Shop-Vac 5982500 Handleiding

Shop-Vac Stofzuiger 5982500

Lees hieronder de 📖 handleiding in het Nederlandse voor Shop-Vac 5982500 (12 pagina's) in de categorie Stofzuiger. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/12

User manual

Please review before operating vac.

Manual del usuario

Por favor lea esta manual antes de usar la aspiradora.

Series SS11, SS12, SS14, SS16

Wet/Dry Vacuum

Household and Workshop Use

Series SS11, SS12, SS14, SS16

Aspiradora para aspiración de residuos

Líquidos/Sólidos

Para Uso Doméstico y Comercial

ATTENTION!

Read all safety rules carefully

before attempting to operate.

Retain for future reference.

¡ATENCIÓN!

Lea cuidadosamente todas

las normas de seguridad

antes de utilizar la aspira-

dora. Conserve esta man-

ual para consultas futuras.

¡PELIGRO!

Nunca opere esta unidad ante

la presencia de materiales o

vapores inflamables dado que

los artefactos eléctricos pro-

ducen arcos o chispas que

pueden causar un incendio o

una explosión.

¡NO DEJE LA ASPI-

RADORA FUNCIO-

NANDO SIN VIGI-

LANCIA!

DANGER!

Never operate this unit when

flammable materials or vapors

are present because electri-

cal devices produce arcs or

sparks that can cause a fire

or explosion.

NEVER OPERATE

UNATTENDED!

SHOP-VAC CORPORATION

2323 Reach Road, P.O. Box 3307

Williamsport, PA 17701-0307

(570) 326-3557

www.shopvac.com

SHOP-VAC CANADA

1770 Appleby Line

Burlington, Ontario L7L 5P8

(905) 335-9730

www.shopvac.ca

Shop Vac-México, S.A. de C.V.

Av. Mariano Otero #5095, Local 1 PB

Col. La Calma

Zapopan, Jalisco C.P. 45070

MÉXICO

52 (33) 3188 6388

Patents Issued and Pending.

Brevets dé livrés et en instance.

Patentes registradas y en trámite.

Manuel d’utilisation

Veuillez lire avant d’utiliser l’aspirateur.

Series SS11, SS12, SS14, SS16

Aspirateur pour Déchets Secs et Humides

Pour Utilisation Domestique ou dans les Entrepôts

ATTENTION!

Lisez attentivement les in-

structions sur la sécurité

avant d’utiliser cet appareil.

Conservez cette Notice pour

vous y reporter ultérieurement.

DANGER!

N’utilisez jamais cet aspira-

teur en présence de vapeurs

ou de matières inflammables.

Les appa-reils électriques

produisent des arcs ou des

étincelles qui peuvent causer

un incendie ou une explosion.

NE JAMAIS FAIRE

FONCTIONNER SANS

SURVEILLANCE!

BRAND/MARQUE/MARCA

in sketches B and C may be used

to connect this plug to a 2-pole

receptacle as shown in sketch B

if a properly grounded outlet is not

available. The temporary adaptor

should be used only until a properly

grounded outlet ( ) can be sketch A

installed by a qualified electrician.

The green colored rigid ear, lug or

the like extending from the adaptor

must be connected to a permanent

ground such as a properly grounded outlet box cover. Whenever the adaptor is used, it must be

held in place by a metal screw.

IN CANADA, THE USE OF A TEMPORARY ADAPTOR IS NOT PERMITTED BY THE CANADIAN

ELECTRICAL CODE. Make sure that the appliance is connected to an outlet having the same

configuration as the plug. No adaptor should be used with this appliance.

This appliance must be grounded. If it should malfunction or breakdown, grounding provides

a path of least resistance for electric current to reduce the risk of electric shock. This appli-

ance is equipped with a cord having an equipment-grounding conductor and grounding plug.

The plug must be inserted into an appropriate outlet that is properly installed and grounded in

accordance with all local codes and ordinances.

WARNING – IMPROPER CONNECTION OF THE EQUIPMENT-

GROUNDING CONDUCTOR CAN RESULT IN A RISK OF ELECTRIC SHOCK.

CHECK WITH A QUALIFIED ELECTRICIAN OR SERVICE PERSON IF YOU

ARE IN DOUBT AS TO WHETHER THE OUTLET IS PROPERLY GROUNDED.

