Sharp 32CF5E Handleiding

Sharp Televisie 32CF5E

Lees hieronder de 📖 handleiding in het Nederlandse voor Sharp 32CF5E (93 pagina's) in de categorie Televisie. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/93
Quick start guide
PL LVSVNO DK SU LT
ET HRSKCZ HU RO BG
SR ELSL
EN NLFRDE IT ES PT
SHA/QSG/0120
1
EN
Important safety instructions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Please, read these safety instructions and respect
the following warnings before the appliance is
operated:
In order to prevent  re always
keep candles and other open
ames away from this product.
Television sets with 43”size screens or more must be lifted and carried by
at least two people.
This TV does not contain any parts which could be repaired by the user.
In case of afault, contact the manufacturer or the authorised service
agent. Contact with certain parts inside the TV might endanger your life.
The guarantee does not extend to faults caused by repairs carried out by
unauthorized third parties.
Do not remove the rear part of the appliance.
This appliance is designed for the receiving and reproduction of video
and sound signals. Any other use is strictly forbidden.
Do not expose the TV to dripping or splashing liquid.
To disconnect the TV from mains please unplug the mains plug from the
mains socket.
If the supply cord is damaged, it must be replaced by the manufacturer,
aservice agent or similarly quali ed persons in order to avoid ahazard.
The suggested distance to watch HD TV is approximately three times
longer than the screen diagonal size. Re ections on the screen from
other light sources can make the quality of the picture worse.
Ensure the TV has suffi cient ventilation and is not close to other appli-
ances and other pieces of furniture.
Install the product at least 5 cm from the wall for ventilation.
Ensure that the ventilation openings are clear of items such as newspa-
pers, table-cloths, curtains, etc.
The TV set is designed to be used in amoderate climate.
The TV set is designed exclusively for operation in adry place. When
using the TV outside, please, make sure it is protected against moisture
(rain, splashing water). Never expose to moisture.
Do not place any objects, containers  lled with liquids, such as vases,
etc. on the TV. These containers might get pushed over, which would
endanger electric safety. Place the TV exclusively on  at and stable
surfaces. Do not place any objects such as newspaper or blankets, etc.
on or under the TV.
Make sure the appliance does not stand on any power cables as they
might get damaged. Mobile phones and other devices such as WLAN
adapters, monitoring cameras with wireless signal transmission, etc.
might cause electromagnetic interference and they should not be
placed near the appliance.
Do not place the appliance near heating elements or in aplace with
direct sunlight as it has anegative eff ect on cooling of the appliance.
Heat storage is dangerous and it can seriously reduce the lifetime of the
appliance. In order to ensure the safety, ask aquali ed person to remove
the dirt from the appliance.
Try to prevent damage to the mains cable or mains adapter. The appli-
ance can only be connected with the supplied mains cable/ adapter.
Storms are dangerous for all electric appliances. If the mains or aerial
wiring is struck by lightening the appliance might get damaged, even if
it is turned off . You should disconnect all the cables and connectors of
the appliance before astorm.
To clean the screen of the appliance use only adamp and soft cloth. Use
only clean water, never detergents and in no case use solvents.
Position the TV close to the wall to avoid the possibility of it falling when
pushed.
WARNING - Never place a television set in an unstable location. A televi-
sion set may fall, causing serious personal injury or death. Many injuries,
particularly to children, can be avoided by taking simple precautions
such as:
Use cabinets or stands recommended by the manufacturer of the
television set.
Only use furniture that can safely support the television set.
Ensure the television set is not overhanging the edge of the supporting
furniture.
Not place the television set on tall furniture (for example, cupboards or
bookcases) without anchoring both the furniture and the television set
to a suitable support.
Not place the television set on cloth or other materials that may be
located between the television set and supporting furniture.
Educate children about the dangers of climbing on furniture to reach the
television set or its controls.
Ensure that children do not climb or hang onto the TV.
If your existing television set is being retained and relocated, the same
considerations as above should be applied.
The instructions shown below are asafer way to set up the TV, by fixing it
to the wall and will avoid the possibility of it falling forwards and causing
injury and damage.
For this type of installation you will need afastening cord
A) Using one/both of the top wall-mounting holes and screws (the
screws are already supplied in the wall mounting holes) fasten one end
of the fastening chord/sto the TV.
B) Secure the other end of the fastening chord/sto your wall.
The software on your TV and the OSD layout can be changed without
notice.
Note: In case of electrostatic discharge (ESD) the apparatus may show
incorrect function. In such case, switch the TV off and back on. The TV
will work normally.
Warning:
Do not use TV set directly after unpacking. Wait until TV warms up to the
room temperature before using it.
Never connect any external devices to alive appliance. Switch off not
