Shop-Vac 5987400 Handleiding

Shop-Vac Stofzuiger 5987400

Lees hieronder de 📖 handleiding in het Nederlandse voor Shop-Vac 5987400 (18 pagina's) in de categorie Stofzuiger. Deze handleiding was nuttig voor 92 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/18

User manual

Please review before operating vac.

Manual del usuario

Por favor lea esta manual antes de usar la aspiradora.

Series SS11, SS12, SS14, SS16

Wet/Dry Vacuum

Household and Workshop Use

Series SS11, SS12, SS14, SS16

Aspiradora para aspiración de residuos

Líquidos/Sólidos

Para Uso Doméstico y Comercial

ATTENTION!

Read all safety rules carefully

before attempting to operate.

Retain for future reference.

¡ATENCIÓN!

Lea cuidadosamente todas

las normas de seguridad

antes de utilizar la

aspiradora. Conserve esta

manual para consultas

futuras.

¡PELIGRO!

Nunca opere esta unidad ante

la presencia de materiales

o vapores inflamables dado

que los artefactos eléctricos

producen arcos o chispas

que pueden causar un

incendio o una explosión.

¡NO DEJE LA

ASPIRADORA

FUNCIONANDO SIN

VIGILANCIA!

DANGER!

Never operate this unit when

flammable materials or vapors

are present because electri-

cal devices produce arcs or

sparks that can cause a fire

or explosion.

NEVER OPERATE

UNATTENDED!

SHOP-VAC CORPORATION

2323 Reach Road, P.O. Box 3307

Williamsport, PA 17701-0307

(570) 326-3557

www.shopvac.com

SHOP-VAC CANADA

1770 Appleby Line

Burlington, Ontario L7L 5P8

(905) 335-9730

www.shopvac.ca

Shop Vac-México, S.A. de C.V.

Av. Mariano Otero #5095, Local 1 PB

Col. La Calma

Zapopan, Jalisco C.P. 45070

MÉXICO

52 (33) 3188 6388

Patents Issued and Pending.

Brevets délivrés et en instance.

Patentes registradas y en trámite.

87556-44

Manuel d’utilisation

Veuillez lire avant d’utiliser l’aspirateur.

Séries SS11, SS12, SS14, SS16

Aspirateur pour déchets secs et humides

Pour utilisation domestique ou dans les entrepôts

ATTENTION!

Lisez attentivement les in-

structions sur la sécurité

avant d’utiliser cet appareil.

Conservez ce manuel

pour vous y reporter

ultérieurement.

DANGER!

N’utilisez jamais cet

aspirateur en présence de

vapeurs ou de matières

inflammables. Les appareils

électriques produisent des

arcs ou des étincelles qui

peuvent causer un incendie

ou une explosion.

NE JAMAIS FAIRE

FONCTIONNER SANS

SURVEILLANCE!

BRAND/MARQUE/MARCA

This appliance is for use on a nominal

120-volt circuit, and has a grounded plug

that looks like the plug illustrated in sketch

A. A temporary adaptor that looks like

the adaptor illustrated in sketches B and

C may be used to connect this plug to a

2-pole receptacle as shown in if sketch B

a properly grounded outlet is not available.

The temporary adaptor should be used

only until a properly grounded outlet can be installed by a qualified electrician. (sketch A)

The green colored rigid ear, lug or the like extending from the adaptor must be connected to

a permanent ground such as a properly grounded outlet box cover. Whenever the adaptor is

used, it must be held in place by a metal screw.

IN CANADA, THE USE OF A TEMPORARY ADAPTOR IS NOT PERMITTED BY THE CANADIAN

ELECTRICAL CODE. Make sure that the appliance is connected to an outlet having the same

configuration as the plug. No adaptor should be used with this appliance.

This appliance must be grounded. If it should malfunction or break down, grounding provides

a path of least resistance for electric current to reduce the risk of electric shock. This

appliance is equipped with a cord having an equipment-grounding conductor and grounding

plug. The plug must be inserted into an appropriate outlet that is properly installed and

grounded in accordance with all local codes and ordinances.

WARNING – IMPROPER CONNECTION OF THE

EQUIPMENT-GROUNDING CONDUCTOR CAN RESULT IN A RISK OF

ELECTRIC SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR SERVICE

PERSON IF YOU ARE IN DOUBT AS TO WHETHER THE OUTLET IS

PROPERLY GROUNDED. DO NOT MODIFY THE PLUG PROVIDED WITH THE

APPLIANCE – IF IT WILL NOT FIT THE OUTLET, HAVE A PROPER OUTLET

INSTALLED BY A QUALIFIED ELECTRICIAN.

GROUNDING INSTRUCTIONS

UNPACKING AND SET-UP

1. Pull lid latches in an outward motion, remove tank cover and any accessories that may

have been shipped in the tank.

2. Attach caster system following the instructions and illustrations in this manual.

3. Before replacing tank cover, please refer to Dry Pick Up or Wet Pick Up Operation in this

manual to ensure you have the proper filters installed for your cleaning operation.

