Sharp LC-65XUF8772ES Handleiding

Sharp Televisie LC-65XUF8772ES

Lees hieronder de 📖 handleiding in het Nederlandse voor Sharp LC-65XUF8772ES (76 pagina's) in de categorie Televisie. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/76

User manual

Benutzerhandbuch

Manuel d'utilisation

Manuale di istruzioni

Manual de instrucciones

Manual do utilizador

Instrukcja obsługi

Gebruikershandleiding

LC-43XUF8772ES

LC-49XUF8772ES

LC-55XUF8772ES

LC-65XUF8772ES

2825

22 23

26 27

Important safety instructions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Please, read these safety instructions and respect

the following warnings before the appliance is

operated:

In order to prevent  re always

keep candles and other open

 ames away from this product.

• TV’swith the weight of more than 20 kg must be lifted and carried by at

least two people.

• This TV does not contain any parts which could be repaired by the user.

In case of afault, contact the manufacturer or the authorised service

agent. Contact with certain parts inside the TV might endanger your life.

The guarantee does not extend to faults caused by repairs carried out by

unauthorized third parties.

• Do not remove the rear part of the appliance.

• This appliance is designed for the receiving and reproduction of video

and sound signals. Any other use is strictly forbidden.

• Do not expose the TV to dripping or splashing liquid.

• To disconnect the TV from mains please unplug the mains plug from the

mains socket.

• If the supply cord is damaged, it must be replaced by the manufacturer,

aservice agent or similarly quali ed persons in order to avoid ahazard.

• The ideal distance to watch TV is approximately  ve times longer than

the diagonal of the screen. Re ections on the screen from other light

sources can make the quality of the picture worse.

• Ensure the TV has su cient ventilation and is not close to other appli-

ances and other pieces of furniture.

• Install the product at least 5 cm from the wall for ventilation.

• Ensure that the ventilation openings are clear of items such as newspa-

pers, table-cloths, curtains, etc.

• The TV set is designed to be used in amoderate climate.

• The TV set is designed exclusively for operation in adry place. When

using the TV outside, please, make sure it is protected against moisture

(rain, splashing water). Never expose to moisture.

• Do not place any objects, containers  lled with liquids, such as vases,

etc. on the TV. These containers might get pushed over, which would

endanger electric safety. Place the TV exclusively on  at and stable

surfaces. Do not place any objects such as newspaper or blankets, etc.

on or under the TV.

• Make sure the appliance does not stand on any power cables as they

might get damaged. Mobile phones and other devices such as WLAN

adapters, monitoring cameras with wireless signal transmission, etc.

might cause electromagnetic interference and they should not be

placed near the appliance.

• Do not place the appliance near heating elements or in aplace with

direct sunlight as it has anegative e ect on cooling of the appliance.

Heat storage is dangerous and it can seriously reduce the lifetime of the

appliance. In order to ensure the safety, ask aquali ed person to remove

the dirt from the appliance.

• Try to prevent damage to the mains cable or mains adapter. The appli-

ance can only be connected with the supplied mains cable/ adapter.

• Storms are dangerous for all electric appliances. If the mains or aerial

wiring is struck by lightening the appliance might get damaged, even if

it is turned o . You should disconnect all the cables and connectors of

the appliance before astorm.

• To clean the screen of the appliance use only adamp and soft cloth. Use

only clean water, never detergents and in no case use solvents.

• Position the TV close to the wall to avoid the possibility of it falling when

pushed.

• WARNING - Never place a television set in an unstable location. A televi-

sion set may fall, causing serious personal injury or death. Many injuries,

particularly to children, can be avoided by taking simple precautions

such as:

• Use cabinets or stands recommended by the manufacturer of the

television set.

• Only use furniture that can safely support the television set.

• Ensure the television set is not overhanging the edge of the supporting

furniture.

• Not place the television set on tall furniture (for example, cupboards or

bookcases) without anchoring both the furniture and the television set

to a suitable support.

• Not place the television set on cloth or other materials that may be

located between the television set and supporting furniture.