only the TV but also the devices which are being connected! Plug the
TV plug into the wall socket after connecting any external devices and
the aerial!
Always make sure there is free access to the TV mains plug.
The appliance is not designed for ause in aworkplace  tted with
monitors.
The systematic use of headphones at high volume might lead to irrevers-
ible hearing damage.
Ensure environmental disposal of this appliance and any components
including batteries. When in doubt, please, contact your local authority
for details of recycling.
While installing the appliance, do not forget that furniture surfaces are
treated with various varnishes, plastics, etc. or they might be polished.
The chemicals contained in these products might have areaction with
the TV stand. This could result in bits of the material sticking to the furni-
ture surface, which are diffi cult to remove, if not impossible.
The screen of your TV has been produced under top quality conditions
and was checked in detail for faulty pixels several times. Due to the tech-
nological properties of the manufacturing process, it is not possible to
eliminate the existence of asmall number of faulty points on the screen
(even with maximum care while in production). These faulty pixels are
not considered faults in terms of guarantee conditions, if their extent is
not greater than the boundaries de ned by DIN norm.
The manufacturer cannot be held responsible, or be liable, for customer
service-related issues related to the third party content or services. Any
questions, comments or service-related inquiries relating to the third
party content or service should be made directly to the applicable
content or service provider.
There are a variety of reasons you may be unable to access content or
services from the device unrelated to the device itself, including, but not
3
EN
What is included in the box
Supply of this TV includes following parts:
1x TV 1x TV stand installation packet
1x Remote control 1x Quick Start Quide
2x AAA batteries
Attaching the Stand
Please follow the instructions in Technical lea et, located in the
accessories bag.
Wall mounting the TV
1. Remove the four screws that are supplied in the wall mounting
holes.
2. The wall mount can now be easily attached to the mounting holes
on the rear of the TV.
3. Install the wall mounting bracket to the television as advised by
the bracket manufacturer.
Connections
Connecting external devices see last page in this IM.
Getting started - initial set up
1. Using the RF cable, connect the TV to the TV Aerial wall socket.
2. Insert the batteries supplied into the Remote control.
3. Connect the power cable to the Electrical outlet.
4. Then press Standby button to power on TV.
5. After turning the TV on, you will be welcomed by the First Time
Installation menu.
If it does not appear, on the remote control, please press [MENU] then
8-8-8-8 and the menu will appear.
If you wish to make changes to any of the default settings, use the
scroll ▲/▼/◄/► buttons. To exit this menu at anytime, press [EXIT]
button.
6. Please set desired settings in FIRST TIME INSTALLATION screen.
TV buttons*
Vol+ Volume up and menu right
Vol- Volume down and menu left
CH+ Programme/Channel up and menu up
CH- Programme/Channel down and menu down
MENU Displays Menu/OSD
SOURCE Displays the input source menu
STANDBY Standby Power On/Off
* - for TV with buttons
TV Control Stick*
TV control stick is located on the lower left corner of back side of the TV.
You can use it instead of remote control to control most of the functions
of your TV.
While TV is in standby mode:
short press of control stick - Power On
While watching TV:
RIGHT/LEFT – volume up/volume down
UP/DOWN – changes channel up/down
long press UP (or DOWN) – Displays Sources/Inputs menu
short press – Displays Menu
long press – Standby Power Off
While in menu:
RIGHT/LEFT/UP/DOWN – navigation of cursor in on-screen menus
short press – OK/Con rm selected item
long press – Back to previous menu
* - for TV with control stick
Choosing Mode Input/Source
To switch between the diff erent input/connections.
a) Using the buttons on the remote control:
1. Press [SOURCE/ ] - The source menu will appear.
2. Press [] or [] to select the input you require.
3. Press [OK].
b1) Using the buttons* on the Television:
1. Press [SOURCE].
2. Scroll up/down using CH+/CH- buttons to the input/source you
require.
3. Press [VOL+] to change input/source to the one selected.
b2) Using the TV control stick*:
1. Press control stick UP (or DOWN) for few seconds to enter SOURCES
menu.
2. With control stick choose the input/source you require.
3. By short press of control stick to center, you will change input/source
to the one selected.
* - optional
TV Menu navigation
To access this menu, press [MENU] button on the remote control. To enter
amenu press [OK]. If you wish to make changes to any of the default
settings, use the scroll (▲/▼/◄/►) buttons. To con rm any settings press
[OK] button. To exit this menu at anytime, press [EXIT] button.
Electronic instruction manual
To view the electronic instruction manual press the yellow [help]
button.
For some standard options (picture/channel/sound etc) quick
instructions are available by pressing the menu button, navigate to
desired option and then press yellow [help] button.
Remote control
See in On Screen Manual in TV


Product specificaties

Merk: Sharp
Categorie: Televisie
Model: 32CF5E

Heb je hulp nodig?

Als je hulp nodig hebt met Sharp 32CF5E stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Televisie Sharp

Handleiding Televisie

Nieuwste handleidingen voor Televisie