Shure VP89 Handleiding

Shure Microfoon VP89

Lees hieronder de 📖 handleiding in het Nederlandse voor Shure VP89 (12 pagina's) in de categorie Microfoon. Deze handleiding was nuttig voor 54 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/12

VP89

Modular Shotgun Microphone

Модульный линейный микрофон

Microphone canon modulaire

Modulares Richtrohrmikrofon

Micrófono de cañón modular

Microfono shotgun modulare

モジュールショットガンマイクロホン

Modular Shotgun 마이크

模块化短枪式话筒

www.shure.com

Printed in U.S.A.

27A22326 (Rev. 2)

WIRED MICROPHONE

VP89L

VP89M

VP89S

6 “ (15 cm)

General Description

The VP89 is a professional shotgun microphone for use in critical A/V media

production applications. Designed with interchangeable long, medium and

short capsules, the VP89 models provide scalable, superior off-axis rejection

for focus and flexibility in a wide variety of on-site locations.

Variations

The VP89 is available with long, medium, and short capsules in three model

variations: , , and .VP89L VP89M VP89S

The VP89 microphone has a tighter acceptance angle (is more directional)

when used with longer capsules, as shown in the graphic below.

Features

• Premier production microphone crafted with Shure quality, ruggedness, and

reliability

• Highly directional, uniform polar pattern optimized for distant pickup

• Modular design allows optimal performance in a wide variety of production

settings

• Designed for extremely low susceptibility to radiated and conducted hum,

GSM, and radio frequency interference (RFI)

• Superior common mode rejection

• Low self-noise and high output level

• Class A, discrete preamplifier provides transparent, extremely fast

transient response with no crossover distortion and minimal harmonic and

intermodulation distortion

• Selectable low-frequency response

• Lightweight, compact design accommodates prolonged operation,

minimizing operator fatigue attributed to many shotgun microphones

• Aircraft-grade aluminum alloy construction resists wear and abuse

• Operates over a wide range of temperatures and humidity

Changing Capsules

1. Turn off phantom power supplied to the microphone.

2. Unscrew the capsule from the preamplifier. Store the unused capsule with

its protective cap (included with the purchase of additional capsules).

3. Thread the replacement capsule to the preamp. Do not overtighten.

Note: Before each use, ensure the capsule is tightly secured to the preamp to

prevent signal loss during operation.

Wind Protection

Use the supplied windscreen to reduce wind-noise. For increased protection,

Shure offers two premium Rycote® wind protection accessories:

• Attenuates up to 25 dB of wind-noiseSoftie Windshield:

• Attenuates up to 38 dB of wind-noise while Suspension Windshield Kit:

preserving critical high frequencies; included Lyre suspension mounts

provide up to 25 dB of isolation

Suspension Mounts

Shure offers four Rycote® Softie Lyre Mounts to reduce handling noise and

low-frequency vibrations up to 15 dB:

• Secures to a standard camera shoe; for VP89S and InVision Video:

VP89M

• Fits into a standard camera clamp; for Camera Clamp Adapter (CCA):

VP89S, VP89M

• Adjustable handheld mount; for VP89S, VP89MPistol Grip:

• Secures to a boom pole; for VP89LBoom Adapter:

Note: All Softie Lyre Mounts (except InVision Video) are equipped with 3/8”

and 5/8” female threaded adapters for additional mounting options.

A89U Double-Barrel Adapter

The A89U adapter routes the VP89 preamp and cable connection beneath the

capsule, shortening the length of the microphone by up to 6” (150 mm). Use

the adapter to make a highly directional microphone in a compact form-factor.

XLR Connector Gasket

This microphone is supplied with a small corrugated rubber ring in the XLR

connector to absorb the mechanical slack between the microphone and cable.

Many high-end cables are made with a rubber shoulder on the XLR-F for the

same purpose. When connecting this microphone to a cable with a rubber

shoulder XLR-F connector, remove the corrugated rubber ring from the micro-

phone to ensure a proper fit.

Load Impedance

Maximum SPL capability, output clipping level, and dynamic range vary with

the input load impedance of the preamplifier to which the microphone is con-

nected. Shure recommends a minimum input load impedance of 1000 Ohms.

Most modern microphone preamplifiers meet this requirement. Higher imped-

ance results in better performance for these specifications.

Selecting Low-Frequency Response

A two-position switch on the preamplifier adjusts the low-frequency response.