• Educate children about the dangers of climbing on furniture to reach the

television set or its controls.

• Ensure that children do not climb or hang onto the TV.

• If your existing television set is being retained and relocated, the same

considerations as above should be applied.

• The instructions shown below are asafer way to set up the TV, by ﬁxing it

to the wall and will avoid the possibility of it falling forwards and causing

injury and damage.

• This method is also useful the TV is placed on aglass surface or you do

not wish to screw anything into your furniture.

• For this type of installation you will need afastening cord

A) Using one/both of the top wall-mounting holes and screws (the

screws are already supplied in the wall mounting holes) fasten one end

of the fastening chord/sto the TV.

B) Secure the other end of the fastening chord/sto your wall.

• The software on your TV and the OSD layout can be changed without

notice.

Warning:

• Never connect any external devices to alive appliance. Switch o not

only the TV but also the devices which are being connected! Plug the

TV plug into the wall socket after connecting any external devices and

the aerial!

• Always make sure there is free access to the TV mains plug.

• The appliance is not designed for ause in aworkplace  tted with

monitors.

• The systematic use of headphones at high volume might lead to irrevers-

ible hearing damage.

• Ensure environmental disposal of this appliance and any components

including batteries. When in doubt, please, contact your local authority

for details of recycling.

• While installing the appliance, do not forget that furniture surfaces are

treated with various varnishes, plastics, etc. or they might be polished.

The chemicals contained in these products might have areaction with

the TV stand. This could result in bits of the material sticking to the furni-

ture surface, which are di cult to remove, if not impossible.

• The screen of your TV has been produced under top quality conditions

and was checked in detail for faulty pixels several times. Due to the tech-

nological properties of the manufacturing process, it is not possible to

eliminate the existence of asmall number of faulty points on the screen

(even with maximum care while in production). These faulty pixels are

not considered faults in terms of guarantee conditions, if their extent is

not greater than the boundaries de ned by DIN norm.

• The manufacturer cannot be held responsible, or be liable, for customer

service-related issues related to the third party content or services. Any

questions, comments or service-related inquiries relating to the third

party content or service should be made directly to the applicable

content or service provider.

• There are a variety of reasons you may be unable to access content or

services from the device unrelated to the device itself, including, but not

limited to, power failure, the Internet connection, or failure to con gure

your device correctly. Universal Media Corporation, its directors, o cers,

employees, agents, contractors and a liates shall not be liable to you

or any third party with respect to such failures or maintenance outages,

regardless of cause or whether or not it could have been avoided.

• All third party content or services accessible via this device is provided to

you on an “as-is” and “as available” basis and Universal Media Corporation

and its a liates make no warranty or representation of any kind to you,

either express or implied, including, without limitation, any warranties

of merchantability, non-infringement,  tness for a particular purpose

or any warranties of suitability, availability, accuracy, completeness, se-

curity, title, usefulness, lack of negligence or error-free or uninterrupted

operation or use of the content or services provided to you or that the

content or services will meet your requirements or expectations.

• ‘Universal Media Corporation’ is not an agent of and assumes no

responsibility for the acts or omissions of third party content or service

providers, nor any aspect of the content or service related to such third

party providers.

• In no event will ‘Universal Media Corporation’ and/or its a liates be

liable to you or any third party for any direct, indirect, special, incidental,

punitive, consequential or other damages, whether the theory of liability

is based on contract, tort, negligence, breach of warranty, strict liability

or otherwise and whether or not Universal Media Corporation and/or its

a liates have been advised of the possibility of such damages.

Important information regarding use of video

games, computers, captions and other  xed image

displays.

• The extended use of  xed image program material can cause aperma-

nent “shadow image “ on the LCD screen (this is sometimes incorrectly

referred to as “burnout to the screen“). This shadow image is then perma-

nently visible on the screen in the background. It is irreversible damage.

You can avoid such adamage by following instructions below:

• Reduce the brightness/contrast setting to aminimum viewing level.