DO NOT MODIFY THE PLUG PROVIDED WITH THE APPLIANCE – IF IT WILL

NOT FIT THE OUTLET, HAVE A PROPER OUTLET INSTALLED BY A QUALI-

FIED ELECTRICIAN.

This appliance is for use on a nominal 120-volt circuit, and has a grounded plug that looks

like the plug illustrated in . A temporary adaptor that looks like the adaptor illustrated sketch A

GROUNDING INSTRUCTIONS

UNPACKING AND SET-UP

1. Pull lid latches in an outward motion, remove tank cover and any accessories that may have

been shipped in the tank.

2. Attach caster system following the instructions and illustrations in this manual.

3. Before replacing tank cover, please refer to Dry Pick Up or Wet Pick Up Operation in this

manual to ensure you have the proper filters installed for your cleaning operation.

4. Replace tank cover, and apply pressure with thumb to each latch until it snaps tightly in

place. Make sure all lid latches are clamped securely.

Insert machine hose end into inlet of tank. Twist slightly to tighten the connection (Figure A).

When using the appliance at a distance where an extension cord becomes necessary, a 3-conductor

grounding cord of adequate size must be used for safety, and to prevent loss of power and overheating.

Use the table below to determine A.W.G. wire size required. To determine ampere rating of your vacuum,

refer to nameplate located on rear of motor cover. Before using appliance, inspect power cord for loose

or exposed wires and damaged insulation. Make any needed repairs or replacements before using

your appliance. Use only three-wire outdoor extension cords which have three-prong grounding-type

plugs and three-pole receptacles which accept the extension cord’s plug. When vacuuming liquids, be

sure the extension cord connection does not come in contact with the liquid.

NOTE: STATIC SHOCKS ARE COMMON IN DRY AREAS OR WHEN THE RELATIVE HUMIDITY OF THE AIR IS

LOW. THIS IS ONLY TEMPORARY AND DOES NOT AFFECT THE USE OF THE APPLIANCE. TO REDUCE THE

FREQUENCY OF STATIC SHOCKS IN YOUR HOME, THE BEST REMEDY IS TO ADD MOISTURE TO THE AIR

WITH A CONSOLE OR INSTALLED HUMIDIFIER.

EXTENSION CORDS

When using an electrical appliance, basic precautions should always be followed, including the

following: READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE.

WARNING – TO REDUCE THE RISK OF FIRE, ELECTRIC

SHOCK OR INJURY:

1. Do not leave appliance when plugged in. Unplug from outlet when not in use and before

servicing. Connect to a properly grounded outlet only. See Grounding Instructions.

2. Do not expose to rain – store indoors.

3. Do not allow to be used as a toy. Close attention is necessary when used by or near chil-

dren.

4. Use only as described in this manual. Use only Manufacturer’s recommended attachments.

5. Do not use with damaged cord or plug. If appliance is not working as it should, has been

dropped, damaged, left outdoors or dropped into water, contact Shop-Vac Corporation for

assistance.

6. Do Not: pull or carry by cord, use cord as a handle, close a door on cord or pull cord around

sharp edges or corners. Do not run appliance over cord. Keep cord away from heated sur-

faces.

7. Do not unplug by pulling on cord. To unplug, grasp the plug; not the cord.

8. Do not handle plug or appliance with wet hands.

9. Do not put any object into openings. Do not use with any openings blocked; keep free of dust,

lint, hair and anything that may reduce air flow.

10. Keep hair, loose clothing, fingers and all parts of body away from openings and moving

parts.

11. Do not pick up anything that is burning or smoking, such as cigarettes, matches or hot

ashes.

12. Do not use without dust bag and/or filters in place.

13. Turn off all controls before unplugging.

14. Use extra care when cleaning on stairs.

15. Do not use to pick up flammable or combustible liquids such as gasoline or use in areas where

they may be present.

16. Do not use your cleaner as a sprayer of flammable liquids such as oil base paints, lacquers,

household cleaners, etc.

17. Do not vacuum toxic, carcinogenic, combustible or other hazardous materials such as

asbestos, arsenic, barium, beryllium, lead, pesticides or other health endangering materials.

Specially designed units are available for these purposes.

18. Do not pick up soot, cement, plaster or drywall dust without cartridge filter and collection

filter bag in place. These are very fine particles that may pass through the foam and affect the

performance of the motor or be exhausted back into the air. Additional collection filter bags are

available.

19. Do not leave the cord lying on the floor once you have finished the cleaning job. It can become

a tripping hazard.