4. Replace tank cover, and apply pressure with thumb to each latch until it snaps tightly in

When using the appliance at a distance where an extension cord becomes necessary, a

3-conductor grounding cord of adequate size must be used for safety, and to prevent loss

of power and overheating. Use the table below to determine A.W.G. wire size required.

To determine ampere rating of your vacuum, refer to nameplate located on rear of motor

cover. Before using appliance, inspect power cord for loose or exposed wires and damaged

insulation. Make any needed repairs or replacements before using your appliance. Use only

three-wire outdoor extension cords which have three-prong grounding-type plugs and three-

pole receptacles which accept the extension cord’s plug. When vacuuming liquids, be sure the

extension cord connection does not come in contact with the liquid.

EXTENSION CORDS

When using an electrical appliance, basic precautions should always be followed, including

the following: READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE.

WARNING – TO REDUCE THE RISK OF FIRE, ELECTRIC

SHOCK OR INJURY:

1. Do not leave appliance when plugged in. Unplug from outlet when not in use and before

servicing. Connect to a properly grounded outlet only. See Grounding Instructions.

2. Do not expose to rain – store indoors.

3. Do not allow to be used as a toy. Close attention is necessary when used by or near

children.

4. Use only as described in this manual. Use only Manufacturer’s recommended

attachments.

5. Do not use with damaged cord or plug. If appliance is not working as it should, has been

dropped, damaged, left outdoors or dropped into water, contact Shop-Vac Corporation for

assistance.

6. Do Not: pull or carry by cord, use cord as a handle, close a door on cord or pull cord

around sharp edges or corners. Do not run appliance over cord. Keep cord away from

heated surfaces.

7. Do not unplug by pulling on cord. To unplug, grasp the plug: not the cord.

8. Do not handle plug or appliance with wet hands.

9. Do not put any object into openings. Do not use with any openings blocked; keep free of

dust, lint, hair and anything that may reduce air flow.

10. Keep hair, loose clothing, fingers and all parts of body away from openings and moving

parts.

11. Do not pick up anything that is burning or smoking, such as cigarettes, matches or hot

ashes.

12. Do not use without dust bag and/or filters in place.

13. Turn off all controls before unplugging.

14. Use extra care when cleaning on stairs.

15. Do not use to pick up flammable or combustible liquids such as gasoline or use in areas

where they may be present.

16. Do not use your cleaner as a sprayer of flammable liquids such as oil base paints,

lacquers, household cleaners, etc.

17. Do not vacuum toxic, carcinogenic, combustible or other hazardous materials such

as asbestos, arsenic, barium, beryllium, lead, pesticides or other health endangering

materials. Specially designed units are available for these purposes.

18. Do not pick up soot, cement, plaster or drywall dust without cartridge filter and collection

filter bag in place. These are very fine particles that may pass through the foam and affect

the performance of the motor or be exhausted back into the air. Additional collection filter

bags are available.

19. Do not leave the cord lying on the floor once you have finished the cleaning job. It can

become a tripping hazard.

20. Use special care when emptying heavily loaded tanks.

21. To avoid spontaneous combustion, empty tank after each use.

22. The operation of a utility vac can result in foreign objects being blown into eyes, which

can result in eye damage. Always wear safety goggles when operating vacuum.

23. STAY ALERT. Watch what you are doing and use common sense. Do not use vacuum

cleaner when you are tired, distracted or under the influence of drugs, alcohol or

medication causing diminished control.

24. WARNING! Do NOT use this vacuum cleaner to vacuum lead paint debris because this may

disperse fine lead particles into the air. This vacuum cleaner is not intended for use under

EPA Regulation 40 CFR Part 745 for lead paint material cleanup.

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

WARNING – DO NOT LEAVE VACUUM UNATTENDED WHEN IT IS PLUGGED IN AND/OR OPERATING. UNPLUG UNIT WHEN NOT IN USE.

Volts Total length of cord in feet

120V

Ampere Rating

More Not More

Than Than

0 - 6

6 - 10

10 - 12

12 - 16

25 50 100 150

AWG

Not ommendedrec

place. Make sure all lid latches are clamped securely.

5. Insert machine hose end into inlet of tank. Twist slightly

to tighten the connection (Figure A).

6. Attach the extension wands (not standard with all

models) to the accessory end of the hose. Twist slightly

to tighten the connection (Figure A).

7. Attach one of the cleaning accessories (depending on

your cleaning requirements) to the extension wands.

NOTE: STATIC SHOCKS ARE COMMON

IN DRY AREAS OR WHEN THE RELATIVE

HUMIDITY OF THE AIR IS LOW. THIS IS

ONLY TEMPORARY AND DOES NOT AFFECT

THE USE OF THE APPLIANCE. TO REDUCE

THE FREQUENCY OF STATIC SHOCKS IN

YOUR HOME, THE BEST REMEDY IS TO ADD

MOISTURE TO THE AIR WITH A CONSOLE OR

INSTALLED HUMIDIFIER.

Not all units are equipped with the same caster system. Follow the

instructions, which apply to your specific unit.

Without Caster Feet

You will find four casters with your wet/dry vacuum. Assemble as follows:(Figure 1)

1. With cord disconnected from receptacle and tank cover removed, turn tank upside down

so that bottom is facing up.

