Sekonic LiteMaster Pro L-478D Handleiding
Sekonic
Lichtmeter
LiteMaster Pro L-478D
Lees hieronder de 📖 handleiding in het Nederlandse voor Sekonic LiteMaster Pro L-478D (2 pagina's) in de categorie Lichtmeter. Deze handleiding was nuttig voor 116 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/2
Thank you for purchasing the LITEMASTER PRO L-478D/DR.
This Startup Guide introduces the basic operating functions of this light
meter. For specic details on this light meter, please see the Operating
Manual on the CD-ROM (accompanying accessory).
1 Check Included Items
The following items are included with the LIGHTMASTER PRO
L-478D/DR. Please be sure that everything is included. If any item
is missing, please contact the reseller that sold the meter or the
distributor.
*If something is missing, please contact the store of purchase.
Start-up Guide
(this document)
Main body CD-ROM
(Operating Manual and
Data Transfer Software)
Strap
Soft case
Anti-glare sheet for
LCD Screen
2
L-478D/DR Component Names
The following are the names of the buttons and parts on the L-478D/
DR (referred to as the main unit from here on).
Bottom view
Strap eyelet
Synchro terminal
Battery cover open
Battery
compartment
Front view Rear view
L-478D
J 1R10-00000
MODEL
SEKONIC CORPORATION
MADE IN PHILIPPINES
Lock lever
Touch
panel
Memory
button*
USB
port
Menu
button
Lumisphere
retracting ring
Lumisphere
Measuring
button*
Battery
cover latch
Power
button
Battery cover
* When using the Spot Meter attachment (separate accessory), you
may nd operation more comfortable by switching the Memory and
Measuring button functions. For details to do this, please see the
Custom Settings function section in the Operating Manual on the
included CD-ROM.
3 Turning the Power ON
After inserting the batteries according to the “+” and “-” symbol in
the battery compartment, press and hold the Power Button for about
1 second to start up meter.
* The startup screen will be displayed, followed by the measuring
screen.
* Press and hold the Power Button for about 1 second to turn the
meter off.
Title screens
Or
Measuring screen
Power Button
* When rst starting or after replacing batteries, a white screen with the
SEKONIC logo in blue will be displayed as the meter starts up.
4 Screen Operations
This section explains how the touch panel on the main unit is
operated.
Measuring screen Sliding:
Slide a nger up or down on the
setting value areas to change setting
values.
Touch Operations:
◆Setting value increases when the up arrow ( ) is touched.▲
◆Setting value decreases when the down arrow ( ) is touched.▼
◆Touch icon/buttons at the bottom of the screen to activate their
function.
5
Measuring Preparations
(Selecting Measuring Mode)
This example explains how to measure light using the ambient light
T value (shutter speed) priority mode.
1) Touch the Measuring Mode Selection button top left of the Measuring
screen enter the Measuring Mode Selection Screen,
2) Touch the ambient T icon/button to select the ambient light T (shutter
speed) priority mode button and return to the measuring screen.
* The above screen example shows all of the measuring mode icon/
buttons visible.
3) Set the ISO sensitivity and shutter speed corresponding to the camera
settings for shooting.
Shutter speed ISO sensitivity
6
Measuring Preparations (Setting Lumisphere)
The Lumisphere can be either extended or retracted to obtain the
best light measurements for different types of subjects.
Selecting Lumisphere setting
• Rotate the Lumisphere retracing ring to the right to retract the Lumisphere.
Rotate it to the left to extend the Lumisphere. Be sure to turn the
Lumisphere retracting ring to set the aligning mark with the corresponding
symbol (extended/retracted) until it clicks into place.
Extended Lumisphere Retracted Lumisphere
(Lumidisc)
Extended lumisphere is used to
measure illumination of people,
buildings, and other three
dimensional objects.
Retracted Lumisphere is used
to measure illumination of at
subjects such as manuscripts,
paintings, difference of one or
more light sources for ratio lighting
and illumination in Lux or Foot-
candle.
Extended ( ) Retracted ( )
Extended
Lumisphere
Lumisphere
Aligning mark
Retracted
Lumisphere
7 Measuring Light
This example explains how to measure light using the extended
Lumisphere ( ).
Position the meter in front of the subject with the extended Lumisphere
facing towards the camera’s lens axis press the measuring button to measure
the light falling on the subject.
Startup Guide
LITEMASTER PRO
L-478D/DR
8 Checking Measured Value
This example explains how to observe exposure value using the
ambient light T value (shutter speed) priority mode.