• Do not display the  xed image for along period of time. Avoid display-

ing of:

» Teletext time and charts,

» TV/DVD menu, e.g. DVD contents,

» In the„Pause“ mode (hold): Do not use this mode for along time,

e.g. while watching aDVD or avideo.

» Turn o the appliance if you are not using it.

Batteries

• Observe the correct polarity when inserting the batteries.

• Do not expose batteries to high temperatures and

do not place them on locations where the tempera-

ture might increase quickly, e.g. near the  re or on

the direct sunshine.

• Do not expose batteries to excessive radiant heat,

do not throw them into the  re, do not disassemble

them and do not try to recharge un-rechargeable

batteries. They could leak or explode.

» Never use di erent batteries together or mix

new and old ones.

» Dispose of batteries in an environmentally friendly way.

» Most of the EU countries regulate the disposal of batteries by law.

Disposal

• Do not dispose of this TV as unsorted municipal waste.

Return it to adesignated collection point for the recycling

of WEEE. By doing so, you will help to conserve resources

and protect the environment. Contact your retailer or local

authorities for more information.

CE Statement:

• Hereby, Universal Media Corporation s.r.o. declares that this LED TV

is in compliance with the essential requirements and other relevant

provisions of R&TTE Directive 1999/5/EC. http://www.sharp.eu/av/

documents-of-conformity

Trademarks

• The terms HDMI and HDMI High-De nition Multimedia Interface,

and the HDMI Logo are trademarks or registered trademarks of HDMI

Licensing, LLC in the United States and other countries.

• The “HD TV” Logo is atrademark of DIGITALEUROPE.

• The “HD TV 1080p” Logo is atrademark of DIGITALEUROPE.

• The DVB logo is the registered trademark of the Digital Video Broad-

casting - DVB - project.

• Manufactured under license from Dolby Laboratories. Dolby, Dolby

Audio and the double-D symbol are trademarks of Dolby Laboratories.

• For DTS patents, see http://patents.dts.com. Manufactured under

license from DTS Licensing Limited. DTS, the Symbol, & DTS and the

Symbol together are registered trademarks, DTS TruSurround and

DTS 2.0+Digital Out are trademarks of DTS, Inc. © DTS, Inc. All Rights

Reserved.

• YouTube and the YouTube logo are trademarks of Google Inc

• The Wi-Fi CERTIFIED Logo is a certi cation mark of the Wi-Fi Alliance.

• Wi-Fi CERTIFIED Miracast and Miracast are trademarks of Wi-Fi Alliance

• DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks, service

marks, or certi cation marks of the Digital Living Network Alliance.

• MHL and the MHL logo are a trademark, registered trademark or

service mark of MHL, LLC in the United States and /or other countries.

• The Bluetooth word mark and logos are registered trademarks owned

by Bluetooth SIG,. Inc.

What is included in the box

Supply of this TV includes following parts:

• 1x TV • 1x RF cable

• 1x Remote control • 1x TV stand installation packet

& screw set for wallmount

• 2x AAA batteries • 1x User guide

• 1x Mini Component adapter

cable

• 1x Mini Composite adapter

cable

• 1x Mini SCART adapter cable

Wall mounting the TV

If you wish to mount this television on a wall, follow the instructions

shown on page xx.

Attaching the Stand

Please follow the instructions on last page of this user manual.

Getting started - initial set up

1. Insert the batteries supplied into the Remote control.

2. Using the RF cable supplied, connect the TV to the TV Aerial wall

socket.

3. For connecting to the Internet with a wired connection connect a

Cat 5/Ethernet cable (not included) from the TV to your broadband

modem/router. If you wish to connect to internet via Wi-Fi, please

follow instruction in electronic INSTALLATION GUIDE (point 7, STEP2

bellow).

4. Connect the power cable to the Electrical outlet. You will be now

welcomed with the First Time Installation screen.

5. If it does not appear, press and hold TV control stick on TV back cover until

special menu appears. Choose option Pair Again. Please press and hold

the blue and yellow buttons for a few seconds on the remote control,

until white LED on TV front blinked  ve times. Press [MENU] then 8-8-

8-8 and the First Time Installation screen will appear.

6. If you wish to make changes to any of the default settings, use the

scroll ▲/▼/◄/► buttons. To exit this menu at anytime, press [EXIT]

button.

7. Please set desired settings in INSTALLATION GUIDE.

STEP 1 - Set the TV Menu language.

STEP 2 - Set type of network connection. If you wish to skip this step

and connect TV to network later, please choose Skip Network Setting

STEP 3 - Select the location of TV. For home use, please select Home.

For shop demonstration mode, set Store.

STEP 4 - Choose Digital TV tuning options:

DVB Antenna - You can choose between Terrestrial (DVB-T), Cable

(DVB-C) or Satellite (DVB-S).

Tunning Mode - Choose if you want to tune only Digital (DTV)

Analogue (ATV) or both Digital and Analogue (DTV + ATV)

Country - Set the desired country.

Operator - Select Cable provider. If your cable operator is not listed

select Others. (Avaliable only if DVB Antenna is set to CABLE)

8. Choose [Auto Start] item and press [OK] button to start the tuning

process.

9. Optional channel presets DVB-C:

Keep all default settings as recommended.

If DVB-C channels are not found, contact your network provider for the

valid "Network ID". Then perform anew search. Press the [MENU], select

"Network ID" and enter the network ID.

Choose [Auto Tuning] item and press [OK] button to start the

tuning process.

10. Optional channel presets DVB-S2: Select "Satellite" in the "DVB

Antenna" in the menu for the optional channel presets. Here you can

choose between the various satellites. Since selection completed, then

the channel list of the exact satellite will be available to be imported

into your TV system.

Con rm with [OK] button on the remote control, to start scanning.

TIP: If you are missing channels, the reason for this is likely to be signal

strength, you should consider connecting signal booster and re-tuning the TV.

Remote control

Radio controlled remote control - No more aiming in the TV direction!

Refer to remote control picture on the second page of this user

manual.

1. STANDBY – Switch on TV when in standby or vice versa.

2. NET+ – Displays AQUOS NET+ menu.

3. MUTE – Mute the sound or vice versa.

4. 0 – 9 – to select aTV channel directly.

5. YouTube – Displays YouTube application.

6. SMART – Displays SMART MEDIA menu.

7. SOURCE – To display the input/source menu.

8. TV GUIDE – Opens the 7 Day TV Guide (Digital mode).

9. – To return to the previous channel viewed.

10. DTV – Switch to digital TV source.

11. VOL ▲/▼ – To increase / decrease the sound level.

12. FAV – To display favourites menu.

13. INFO – Press once for now/next channel information. Press twice for

programme information about current programme.

14. CH ▲/▼ – To increase or decrease the channel being watched.

15. SUBTITLE – To switch the dialogue at the bottom of the screen (on/

o ).

16. TELETEXT – Teletext mode - To enter Teletext

17. MENU – To display OSD menu.

18. BACK – Back to previous menu.

19. EXIT – To exit all menus.

20. (▲/▼/◄/►/ OK) – Allows you to navigate the on-screen menus and

adjust the system settings to your preference. Press▲ to change

picture mode during watching TV. ▼ change sound mode Press to

during watching TV.

21. – To play in fast rewind mode.

22. – To play in fast forward mode.

23. – To play/pause

24. Rec1 – PVR Record

25. – To restart the current chapter

26. – To advance forward to the next chapter

27. – To stop the playback

28. Rec List1– Opens the list of recordings.

29. COLOUR BUTTONS – Additional teletext and OSD functions

1 - available only with PVR function

TV Control Stick

TV control stick is located on the lower left corner of back side of the TV.

You can use it instead of remote control to control most of the functions

of your TV.

While TV is in standby mode:

• short press of control stick - Power On

71.