Use the low-frequency filter to reduce room noise or proximity effect.

Normal response: Provides the most natural sound in most applications.

Low-frequency rolloff: Provides a 12 dB-per-octave rolloff below the

specified frequency for each model (see product specifications). Reduces

floor rumble and low-frequency room noise from heating and air conditioning

systems.

Compatibility

The VP89 is designed for forward and backward compatibility with Shure

SM89 shotgun microphones. Capsules and preamplifiers can interchange

seamlessly between the two models.

Power Requirements

This microphone requires phantom power and performs best with a 48 V DC

supply (IEC-61938), but it can operate with supplies as low as 11 V DC. Most

modern mixers provide phantom power and require the use of a mi-balanced

crophone cable: XLR-to-XLR or XLR-to-TRS.

Note: Information in this guide is subject to change without notice. For addi-

tional information about this product, please visit www.shure.com.

Rycote Custom Accessories

Shure offers custom Rycote

® suspension mounting and wind-protection solu-

tions designed for Shure VP shotgun microphones.

XLR-F

rubber shoulder corrugated rubber ring

MICROPHONE

Specifications

Cartridge Type Electret Condenser

Polar Pattern Hypercardioid/Lobar

Frequency Response VP89L: VP89M: VP89S:

40 to 20,000 Hz 50 to 20,000 Hz 65 to 20,000 Hz

Output Impedance 115.0 Ω

Sensitivity

open circuit voltage, @ 1 kHz,

typical

-33.5 dBV/Pa[1] (21.1 mV)

Maximum SPL

1 kHz at 1% THD[2]

2500 Ω load: 132.0 dB SPL

1000 Ω load: 128.5 dB SPL

Signal-to-Noise Ratio[3] 79.0 dB

Dynamic Range

@ 1 kHz

2500 Ω load: 117.0 dB

1000 Ω load: 113.5 dB

Clipping Level

@ 1 kHz, 1% THD

2500 Ω load: 4.0dBV

1000 Ω load: 0.0dBV

Self Noise

equivalent SPL, A-weighted,

typical

15.0 dB

Common Mode Rejection

20 to 20,000 Hz ≥70.0 dB

Low-Frequency Filter Switch

-12 dB/oct below specified

frequency

Flat Response: 100 Hz

Low Frequency Rolloff: 200 Hz

Operating Temperature

Range -18°C (0°F) to 57°C (135°F)

Storage Temperature Range -29°C (-20°F) to 74°C (165°F)

Operating Relative Humidity 0 to 95%

Polarity Positive pressure on diaphragm produces positive voltage on pin

2 with respect to pin 3

Housing Charcoal-grey metallic painted aluminum alloy handle and grille

with stainless steel screen

Power Requirements 11–52 V DC

[4]

phantom power (IEC-61938), <2.0 mA

Net Weight VP89L: VP89M: VP89S:

174 g (6.1 oz.) 138 g (4.9 oz.) 117 g (4.1 oz.)

[1] 1 Pa=94 dB SPL

[2]THD of microphone preamplifier when applied input signal level is equivalent to cartridge output

at specified SPL

[3]S/N ratio is the difference between 94 dB SPL and equivalent SPL of self noise, A-weighted

[4]All specifications measured with a 48 Vdc phantom power supply. The microphone operates at

lower voltages, but with slightly decreased headroom and sensitivity.

Homologations

Autorisé à porter la marque CE. Conforme à la directive européenne CEM

2004/108/CE. Conforme aux normes harmonisées EN55103-1:1996 et

EN55103-2:1996 pour les environnements résidentiels (E1) et d’industrie

légère (E2).

La déclaration de conformité CE peut être obtenue auprès de : www.shure.

com/europe/compliance

Représentant agréé européen :

Shure Europe GmbH

Siège Europe, Moyen-Orient et Afrique

Service : Homologation EMA

Jakob-Dieffenbacher-Str. 12

75031 Eppingen, Allemagne

Téléphone : +49 7262 92490

Télécopie : +49 7262 9249114

Courriel : info@shure.de

Caractéristiques

Type de capsule Condensateur à électret

Courbe de directivité Superniere/keulenförmig

Réponse en fréquence VP89L : VP89M : VP89S :