F stop value (aperture) is displayed for ambient light and T
(shutter speed) priority mode.
Measuring
button
Measuring
Value
9_1 Measuring Modes (ambient light)
The following describes the other Ambient Light measuring modes
available to meet your shooting needs.
* The mode details appearing in bold font below are the modes
available in the default display mode. Measuring Modes can be
added or removed in the Custom Setting Mode.
Icon Mode Details
Ambient light T (shutter speed) priority mode
Displays f-stop values (apertures numbers) for input shutter
speed and ISO values.
Ambient light F stop(aperture) priority mode
Displays shutter speed values for input shutter speed and
ISO values.
Ambient light TF (Shutter speed and F stop) priority mode.
Displays ISO value for input shutter speed and F-stop.
Ambient light HD Cine mode
Displays F-stop value for input shutter speed, frame rate and ISO
values.
Ambient light Cine mode
Displays F-stop value for input frame rate (f/s), ISO, and shutter
angle values.
Ambient light Illuminance (lux) mode
Displays brightness values in lux units.
Ambient light Illuminance (fc) mode
Displays brightness values in foot-candle units.
Ambient light Luminance (cd/m2) mode (by reected light
measurement using with accessory viewnder available as
separate purchase)
Displays brightness values in cd/m2 units.
Ambient light Luminance () independent display mode (by
reected light measurement using with accessory viewnder
available as separate purchase)
Displays brightness values in foot-lambert units.
Icon Mode Details
Cordless mode
Detects flash brightness without meter-flash connection
after measuring button pressed to arm meter for 90 seconds
and flash fired separately.
Displays f-stop values (apertures numbers) for input shutter
speed and ISO values.
Cordless multi (cumulative) ash mode
Detects and accumulates ash brightness without meter-ash
connection after measuring button pressed to arm meter for 90
seconds and ash red separately.
Displays f-stop values (apertures numbers) for input shutter
speed and ISO values.
Cord (PC) mode
Detects flash brightness with PC cord meter-flash
connection.
Displays f-stop values (apertures numbers) for input shutter
speed and ISO values.
Cord multi (cumulative) ash mode
Detects and accumulates ash brightness with PC cord meter-
ash connection.
Displays f-stop values (apertures numbers) for input shutter
speed and ISO values.
Radio triggering mode *
Detects ash brightness without meter-ash connection after
radio transmitted trigger signal is received by radio-receiver
connected ash.
Displays f-stop values (apertures numbers) for input shutter
speed and ISO values.
Radio triggering multi (cumulative) ash mode *
Detects and accumulates ash brightness without meter-ash
connection after radio transmitted trigger signal is received by
radio-receiver connected ash.
Displays f-stop values (apertures numbers) for input shutter
speed and ISO values.
* L-478DR only. PocketWizard® receivers are required to radio signal and
trigger ash.
9_2 Measuring Modes (ashlight)
Radio Control Function (for L-478DR only)
10_1
Setting Channels in Radio Triggering Mode
Using the Radio triggering mode with operations for using
PocketWizard® ControlTL®.
Setting ControlTL® Channel
1) Touch the Tool Box icon at the bottom of
the Measuring screen to display the Tool Box
screen.
2) Touch the Radio CH/Zone button to display
the Radio Trigger Channel / Zone setting
screen. Then touch the CTL tab activate the
ControlTL settings.
3) Touch the arrows / or slide your nger ▲ ▼
over the screen to select a channel from 1 to
20.
4) Touch one or more of the control zone buttons
(A,B,C) to select ash zones you want to use.
* In the display example, the channel number
20 is selected.
5) Touch the OK tab to conrm settings and
return to the Measuring screen. (Touch the
Cancel tab to cancel settings.)
* See the Operating Manual for the radio
receiver to learn about settings for the radio
receiver incorporated into the ash. Zones
Channel numbers radio receiver
incorporated into the ash.
Radio Control Functions (for L-478DR only)
10_2
Channel Setting in Radio Triggering Mode
Using the Radio triggering mode with operations for using
PocketWizard® Standard Channels.
Setting Standard Channel
1) Touch the Tool Box icon
at the bottom of
the Measuring screen to display the Tool Box
screen.
2) Touch the Radio CH/Zone button to display
the Radio Trigger Channel / Zone setting
screen. Then touch the CTL tab to activate
the ControlTL settings.
3) Touch the arrows / or slide your nger ▲ ▼
over the screen to select a channel from 1 to
32. Channels 1-16 provide single triggering(no
zone).
