Scosche CR1286B Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Scosche CR1286B (3 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 186 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3
INTRODUCTION / PRELIMINARY
IN-DASH INSTALLATION KIT FOR
If you have any further questions call: TECH HELP 1-800-621-3695x3
©2006 SCOSCHE INDUSTRIES, INC. CR1286B 3/06 (3000431)
CR1286B
WIRE CODES
For Factory Wiring Codes go to: www.scosche-cars.com
LIABILITY DISCLAIMER
This instruction booklet is based on carefully documented data and research of automobile dash disassembly, wire harness/codes
and information pertaining to installation of this kit in the listed vehicles. Manufacturer cannot be held responsible for discrepancies/
inconsistencies that may occur due to the automobile manufacturing changes or options, or damage that may occur in the
automobile during the installation of components while using this booklet.
NOTES:
• See your vehicle’s instructions for any special tools your installation might require.
• Read all instructions accompanying your car stereo/cassette player for proper wiring and mounting
instructions.
Thank you for purchasing the Scosche CR1286 Kit. This kit was manufactured with the highest of quality
standards.
SELECT 2004-UP CHRYSLER, DODGE & JEEP
VEHICLES W/O NAVIGATION
DIN
MOUNT
RADIO
5604
KIT PANEL
5742L
ISO BRACKETS
5605
TRIM RING
5742R
ISO BRACKETS
CHRYSLER
2004-UP 300
DODGE
2006-UP CHARGER
2005-UP DAKOTA
2004-UP DURANGO
2004-UP MAGNUM
2006-UP RAM
JEEP
2005-UP GRAND CHEROKEE
VEHICLE DISASSEMBLY
2004-UP Chrysler 300
2004-UP Dodge Magnum
1. Using a panel removal tool, carefully pry out ashtray and ashtray housing.
2. Starting from the bottom, carefully pry out the radio/climate control dash bezel. Disconnect and remove.
3. Remove four (4) Phillips head screws from radio bracket. Disconnect and remove.
2006-UP Dodge Ram
Radio Removal:
1. Unsnap the top portion of center console using a panel removal tool.
2. Extract (3) Philips head screws securing the rest of the center console. Lift away and remove.
3. Extract (2) Philips head screws securing a trim panel that meets the carpet and the dash together.
4. Once trim panel is removed, unsnap the panel from behind that would originally hug the center console.
5. After the panel is removed, access and extract (2) Philips head screws screwed in a vertical direction
securing the dash bezel surrounding the radio.
6. Using a panel removal tool, unsnap the dash bezel surrounding the radio. Lift away, disconnect and
remove
2004-UP Dodge Durango
Radio Removal:
1. Using a Phillips screw driver, remove two (2) screws in an upward angle at bottom edge of radio and
A/C control bezel.
2. Using panel removal tool, pop out radio dash bezel and remove.
3. Using a Phillips screw driver, remove four (4) screws from radio, disconnect and remove.
2005-UP Dodge Dakota
Radio Removal:
1. Extract two (2) Phillips head screws at bottom of center dash bezel.
2. Using panel removal tool, carefully unsnap center dash bezel from top to bottom, lift away, disconnect
and remove.
3. Extract (4) four Phillips head screws securing radio, lift away, disconnect and remove.
2006-UP Dodge Charger
Radio Removal:
1. Using panel removal tool, unsnap the dash bezel surrounding the factory radio, lift away, disconnect
and remove.
2. Extract (4) four Phillips head screws securing radio, lift away, disconnect and remove.
2005-UP Jeep Grand Cherokee
Radio Removal:
1. Using panel removal tool, carefully unsnap radio trim bezel, lift away and remove.
2. Extract four (4) Phillips head screws securing the radio, lift away, disconnect and remove.
2


Product specificaties

Merk: Scosche
Categorie: Niet gecategoriseerd
Model: CR1286B

Heb je hulp nodig?

Als je hulp nodig hebt met Scosche CR1286B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Scosche

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd