Schmick SK156R-B Handleiding

Schmick Koelkast SK156R-B

Lees hieronder de 📖 handleiding in het Nederlandse voor Schmick SK156R-B (9 pagina's) in de categorie Koelkast. Deze handleiding was nuttig voor 10 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/9
Fridge Operation Manual
Models SK90 SK92 SK116 SK126 SK141 SK146
SK156 SK206 SK245 SK246 SK386
This appliance is intended to be used in household and similar applications including use in
commercial settings.
General Safety Instructions
READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
Read this manual thoroughly before first use, even if you are familiar with this type of product. The safety
precautions enclosed herein reduce the risk of fire, electric shock and injury when correctly adhered to. Keep the
manual in a safe place for future reference, along with the completed warranty card, purchase receipt and carton. If
applicable, pass these instructions on to the next owner of the appliance.
Pay particular attention to messages t his safety alert symbolhat follow t or the words DANGER, WARNING or
CAUTION. These words are used to alert you to a potential hazard that can seriously injure you and others. The
instructions will tell you how to reduce the chance of injury and let you know what can happen if the instructions are
not followed.
This symbol alerts you to take care as the appliance contains flammable materials: isobutane as refrigerant
and cyclopentane as insulation blowing gas. While isobutane (R600a) is a gas with a high level of environmental
compatibility, it is nevertheless flammable. Do not expose the appliance to high heat, sparks and open flames.
During transport and installation, ensure that none of the components of the refrigerant circuit become damaged.
Refrigerant matters
WARNING: Do not damage the refrigerant circuit! Never use an appliance with a damaged refrigerant circuit! If the
refrigerant circuit becomes damaged, avoid proximity to open fires and all types of heat and ignition sources.
Thoroughly ventilate the room in which the appliance is located. The room for installing the appliance must be at
least 1m³ per 8g of refrigerant. The amount and type of refrigerant in the appliance can be found in the Technical
Specifications on the ‘Ba e’ sic Instructions Pag and on the appliance rating plate.
It is hazardous for anyone other than an authorised service person to service
this appliance. In Queensland, the authorised service person MUST hold a Gas
Work Authorisation for hydrocarbon refrigerants to carry out servicing or
repairs which involve the removal of covers the opening of refrigeration and
piping system.
Responsible disposal
At the end of its working life, do not throw this appliance out with your household rubbish. Electrical and electronic
products contain substances that can have a detrimental effect on the environment and human health if disposed of
inappropriately. Observe any local regulations regarding the disposal of electrical consumer goods and dispose of it
appropriately for recycling and recovery of the refrigerant and blowing agent. Contact you icipal authorities for r mun
advice on recycling facilities in your area.
WARNING! This refrigeration appliance contains flammable refrigerants and insulation blowing gases, which must be
removed before disposal. Contact your municipal authorities for any codes or regulations concerning the disposal of
such materials. Risk of child entrapment: When discarding this or another refrigerator, make sure to take DANGER!
off the door and leave the shelves/racks/drawers in place so that children b in ancannot easily clim d get trapped
inside.
Electrical safety
Voltage: Plug the appliance in a 220-240V, 50Hz, properly earthed power outlet, which must be in good
working order. Make sure your outlet voltage and circuit frequency correspond to the voltage stated on the appliance
rating label.
Power connection: Do not use an adaptor; do not use an extension cord. Plug the power plug directly into a
separate power point that cannot easily be turned off accidentally, and that is easily accessible so you can switch it
off when required.
Power cord: Do not kink or damage the power supply cord. Do not leave it exposed or dangling. Secure it
behind the appliance so no one steps on or places anything on the power supp gainst it. A squashed or ly cord or a
damaged power plug may overheat and cause a fire.
Damaged cord: Do not use a cord that shows cracks or abrasion damage along its length or at either end.
Any damage to the cord may cause a short circuit, fire and/or electric shock. If the power cord is damaged, it must be
replaced by the manufacturer or its service agent. Contact the service department on 1300 376849 (Ext2) or email
vicservice@bar aust- s-fridge ralia.com.au
Disconnection: Never unplug the unit by pulling the cord. Always grip the plug firmly and pull straight out
from the power point.
Electrical work: If the installation of this appliance requires any electrical work, make sure it is carried out by
a qualified electrician.
General Safety Instructions (Continued)
Usage conditions and restrictions
Indoor domestic and/or commercial use: This appliance is intended for indoor domestic use or industrial /
commercial.
Intended purpose: Do not use this appliance for anything other than its intended purpose, and only use it as
described in this manual. Do not attempt to alter or modify this appliance in any way.
Usage restrictions: This appliance is not intended for use by persons ( ing chinclud ildren) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning the use of the appliance by a person responsible for their safety.
Children rvise : Supe children to ensure they do not play with the appliance. Close supervision is necessary
when any appliance is used by or near children. Never allow children to operate, play with or crawl inside the
appliance.
WARNING! Do not use any electrical ap es (such as ice cream makers) inside refrigeration plianc appliances,
unless they are approved for this purpose by the manufacturer.
Cleaning and maintenance
Disconnect: Unplug the appliance before cleaning or servicing. Failure to do so can result in electric shock,
injury or death. Do not connect or disconnect the plug when your hands are wet.
Flames: Do not let open flames or ignition sources enter the appliance.
Flammable/explosive substances: Never clean this appliance with flammable fluids. Do not store or use
volatile, flammable or explosive substances such as aerosol cans with a flammable propellant in or close to this or
any other appliance. The fumes can create a fire hazard or explosion.
Solvents: Do not use solvent based cleaning agents or abrasives on the interior as these may damage or
discolor the surfaces of the appliances.
Door S oieal: Use eucalyptus l twice a year with clean cloth to wipe and clean the ‘door seal’.
WARNING! Do not use mechanical devices or other means to accelerate the defrosting process. Never use a
sharp or metal instrument to remove frost or clean the appliance. Use a plastic scraper, if necessary.
Service: Do not attempt to repair, modify or replace any part of the appliance unless specifically
recommended in this manual. Refer all other servicing to ied technician, or contact the sales support line for a qualif
advice on examination or repair of the appliance on 1300 376849 (Ext2), you can also email on vicservice@ -bar
fridges- australia.com.au
Do not use sharp objects for cleaning. Do not use high pressure water
Clean the inside cabinet of cooler with a clean damp cloth or with neutral soap. Avoid damage by never
using abrasive or flammable cleaning products.
If you have purchased a stainless steel model, please see stainless steel care se. guide supplied with purcha
Clean the condenser every 6 12 months with a vacuum cleaner or a brush to eliminate the dust
accumulation. This is located at rear of unit at the bott , you need to remove the rear om and is the big wire part
panel for access. An indoor unit will not need as much attention.
Storage inside the cabinet
- noIt is 100% t recommended to store blood or special pharmaceuticals in the fridge, warranty does not cover
contents’ in any circumstance
-Keep drinks at least 1cm away from walls to allow better air flow
Installation
Heavy: This appliance is heavy, take care when moving it. To avoid back or other injury, consider a two
person lift or mechanical aid when installing it. Failure to do so can result in back or other injury.
Built In & Freestanding design: This appliance is designed to be built into’ cabinetry or freestanding, **Note:
Front ventin grillg bottom must be kept clear at all times, you cannot have cabinet doors in front of fridge doors, call
us for options if this is what you want to do.
Keep it upright: Do not tilt the fridge more than 45º from upright when moving it.
Handle with care: Do not apply force to any part such as the condenser or door , don’t carry holding door.
WARNING! Ventilation: To ensure proper ventilation, keep any ventilation openings, in the appliance
enclosure or in the built-in structure, clear of obstructions. Ensure adequate air circulation around the appliance to
prevent overheating.
Wh p t en ositioning he appliance ensure the supply cord is not trapped or damaged.
Do not locate multiple portable socket outlets or portable power supplies at the rear of appliance.the
Level: Install the appliance level in order to ensure proper operation. If necessary, adjust the levelling legs at
t he bottom of the unit.
Location: Install the appliance in an area that meets the following requirements:
- The ambient temperatures must correspond to the climate class (T) indicated on the rating plate of the appliance:
16°C to 43°C.
- The floor must be sturdy, level and strong enough to support the the unit when fully loaded, avoid area’s where
appliance would be exposed to direct sunlight, sources of heat, (stove, heater, radiator, etc.), extreme cold ambient
temperatures or excessive moisture and high humidity (such as outdoors or exposed to wind, rain water spray or
drips). Installing it in the coolest area of room will sathe room will the ve energy consumption and running costs.
Avoid positioning anywhere where water can penetrate under or on top of the cooler. It could cause
damage to the internal workings and is potentially dangerous.
I Po . When n sition: Allow 30minutes and turn ON
The importer is not responsible for damages or accidents arising from the misuse or disregard of electrical laws
relevant to the country where thus product is used
.
Fridge Basic Instructions
1. Unit is ready to plug in.
2. Thermostat is electronic control, there are 2 x versions used in this range, see pages 6 & 7 for full details of
operation.
3. A l . ll shelving is fully adjustable and is heavy duty design, more she ving available upon request
4. Depending on ‘ model purchased the switches at rear control heated glass (on/off) and fan speed (high/low),
some just have heated glass switch, fan speed is for area’s over 38oC where for operation. high is better