2. Insert casters into bottom of tank by placing stem of caster into holes provided. Apply

pressure and

twisting motion until casters snap into place

(Figure 2).

3. Return tank to upright position.

CASTER SYSTEM ASSEMBLY

Twist slightly to tighten the connection (Figure A).

8. Plug the cord into the wall outlet. Your cleaner is ready for use.

I = ON, O =OFF

NOTE: MANY MORE USEFUL TOOLS ARE AVAILABLE AT YOUR LOCAL DEALER OR SHOP-VAC®

WEBSITE.

1 2

3 4

With Caster Feet

If your caster feet look like the ones pictured in follow these Figure 3,

instructions.

You will find four caster feet , four casters , and four screws with your (Figure 3) (Figure 4)

wet/dry vacuum. Assemble as follows:

1. With cord disconnected from receptacle and tank cover removed, turn tank upside

down so that bottom is facing up.

2. Remove any webbing that attaches the caster feet to each other.

3. With front of tank inlet facing you, take caster feet marked with the letter A (Figure 5)

and insert stem of caster foot into holes on left front and right rear of tank also marked

with letter A (Figure 6). Make sure caster feet are fully inserted into tank bottom and

secure with screws provided (Figure 7).

4. Take caster feet marked with the letter B and insert stem of caster foot into (Figure 8)

holes on right front and left rear of tank also marked with the letter B Make (Figure 9).

sure caster feet are fully inserted into tank bottom and secure with screws provided

(Figure 10).

5. Insert casters into feet by placing stem of caster into holes provided. Apply pressure

and twisting motion until casters snap into place (Figure 11).

6. Return tank to upright position.

9 10 11

If your caster feet look like the ones pictured in follow these Figure 12,

instructions.

You will find four caster feet , four casters and four screws with your (Figure 12) (Figure 13)

wet/dry vacuum. Assemble as follows:

1. With cord disconnected from receptacle and tank cover removed, turn tank upside down so

that bottom is facing up.

2. With front of tank facing you, take caster feet marked with the letter A and (Figure 14)

place in slots on left front and right rear of tank also marked with the letter A (Figure 15).

Secure with screws provided (Figure 16).

3. Take caster feet marked with the letter B and place in slots on right front and (Figure 17)

left rear of tank also marked with the letter B . Secure with screws provided(Figure 18)

(Figure 19).

4. If flat washers are included in hardware package place flat washer over stem of caster

before installing casters into feet. Flat washers are not required with all units.NOTE:

5. Insert casters into feet by placing stem of caster into holes provided. Apply pressure and

twisting motion until casters snap into place . Return tank to upright position.(Figure 20)

12 13

18 19 20

With Rear Caster Dolly/Tool Holder

You will find four casters , two caster feet , rear caster dolly/tool holder (Figure 21) (Figure 22)

(Figure 23), and four screws with your wet/dry vacuum. Assemble as follows:

21 22 23

1. With cord disconnected from receptacle and tank cover removed, turn tank upside down so

that the bottom is facing up.

2. Take rear caster dolly and place into slots (on rear of tank, opposite of drain) and secure

with screws provided (Figure 24).

3. If flat washers are included in hardware package place flat washer over stem of caster

before installing casters into feet. Flat washers are not required with all units.NOTE :

4. Insert casters into bottom of rear caster dolly by placing stem of caster into holes provided.

Apply pressure and twisting motion until casters snap into place (Figure 25).

5. With tank drain facing you, take caster foot marked with the letter A and place (Figure 26)

in slot on left side of tank also marked with the letter A. Secure with screw provided

(Figure 27).

6. Take caster foot marked with the letter B and place in slot on right side of tank (Figure 28)

also marked with the letter B. Secure with screw provided (Figure 29).

7. Insert casters into feet by placing stem of casters into holes provided. Apply pressure and

twisting motion until casters snap into place (Figure 30).

8. Return tank to upright position.

9. Place tool basket with curved surface against tank on rear (not standard with all models)

caster dolly assembly (Figure 31).

24 25

Product specificaties

Merk:	Shop-Vac
Categorie:	Stofzuiger
Model:	5987400
Kleur van het product:	Black, Yellow
Gewicht:	- g
Snoerlengte:	3.65 m
Geluidsniveau:	- dB
Jaarlijks energieverbruik:	- kWu
Gewicht verpakking:	11600 g
Breedte verpakking:	501.6 mm
Diepte verpakking:	501.6 mm
Hoogte verpakking:	616 mm
Stroombron:	AC
Soort reiniging:	Droog en nat
Stof capaciteit:	60.5 l
Maximaal ingangsvermogen:	- W
Stroom:	12 A
Aantal wielen:	4 wiel(en)
Flexibele slang:	Ja
Correct gebruik:	Thuis
Reinigt ondergronden:	Carpet, Hard floor
Stof blazer:	Ja
Input vermogen:	370 W
Inhoud:	60.5 l
Slang diameter:	63.5 mm
Lengte van slang:	2.4 m
AC-ingangsspanning:	120 V
AC-ingangsfrequentie:	60 Hz