4) Select channel numbers17-32 to display zone
buttons A, B, C, D provide control of up to
four zones of lighting.
· The displayed example below is for channel
number 32.
· Touch the OK tab to conrm settings and
return to the Measuring screen. (Touch the
Cancel tab to cancel settings.)
* See the Operating Manual for the radio receiver
to learn about settings for the radio receiver
incorporated into the ash. Zone
Channel numbers
Radio Control Functions (for L-478DR only)
11_1 Adjusting Flash Intensity
Setting the flash intensity with Power Control Functions.
1) Touch the Measuring Mode Selection button
top left of the Measuring screen enter the
Measuring Mode Selection Screen.
Touch the icon/button to select the Flash
Power Control Mode button and return to the
Measuring screen.
2) Touch the Power Control icon to display
the Power Control screen.
3) Set ash intensity output at the Power Control
screen. Be sure to set the channel number
you are using. (See 10-1 for details.)
1.
Touch the Zone buttons you want to select.
When using ControlTL✔ ® channel:
A to C buttons 1 are set at bottom.
When using Standard channel:✔
A to D buttons 2 set in column.
1
2
8
3
4
56
7
Power Control screen
ControlTL+Standard17~32Ch
2
Power Control screen
ControlTL+Standard1~16Ch
1
Standard settings provide control of up to four zones of lighting indicated
as a Zone letter (A, B, C or D). It is not possible to activate Quad-triggering
control without rst selecting a channel 17-32, and a Quad-Triggering zone
(A, B, C or D).
Radio Control Functions (for L-478DR only)
11_2 Adjusting Flash Intensity
2. The Power Bar (Output Adjustment screen) for the selected
zone will become available.Hold down the Measuring button to
display the current ash intensity output at 3 and the Power
Bar in 4 above.
3. Either touch the plus/minus [+]/[–] symbols or move the bar with
your ngertip to set the values.
4. To select other zones and set values, repeat process 1 to 3
above.
5. The F value (f-stop) for each zone calculated out from the set
T(shutter speed) and ISO sensitivity value is displayed in
5 and
the average F value (f-stop) for all zones is displayed in 6.
6. When ash modeling lamps are being used, touch 7
to
turn off the modeling lamp.
Touch 7 to turn on modeling lamps again if needed.
4) Pressing the Measuring button once will transmit information about
intensity change to the ash.
(At this time, the ash will be triggered, but the intensity will be the one
prior to intensity adjustment.)
To measure the intensity exposure of the flash after intensity
adjustment, the Measuring button must be pressed again.
5) Take a measurement by placing the meter at the position of the subject
with the Lumisphere facing toward the camera’s lens axis. The ash will be
triggered and the measured value (F value) at that time will be displayed.
6) Repeat process 4) and 5) of ash intensity adjusting until the desired F
values are obtained.
PocketWiazard® is a registered trademark of LPA Design.
SEKONIC CORPORATION
7-24-14, Oizumi-Gakuen-cho, Nerima-ku Tokyo
178-8686 JAPAN
TEL +81-3-3978-2335 FAX +81-3-3922-5229
http://www.sekonic.com
JR1297621
Product specificaties
| Merk: | Sekonic |
| Categorie: | Lichtmeter |
| Model: | LiteMaster Pro L-478D |
Heb je hulp nodig?
Als je hulp nodig hebt met Sekonic LiteMaster Pro L-478D stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Lichtmeter Sekonic
14 November 2024
14 November 2024
20 Maart 2023
20 Maart 2023
20 Maart 2023
6 Juni 2023
20 Maart 2023
20 Maart 2023
8 Mei 2023
6 Mei 2023
Handleiding Lichtmeter
- Lichtmeter Amprobe
- Lichtmeter Beha-Amprobe
- Lichtmeter Extech
- Lichtmeter Fluke
- Lichtmeter Gossen
- Lichtmeter KlikaanKlikuit
- Lichtmeter PCE Instruments
- Lichtmeter Pyle
- Lichtmeter Quantum
- Lichtmeter Uni-T
- Lichtmeter Velleman
- Lichtmeter Voltcraft
- Lichtmeter Steren
- Lichtmeter Klein Tools
- Lichtmeter Testo
- Lichtmeter Testboy
- Lichtmeter Kyoritsu
- Lichtmeter Delta Ohm
Nieuwste handleidingen voor Lichtmeter
17 November 2024
14 November 2024
8 April 2024
6 Maart 2024
6 Maart 2024
6 Maart 2024
5 Januari 2024
4 Januari 2024
27 November 2023
14 November 2023