While watching TV:

• RIGHT/LEFT – volume up/volume down

• UP/DOWN – changes channel up/down

• short press – Displays Menu

• long press – Standby Power O

While in menu:

• RIGHT/LEFT/UP/DOWN – navigation of cursor in on-screen menus

• short press – OK/Con rm selected item

• long press – Back to previous menu

Choosing Mode Input/Source

To switch between the di erent input/connections.

a) Using the buttons on the remote control:

1. Press [SOURCE/ AV] - The source menu will appear.

2. Press [▼ ▲] or [ ] to select the input you require.

3. Press [OK].

b) Using the TV control stick:

1. Shortly press control stick to enter menu.

2. Press control stick down and navigate cursor to SOURCES menu.

3. Shortly press control stick to enter SOURCES menu.

4. with control stick choose the input/source yourequire.

5. By short press of control stick, you will change input/source to the

one selected.

Connections

Please see the table for connector types for

di erent models available on the page 12.

USB

USB 2.0 input 1, 2; USB 3.0 input 3

HDMI 1, 2, 3(ARC), 4(MHL) in

HDMI2.0-Input 1, 2, 3, 4

SD Card reader

SD Card Input

Mini AV

Video Input & Component / Video audio input

Mini YPbPr

Mini Component HD Input

Mini SCART

Mini SCART-Input

CI Card IN

CI input

RF In

RF / TV Aerial Input

Sat In

Satellite Input

Digital Optical Audio Out

Digital optical output

RJ 45

Ethernet

HEADPHONES

3.5mm Headphone output

D-link

service input only

TV Menu navigation

To access this menu, press [MENU] button on the remote control. To enter

amenu press [OK]. If you wish to make changes to any of the default

settings, use the scroll (▲/▼/◄/►) buttons. To con rm any settings press

[OK] button. To exit this menu at anytime, press [EXIT] button.

AQUOS NET+

Home - shortcut to Home page

Browser - shortcut to default web browser

Movies - shortcut to movies

TV Shows - shortcut to TV Shows

Music - shortcut to music

Watchlist - shortcut to watch list

Applications

App portal - shortcut to Smart AQUOS NET+ application portal

Preinstalled Applications - preinstalled popular applications, like

YouTube, Facebook, Twitter etc., immediately at your disposal.

Smart Media

USB/SD Card Media - Multimedia mode o ers the playback of various

content saved on a USB Memory Stick / SD Card. The content will be

divided into various  le types: Photo, Music and Movie. The ‘File Option’ will

show and allow you to play all types of supported content.

1. You can navigate through the menu using the scroll ▲/▼/◄/►

buttons. To con rm the item you wish to play/view press [OK] button.

2. Select the drive you require. (If your drive only has 1 partition you will

only see 1 item).

3. You can now access the item. Press OK to view.

4. While viewing content you can control the playback modes using the

remote control buttons or by bringing up the playback navigation

menu and selecting on-screen buttons and [OK] ▲/▼/◄/►

NOTE: USB extension cables are not recommended as

they can cause a reduction in picture/audio quality and

stoppages during play back of USB content.

Media Server - Automatically searches for digital media servers (DMS)

connected to your home network and enables the playback and rendering

of content from media servers

NOTE: ‘Media Server’ is not provided by the TV manufacturer, you can

download third party software and install it on your computer or NAS.

Wireless Connection* - Allows you to view content from your smart

phone or tablet on the TV screen. Wireless connection is formed using Wi-Fi

Direct, so access to a Wi-Fi network is not needed. You can share content

from your smartphone or tablet based on Android 4.4 and newer system.

WiDi (Wireless Display)* - lets you easily stream movies, videos,

photos and music directly to your TV screen. You’ll need a

laptop, smartphone, or tablet with Intel® WiDi technology.

* - This function is only available on selected smartphones and note-

books.

Sources

From this menu, you can switch your TV input signal to di erent source/

connected device.

68.

