Sound Pressure Level

150 at 1%THD dB

Dynamic Range

121 dB

Output Noise

29 equivalent SPL, A-weighted dB

Product specificaties

Merk:	Shure
Categorie:	Microfoon
Model:	WCM16
Kleur van het product:	Zwart
Soort:	Microfoon voor podiumpresentaties
Compatibele producten:	Shure T1, T1G, T11, SC1, EC1, LX1
Signaal/ruis-verhouding:	94 dB
Operating voltage:	5 V
Frequentie microfoon:	50 - 18 Hz
Aantal producten inbegrepen:	1 stuk(s)
Gewicht microfoon:	36 g
Dynamisch bereik:	121 dB
Output impedance:	1200 Ohm
Microphone Total Harmonic Distortion (THD):	1 procent