20. Use special care when emptying heavily loaded tanks.

21. To avoid spontaneous combustion, empty tank after each use.

22. The operation of a utility vac can result in foreign objects being blown into eyes, which can

result in eye damage. Always wear safety goggles when operating vacuum.

23. STAY ALERT. Watch what you are doing and use common sense. Do not use vacuum cleaner

when you are tired, distracted or under the influence of drugs, alcohol or medication causing

diminished control.

24. WARNING! Do NOT use this vacuum cleaner to vacuum lead paint debris because this may

disperse fine lead particles into the air. This vacuum cleaner is not intended for use under EPA

Regulation 40 CFR Part 745 for lead paint material cleanup.

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

WARNING – DO NOT LEAVE VACUUM UNATTENDED WHEN IT IS PLUGGED IN AND/OR OPERATING. UNPLUG UNIT WHEN NOT IN USE.

Volts Total length of cord in feet

120V

Ampere Rating

More Not More

Than Than

0 - 6

6 - 10

10 - 12

12 - 16

25 50 100 150

AWG

Not ommendedrec

6. Attach the extension wands (not standard with all

models) to the accessory end of the hose. Twist

slightly to tighten the connection (Figure A).

7. Attach one of the cleaning accessories (depending on

your cleaning requirements) to the extension wands.

Twist slightly to tighten the connection (Figure A).

8. Plug the cord into the wall outlet. Your cleaner is ready for use.

I = ON, O =OFF

NOTE: MANY MORE USEFUL TOOLS ARE AVAILABLE AT YOUR LOCAL DEALER OR SHOP-VAC®

WEBSITE: WWW.SHOPVAC.COM (U.S.A.), WWW.SHOPVAC.CA (CANADA).

WARNING – ALWAYS DISCONNECT THE PLUG FROM

THE WALL OUTLET BEFORE REMOVING THE TANK COVER.

When using the reusable dry filter to pick up dust and dry

material, you must install foam sleeve and reusable dry

filter to ensure proper filtration. If the vacuum has been

used to pick up liquids, the foam sleeve must be cleaned

and dried before installing for dry pick up. With tank cover

in an upside down position, slide foam sleeve down over lid

cage pulling until foam sleeve completely covers lid cage

(Figures 38, 39). Center the reusable dry filter on lid cage

(Figure 40), slide mounting ring down over filter until ring is

positioned against the ribs of the lid cage (Figure 41). The

reusable dry filter should always be in position over the foam

sleeve for dry pick up. To remove the filter for cleaning, remove mounting ring

and filter from lid cage . To clean the reusable dry filter, shake off (Figure 42)

excess dirt and dust or (depending on the condition of the filter) rinse with water.

Allow the filter to dry completely and re-install. DO NOT MACHINE WASH OR DRY.

(Not standard with all models)

INSTALLING FOAM SLEEVE AND REUSABLE

DRY FILTER

38 39

Not all units are equipped with the same caster system. Follow the instruc-

tions, which apply to your specific unit.

Without Caster Feet

You will find four casters with your wet/dry vacuum. Assemble as follows:(Figure 1)

1. With cord disconnected from receptacle and tank cover removed, turn tank upside down so

that bottom is facing up.

2. Insert casters into bottom of tank by placing stem

of caster into holes provided. Apply pressure and

twisting motion until casters snap into place

(Figure 2).

3. Return tank to upright position.

CASTER SYSTEM ASSEMBLY

TOOL HOLDER

(Not standard with all models)

If your tool holder looks like the one pictured in , follow these instructions. Figure 32

1. With rear of unit facing you, take tool holder and position it with tabs facing rear of unit

(Figure 33).

2. Place “J” shaped tabs into the slots on cord wraps (Figure 34).

3. Press down until tabs snap into place.

4. Press down on center of tool holder until tab latches on bottom lid (Figure 35).

If your tool holder looks like the one pictured in , follow these instructions.Figure 36

1. With rear of unit facing you, take tool holder and slide over notches on rear of tank (Figure 37).

If your caster feet look like the ones pictured in Figure 12, follow these instructions.

You will find four caster feet , four casters and four screws with your (Figure 12) (Figure 13)

wet/dry vacuum. Assemble as follows:

1. With cord disconnected from receptacle and tank cover removed, turn tank upside down so

that bottom is facing up.

2. With front of tank facing you, take caster feet marked with the letter A and place (Figure 14)

in slots on left front and right rear of tank also marked with the letter A . Secure (Figure 15)

with screws provided (Figure 16).