40 à 20,000 Hz 50 à 20,000 Hz 65 à 20,000 Hz

Impédance de sortie 115,0 Ω

Sensibilité

tension en circuit ouvert, à 1

kHz, typique

-33,5 dBV/Pa[1]

(21,1 mV)

SPL maximum

1 kHz avec DHT de 1 %

[2]

Charge de 2500 Ω : 132,0 dB SPL

Charge de 1000 Ω : 128,5 dB SPL

Rapport signal/bruit[3] 79,0 dB

Plage dynamique

à 1 kHz

Charge de 2500 Ω : 117,0 dB

Charge de 1000 Ω : 113,5 dB

Niveau d'écrêtage

à 1 kHz, DHT de 1 %

Charge de 2500 Ω : 4,0 dBV

Charge de 1000 Ω : 0,0 dBV

Bruit propre

équivalent SPL, pondéré en

A, typique

15,0 dB

Rejet en mode commun

20 à 20,000 Hz ≥70,0 dB

Commutateur de filtre

basse fréquence

-12 dB/oct en dessous de la

fréquence spécifiée

Linearer

Frequenzgang : 100 Hz

Bassabsenkungs-

Rolloff : 200 Hz

Plage de températures de

fonctionnement -18°C (0°F) à 57°C (135°F)

Plage de températures de

stockage -29°C (-20°F) à 74°C (165°F)

Humidité relative de

fonctionnement 0 à 95%

Polarité Une pression acoustique positive sur le diaphragme produit une

tension positive sur la broche 2 par rapport à la broche 3.

Boîtier Anthrazitgrau-metallic-lackierter Griff aus Aluminiumlegierung

und Grill mit Edelstahl-Abschirmung

Alimentation 11–52 V c.c.[4] alimentation fantôme (IEC-61938), <2,0 mA

Poids net VP89L : VP89M : VP89S :

174 g (6,1 oz) 138 g (4,9 oz) 117 g (4,1 oz)

[1]

1 Pa=94 dB SPL

[2]

La DHT du préamplificateur du microphone appliquée au niveau du signal d’entrée est équiva-

lente au niveau de sortie de la capsule pour la valeur SPL spécifiée.

[3]

Le rapport signal/bruit est la différence entre le niveau SPL de 94 dB et le niveau SPL équiva-

lent du bruit propre pondéré A.

[4]

Toutes les caractéristiques techniques ont été mesurées avec une source d'alimentation

fantôme de 48 V c.c. Le microphone fonctionne à des tensions plus basses mais au prix d'une

plage dynamique et d'une sensibilité légèrement réduites.

CERTIFICATION

Eligible to bear CE Marking. Conforms to European EMC Directive

2004/108/EC. Meets Harmonized Standards EN55103-1:1996 and

EN55103-2:1996, for residential (E1) and light industrial (E2) environments.

The Declaration of Conformity can be obtained from:

Authorized European representative:

Shure Europe GmbH

Headquarters Europe, Middle East & Africa

Department: EMEA Approval

Jakob-Dieffenbacher-Str. 12

75031 Eppingen, Germany

Phone: +49 7262 92490

Fax: +49 7262 9249114

Email: info@shure.de

Product specificaties

Merk:	Shure
Categorie:	Microfoon
Model:	VP89
Kleur van het product:	Zwart
Hoogte:	386 mm
Soort:	Shotgun-microfoon
Materiaal behuizing:	Aluminium, Stainless steel
Stroombron:	DC
Connectiviteitstechnologie:	Bedraad
Diameter:	21 mm
Ingangsspanning:	11 - 52 V
Opbergetui:	Ja
Aansluiting:	XLR-3
Verpakkingsinhoud:	Microphone Clip A57F\n5/8” to 3/8” Thread Adapter 31A1856
Microphone direction type:	Hypercardioïde/subcardioïde microfoon
Gevoeligheid microfoon:	-33.5 dB
Spreekspoel types:	Condensor
Frequentie microfoon:	40 - 20000 Hz
Bedrijfstemperatuur (T-T):	-18 - 57 °C
Maximaal geluidsdrukniveau (1 kHz):	128.5 dB
Gewicht microfoon:	174 g
Output impedance:	115 Ohm
Microfoon Signal-to-Noise Ratio (SNR):	79 dB
Gevoeligheid (1 kHz):	21.1 mV/Pa
Microphone dynamic range:	113.5 dB
Eigenruis:	15 dB
Inclusief windscherm:	Ja