Sharp PG-MB66X Handleiding

Sharp Beamer PG-MB66X

Lees hieronder de 📖 handleiding in het Nederlandse voor Sharp PG-MB66X (70 pagina's) in de categorie Beamer. Deze handleiding was nuttig voor 54 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/70

Introduction Quick Start Setup Connections Basic

Operation

Useful

Features Appendix

MULTIMEDIA PROJECTOR

MODEL

PG-MB66X/PG-MB56X

XG-MB50X-L

XR-11XC-L

XR-10X-L/XR-10S-L

OPERATION MANUAL

IMPORTANT

• For your assistance in reporting the loss

or theft of your Projector, please record

the Model and Serial Number located on

the bottom of the projector and retain this

information.

• Before recycling the packaging, please

ensure that you have checked the con-

tents of the carton thoroughly against the

list of “Supplied accessories” on page 10.

Model No.:

Serial No.:

Introduction

Before using the projector, please read this operation manual carefully.

There are two important reasons for prompt warranty registration of your new SHARP

Projector, using the REGISTRATION CARD packed with the projector.

1. WARRANTY

This is to assure that you immediately receive the full benefit of the parts, service

and labor warranty applicable to your purchase.

2. CONSUMER PRODUCT SAFETY ACT

To ensure that you will promptly receive any safety notification of inspection,

modification, or recall that SHARP may be required to give under the 1972

Consumer Product Safety Act, PLEASE READ CAREFULLY THE IMPORTANT

“LIMITED WARRANTY” CLAUSE.

WARNING: High brightness light source. Do not stare into the beam of light, or view

directly. Be especially careful that children do not stare directly into the

beam of light.

WARNING: To reduce the risk of fire or electric shock, do not expose

this product to rain or moisture.

WARNING: FCC Regulations state that any unauthorized changes or modifications to

this equipment not expressly approved by the manufacturer could void

the user’s authority to operate this equipment.

The lightning flash with arrowhead sym-

bol, within an equilateral triangle, is in-

tended to alert the user to the presence

of uninsulated “dangerous voltage”

within the product’s enclosure that may

be of sufficient magnitude to constitute

a risk or electric shock to persons.

The exclamation point within a triangle

is intended to alert the user to the

presence of important operating and

maintenance (servicing) instructions in

the literature accompanying the product.

Introduction ENGLISH

See bottom of projector.

U.S.A. ONLY

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER.

NO USER-SERVICEABLE PARTS EXCEPT LAMP UNIT.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT REMOVE SCREWS

EXCEPT SPECIFIED USER

SERVICE SCREW.

WARNING:

The cooling fan in this projector continues to run for about 90 seconds after the projector enters

standby mode. During normal operation, when putting the projector into standby mode always

use the STANDBY/ON button on the projector or the STANDBY button on the remote control.

Ensure the cooling fan has stopped before disconnecting the power cord.

DURING NORMAL OPERATION, NEVER TURN THE PROJECTOR OFF BY DISCONNECTING

THE POWER CORD. FAILURE TO OBSERVE THIS WILL RESULT IN PREMATURE LAMP FAILURE.

Product specificaties

Merk:	Sharp
Categorie:	Beamer
Model:	PG-MB66X
Gewicht:	3900 g
Geluidsniveau:	35 dB
Stroomvoorziening:	AC 100 - 240 V
Connectiviteitstechnologie:	Bedraad
Typische contrastverhouding:	2000:1
Projector helderheid:	3000 ANSI lumens
Projectietechnologie:	DLP
Projector native resolution:	XGA (1024x768)
Geschikt voor schermmaten:	300 "
Frequentiebereik horizontaal:	15 - 70 kHz
Frequentiebereik verticaal:	45 - 85 Hz
VGA (D-Sub)poort(en):	2
Soort serieële aansluiting:	RS-232
Composiet video-ingang:	1
Componentingang video (YPbPr/YCbCr):	1
S-Video ingang:	1
Focus:	Handmatig
Brandpuntbereik:	18.7 - 21.5 mm
Levensduur van de lichtbron:	2000 uur
Gemiddeld vermogen:	2 W
Aantal ingebouwde luidsprekers:	1
Stroomverbruik (in standby):	4.7 W
Certificering:	UL, FCC Class B
Formaat analoog signaal:	NTSC,NTSC 3.58,NTSC 4.43,SECAM
RS-232 port:	1
Audio-ingangen:	1
Plug and play:	Ja
Temperatuur bij opslag:	-20 - 60 °C
Levensduur van de lichtbron (besparingsmodus):	3000 uur
Dot clock scanfrequentie:	108 MHz
Afmetingen (B x D x H):	315 x 295 x 119 mm
Warmtedissipatie:	1315 BTU/h
Stroomverbruik (typisch):	350 W
Bedrijfstemperatuur (T-T):	5 - 35 °C