3. Take caster feet marked with the letter B and place in slots on right front and (Figure 17)

left rear of tank also marked with the letter B . Secure with screws provided(Figure 18)

(Figure 19).

4. If flat washers are included in hardware package place flat washer over stem of caster before

installing casters into feet. Flat washers are not required with all units.NOTE:

5. Insert casters into feet by placing stem of caster into holes provided. Apply pressure and

twisting motion until casters snap into place . Return tank to upright position.(Figure 20)

With Caster Feet

If your caster feet look like the ones pictured in Figure 3, follow these instructions.

You will find four caster feet , four casters , and four screws with your (Figure 3) (Figure 4)

wet/dry vacuum. Assemble as follows:

1. With cord disconnected from receptacle and tank cover removed, turn tank upside down

so that bottom is facing up.

2. Remove any webbing that attaches the caster feet to each other.

3. With front of tank inlet facing you, take caster feet marked with the letter A (Figure 5) and

insert stem of caster foot into holes on left front and right rear of tank also marked with

letter A (Figure 6). Make sure caster feet are fully inserted into tank bottom and secure with

screws provided (Figure 7).

4. Take caster feet marked with the letter B and insert stem of caster foot into (Figure 8)

holes on right front and left rear of tank also marked with the letter B Make (Figure 9).

sure caster feet are fully inserted into tank bottom and secure with screws provided

(Figure 10).

5. Insert casters into feet by placing stem of caster into holes provided. Apply pressure and

twisting motion until casters snap into place (Figure 11).

6. Return tank to upright position.

With Rear Caster Dolly/Tool Holder

You will find four casters , two caster feet , rear caster dolly/tool holder (Figure 21) (Figure 22)

(Figure 23), and four screws with your wet/dry vacuum. Assemble as follows:

1. With cord disconnected from receptacle and tank cover removed, turn tank upside down so

that the bottom is facing up.

2. Take rear caster dolly and place into slots (on rear of tank, opposite of drain) and secure with

screws provided (Figure 24).

3. If flat washers are included in hardware package place flat washer over stem of caster before

installing casters into feet. Flat washers are not required with all units.NOTE :

4. Insert casters into bottom of rear caster dolly by placing stem of caster into holes provided.

Apply pressure and twisting motion until casters snap into place (Figure 25).

5. With tank drain facing you, take caster foot marked with the letter A and (Figure 26)

place in slot on left side of tank also marked with the letter A. Secure with screw provided

(Figure 27).

6. Take caster foot marked with the letter B and place in slot on right side of tank (Figure 28)

also marked with the letter B. Secure with screw provided (Figure 29).

7. Insert casters into feet by placing stem of casters into holes provided. Apply pressure and

twisting motion until casters snap into place (Figure 30).

8. Return tank to upright position.

9. Place tool basket with curved surface against tank on rear (not standard with all models)

caster dolly assembly (Figure 31).

DRY PICK UP

1312

15 16

(Not standard with all models)

NOTE: If foam sleeve is in position over lid cage, it must be removed before installing cartridge

filter.

INSTALLING THE CARTRIDGE FILTER

The cartridge filter can be used for wet or dry pick up;

installation is the same for both. When picking up large

quantities of liquid please refer to the Wet Pick Up Operation

section in this manual. Use the cartridge filter in posi-

tion over the lid cage for most general dry material pick

up. With the tank cover in an upside down position, slide

Product specificaties

Merk:	Shop-Vac
Categorie:	Stofzuiger
Model:	5982500
Kleur van het product:	Black, Grey, Red
Gewicht:	- g
Snoerlengte:	1.82 m
Geluidsniveau:	- dB
Jaarlijks energieverbruik:	- kWu
Gewicht verpakking:	5443 g
Breedte verpakking:	345.4 mm
Diepte verpakking:	345.4 mm
Hoogte verpakking:	495.3 mm
Stroombron:	AC
Soort reiniging:	Droog en nat
Stof capaciteit:	19 l
Maximaal ingangsvermogen:	- W
Stroom:	7.5 A
Aantal wielen:	4 wiel(en)
Flexibele slang:	Ja
Stof blazer:	Ja
Luchtstroom:	28.3 l/s
Input vermogen:	95 W
Inhoud:	18.92 l
Slang diameter:	31.7 mm
Lengte van slang:	2.1 m
AC-ingangsspanning:	120 V
AC-ingangsfrequentie:	60 Hz