5. For warranty es and claims pleenquiri ase either phone 1300 376849 Ext 2 Mon > Fri 8:30AM > 4:30PM, or
simply email Vicservice@bar-fridges-australia.com.au
6. Things you need to know;
a. chill Uni can t 0oto about C, great for cold drinks.
b. Uni idge t is compressor driven and this running iyou will hear f near the fr .
c. Unit has refrigeration gas running through piping, this sometimes if you are close to unit, may sound
like ‘gurgling’ a normal operation. nd is
d. bui Do not place in direct sunlight or ld in behind a cupboard door.
e. Ensure door is closed properly after opening.
f. display fluctuates *Units ‘cycle’ up/down during normal operation, so led about 4oC from SET
temperature. Unit goes into defrost mode every 4 hrs, display may rise high s period, it during thi
doesn’t mean drinks are the display temp, drinks stay cold.
Specifications
Controller Operations
**Note: 2 x versions of controller are used depending on supply chain issues.
Danfoss ECO Controller
If you set your fridge to 0, your fridge will cycle from 0 – 4 and keep your drinks around 2 degrees Celsius
Schmick ECO Controller
Trouble Shooting / Basic Info
There are basic thing and cs you n ed to looke heck before trying to initiate a technician call out for
warranty circumstances.
*This link may also help, it is our Knowledge Base where you can troubleshoot.
http://kb.bar- - m.au/fridges australia.co
Noise
If you unit has become noisy, please check the following;
- Can you ascertain exactly where the noise is coming from? It may be a loose screw or f part o
the fridge that is now vibrating and is easy to fix.
- Is the compressor / fridge level, a ssor not level wicompre ll make a clunkingnoise on start-
up and shut down.
- Does the fan sound noisy? It may be as simple as needing slight adjustment or you may see
ice bu ild up near the fan inside.
g Not Coolin
A . ll of a sudden unit has stopped cooling
- Does the compressor run? Make sure compressor is running, if it is running and still not
cooling and you have a warm fridge then there may be a gas pro will be blem and technician
needed.
- Have you got the thermostat set correct? Or has it been altered or changed.
- Is your door sealing properly, check all the way around door seal to make sure it is seating
correct on fridge body, small gaps won’t a c ffect ooling.
- Check inner and rear fans are going
Compliance
All units have been registered under section 43 of the new Greenhouse Minimum Energy
Standard Standards ACT, using -ISO23953 2 Testing (GEMS).
This product has been fully tested and meets all requirements as set out by electrical and
safety standards AS/NZS 60335.1 and AS/NZS 60335.2.24
The RCM Mark (Regulatory Compliance Mark) indicates that the product complies w ith
the relevant guidelines of the A ACM as well as corresponding government requirements
for the safety of electrical devices.
WARRANTY - Unit comes with Australia w cide 24Month omprehensive warranty.
Contact PH: 1300 170640 (Ext2) or email vicservice@bar- - fridges australia.com.au with your
Serial Number, Purchase Invoice Number and Fridge Model details for warranty queries.
*Or go to this link;https://www.bar- -fridges australia.com.au/making-a-warranty- claim.html
VERY IMPORTANT INFORMATION FOR STAINLESS STEEL VERSIONS
CARE AND PROTECTION OF STAINLESS STEEL SURFACES
The interior and exterio surfaces of your bar fridge have been manufactured using stainless r
steel, a material which is graded according to its composition and resistance to corrosion.
For example, 304 grade is most commonly used in the food service industry and 316 grade
is often referred to as marine grade”. There are many lesser grades but your Rhino fridge
uses either one or both of 304 and 316 grade.
Even the top grade of stainless s not immune to corrosion and be cared for with teel is must
an appropriate maintenance regime. Without such care, some degree of deterioration can be
expected which might range from mild “tea staining” to heavy surface corrosion.
To keep yo we recommend that owners ur fridge in tip top condition- , use a clean lint-free
cloth to apply a thin layer of Olive Oil to all ‘exposed’ s. Stainless Steel area This should then
be polished in and buffed off with o a nonseparate cloth t -oily finish Always ap. ply in the
direction of the grain. protection against This process will assist in corrosive salt spray
environments. The Olive Oil layer also makes later polishing and removal of fingerprints
easier. This process should be repeated frequently every 3 depending upon the -4 months
location. For example a beachside area with heavy airborne salt spray may benefit from
more regular application.
We recommend that you avoid using abrasive cream cleaners since these will scratch the
stainless steel and promote corrosion. If you are using a dedicated stainless steel cleaning
product, please always follow the manufacturer’s instructions.
The glass door can simply be cleaned with a readily available glass cleaning product.
Note: Please unplug the appliance from the mains power prior to doing any cleaning
operations. Never inundate the cabinet with water during cleaning.
Look after your investment carefully and it will serve you well for many years to
come.


Product specificaties

Merk: Schmick
Categorie: Koelkast
Model: SK156R-B

Heb je hulp nodig?

Als je hulp nodig hebt met Schmick SK156R-B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Koelkast Schmick

Handleiding Koelkast

Nieuwste handleidingen voor Koelkast