SHARP

LC-43XUF8772ES LC-49XUF8772ES LC-55XUF8772ES LC-65XUF8772ES

A A A A+

43" / 109cm 49" / 123cm 55" / 139cm 65" / 164cm

69,0 W 89,0 W 102,0 W 118,0 W

101 kWh 130 kWh 149 kWh 172 kWh

<0,50 W <0,50 W <0,50 W <0,50 W

3840 (H) × 2160 (V) 3840 (H) × 2160 (V) 3840 (H) × 2160 (V) 3840 (H) × 2160 (V)

Product  che

Trademark

Model

Energy e ciency class

Visible screen size (diagonal)

On-mode power consumption

Annual energy consumption *

Standby power consumption **

O mode power consumption

Screen resolution

* - Energy consumption XYZ kWh per year, based on the power consumption of the television operating 4 hours per day for 365 days. The actual

energy consumption will depend on how the television is used.

** - when the TV is turned o with the remote control and no function is active

N/A

Was be ndet sich im Karton

Der Lieferumfang dieses Fernsehgerät umfasst

folgende Teile:

• 1x Fernsehgerät • 1x RF Kabel

• 1x Fernbedienung • 1x TV Fuß Installationspaket und

• Schraubenst für Wandhalterung

• 2x AAA Batterien • 1x Benutzerhandbuch

• 1x Mini Komposit

Adapterkabel

• 1x Mini Komponenten Adapterkabel

• 1x Mini SCART

Adapterkabel

Wandbefestigung des TV

Wenn Sie den Fernsehen an der Wand befestigen wollen, so befolgen

Sie bitte die Hinweise auf Seite xx.

Montage des Ständers

Bitte befolgen Sie hierzu die Anleitungen auf der letzten Seite dieses

Benutzerhandbuchs.

Erste Schritte - Ersteinrichtung

1. Legen Sie die mitgelieferten Batterien in die Fernbedienung ein.

2. Nehmen Sie das mitgelieferte RF-Kabel, verbinden Sie das

Fernsehgerät damit mit der Antennenwanddose.

3. Zum Anschluss Ihres Fernsehgeräts über Ihr/en Breitband Router

oder Modem an das Internet mit einem Netzwerkkabel verwenden

Sie bitte ein Cat5-Ethernetkabel. Wenn Sie sich mit dem Internet über

Wi-Fi verbinden möchten, so folgen Sie bitte den Anweisungen im

elektronischen INSTALLATION GUIDE (Punkt 7, Schritt 2 unten).

4. Verbinden Sie das Stromkabel mit der elektrischen Steckdose. Jetzt

erscheint der Erstinstallations-Bildschirm.

5. Wenn dies nicht erscheint, so drücken und halten Sie den Steuerknopf an

der Rückseite des TV, bis das spezielle Menü angezeigt wird. Wählen Sie

die Option „erneut paaren“. Bitte drücken und halten Sie den blauen

und den gelben Knopf auf der Fernbedienung für wenige Sekunden,

bis die weiße LED an der TV-Vorderseite fünfmal aufblinkt. Drücken

Sie [MENU], dann 8-8-8-8, und der Bildschirm zur Erstinstallation wird

erscheinen.

6. Verwenden Sie bitte die ▲/▼/◄/► Richtungstasten, wenn Sie

Standardeinstellungen verändern möchten. Drücken Sie auf den

[EXIT] Knopf um das Menü zu verlassen.

7. Wählen Sie die gewünschten Einstellungen in der

Installationsanleitung.

Schritt 1 - Wählen der TV Menüsprache.

Schritt 2 - Wählen der Netzwerkverbindung. Wenn Sie diesen Schritt

überspringen und Ihre Verbindung später wählen wollen, so wählen

Sie bitte Netzwerkeinstellung überspringen.

Schritt 3 - Wählen Sie den Standort des Fernsehers. Für den

Heimgebrauch wählen Sie bitte Home. Für den Vorführmodus im

Laden wählen Sie bitte Store.

Schritt 4 - Wählen Sie die TV Senderwahl:

DVB Antenne - Sie können zwischen Antenne (DVB-T),

Kabel (DVB-C) oder Satellit (DVB-S)* auswählen.

Sendersuche - Wählen Sie aus, ob Sie nur digitalen (DTV), analogen

(ATV) oder beides (DTV + ATV) Empfang haben möchten

Land - Zur Einstellung des gewünschten Landes.

Anbieter - Auswahl des Kabelanbieters. Wenn Ihr Kabelanbieter

nicht aufgeführt ist, wählen Sie bitte 'Anderer' (Nur

verfügbar, wenn DVB Antenne auf KABEL gesetzt ist)

Umgebung - Auswahl des Gerätestandorts

Wählen Sie bitte den Ecohome, wenn Sie das Gerät Zuhause verwenden.

Für den Ladenvorführmodus müssen den Ladenmodus einstellen.

8. Wählen Sie [Auto Start] und drücken Sie den [OK] Knopf, um die

Sendereinstellung zu starten.

9. Optionale Kanalvoreinstellungen DVB-C:

Belassen Sie alle empfohlenen Einstellungen.

Wenn DVB-C Kanäle nicht gefunden werden, setzen Sie sich mit Ihrem

Kabelanbieter in Verbindung und fragen nach der gültigen „Netzwerk ID“.

Dann führen Sie eine neue Suche durch. Drücken Sie auf [MENÜ], wählen

„Netzwerk ID“ aus und geben die „Netzwerk ID“ ein.

Wählen Sie [Auto Tuning] und drücken Sie den [OK] Knopf, um den

automatischen Sendersuchlauf zu starten.

10. Optionale Kanalvoreinstellungen DVB-S2:

Wählen Sie im Menü für die optionalen Kanalvoreinstellungen unter

„Digitaltyp“ den Punkt „Satellit“ aus. Hier können Sie unter mehreren

Satelliten wählen. Wenn Sie die Auswahl getro en haben, dann

wird die Kanalliste des ausgewählten Satelliten in Ihr Fernsehgerät

importiert.

Bestätigen Sie mit dem [OK] Knopf auf der Fernbedienung, um

den Scan einzuleiten.

TIPP: Wenn Kanäle fehlen, liegt dies wahrscheinlich an der

Signalstärke. Sie sollten in Erwägung ziehen, einen Signalverstärker

anzuschließen und das Fernsehgerät neu einzustellen.

Fernbedienung

Funkgesteuerte Fernbedienung - Nie mehr in Richtung des Fernsehers

zielen! Siehe Abbildung der Fernbedienung auf der zweiten Seite

dieses Handbuchs.

1. STANDBY – Schaltet das Gerät aus Standby an, oder umgekehrt.

2. NET+ – Zeigt das AQUOS NET+ Menü an.

3. MUTE – Schaltet den Ton stumm oder umgekehrt.

4. 0 – 9 – Zur Direktauswahl eines Kanals.

5. YouTube – Zum Aufruf von YouTube.

6. SMART – Zeigt Ihnen das SMART MEDIA Menü.

7. SOURCE – Zur Anzeige des Eingans-/Quellenmenüs.

8. TV GUIDE – Ö net die 7-Tage Fernsehzeitschrift (Digitalmodus).

9. – Um zum vorher angesehen Kanal zurück zu schalten.

10. DTV – Schaltet zur digitalen TV-Quelle um.

11. VOL /▲ ▼ – Zur Lautstärkeeinstellung.

12. FAV – Zur Anzeige des Favoritenmenüs.

13. INFO – Für aktuelle/nächste Kanalinformationen: Ein Mal drücken.

Drücken Sie zwei Mal für die Programminformation über laufende

Sendungen.

14. CH ▲ ▼/ – Zur Kanalauswahl.

15. SUBTITLE – Um Untertitel am unteren Bildschirmrand ein- oder

auszuschalten.

16. TELETEXT – Teletext Modus - Um Teletext aufzurufen.

17. MENU – Zum Aufruf des OSD-Menü.

18. BACK – Zurück zum vorherigen Menü.

19. EXIT – Um alle Menüs zu verlassen.

20. (▲▼◄►//// OK) – Ermöglicht Ihnen, durch die On-Screen Menüs

zu navigieren und die Systemeinstellungen nach Ihren Wünschen zu

verändern. Drücken Sie ▲, um den Bildmodus während des Be-

triebes des TV zu wechseln. Drücken Sie ▼, um den Tonmodus

während des Betriebes des TV zu wechseln.

21. –Schneller Rücklauf.

22. – Schneller Vorlauf.

71.

SHARP

LC-43XUF8772ES LC-49XUF8772ES LC-55XUF8772ES LC-65XUF8772ES

A A A A+

43" / 109cm 49" / 123cm 55" / 139cm 65" / 164cm

69,0 W 89,0 W 102,0 W 118,0 W

101 kWh 130 kWh 149 kWh 172 kWh

<0,50 W <0,50 W <0,50 W <0,50 W

3840 (H) × 2160 (V) 3840 (H) × 2160 (V) 3840 (H) × 2160 (V) 3840 (H) × 2160 (V)

Typenschild

Markenzeichen:

Modell:

Energiee zienzklasse:

Sichtbare Bildschirmgröße (diagonal):

Stromverbrauch im eingeschalteten Zustand:

Jährlicher Stromverbrauch*:

Standby Stromverbrauch**:

Stromverbrauch ausgeschaltet:

Bildschirmau ösung:

*- Stromverbrauch von XYZ kWh je Jahr auf der Grundlage des Stromverbrauchs eines Fernsehgeräts, dass an 365 Tagen für 4 Stunden am Tag einge-

chaltet ist. Der tatsächliche Stromverbrauch hängt davon ab, wie das Fernsehgerät verwendet wird.

** - wenn das Gerät mit der Fernbedienung ausgeschaltet wurde und keine Funktion aktiv ist

N/A

Product specificaties

Merk:	Sharp
Categorie:	Televisie
Model:	LC-65XUF8772ES
Kleur van het product:	Grijs
LED-indicatoren:	Ja
Bluetooth:	Ja
Beeldschermdiagonaal:	65 "
Resolutie:	3840 x 2160 Pixels
Oorspronkelijke beeldverhouding:	16:9
Ondersteund audioformaat:	MP3, WMA
Ethernet LAN:	Ja
Videocompressieformaten:	HEVC, MKV, MPEG4
Geïntegreerde geheugenkaartlezer:	Ja
Compatibele geheugenkaarten:	SD
Beeldscherm vorm:	Flat
Helderheid:	350 cd/m²
Aantal USB 2.0-poorten:	3
Aantal HDMI-poorten:	4
DVI-poort:	Nee
Aantal Ethernet LAN (RJ-45)-poorten:	1
Smart TV:	Ja
Ingebouwde luidsprekers:	Ja
Gemiddeld vermogen:	35 W
Stroomverbruik (in standby):	- W
Aantal luidsprekers:	3
Hoofdtelefoonuitgangen:	1
HD type:	4K Ultra HD
3D:	Nee
Ondersteund beeldformaat:	JPEG XR
HDMI versie:	2.0
Display technologie:	LED
Responstijd:	- ms
Contrast ratio (dynamisch):	1000000:1
Diepte ( zonder voet ):	61 mm
Hoogte (zonder voet ):	847 mm
Breedte ( zonder voet ):	1451 mm
Gewicht (zonder voet):	25200 g
PC-ingang (D-Sub):	Nee
Soort tuner:	Analoog & digitaal
Formaat digitaal signaal:	DVB-C, DVB-S, DVB-S2, DVB-T, DVB-T2
Timeshift:	Ja
Ingebouwde audio decoders:	DTS
Breedte apparaat (met standaard):	1451 mm
Diepte apparaat (met standaard):	263 mm
Hoogte apparaat (met standaard):	884 mm
Digital Living Network Alliance (DLNA) gecertifieerd:	Ja
Ingebouwde subwoofer:	Ja
Teletext:	Ja
Technologie voor decoderen van geluid:	Dolby Digital DTS
Mobile High-Definition Link ( MHL ):	Ja
Aantal SCART-poorten:	1
Wifi:	Ja
Slaaptimer:	Ja