Saramonic SmartRig II Handleiding

Saramonic Microfoon SmartRig II

Lees hieronder de 📖 handleiding in het Nederlandse voor Saramonic SmartRig II (4 pagina's) in de categorie Microfoon. Deze handleiding was nuttig voor 24 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

User Manual

Product Structure

Specifications

Frequency Response

Noise

Maximum output level

Distortion

Phantom max current

Dimensions

Weight

20Hz to 20kHz (+/-1.5dB)

-98 dB full band, phantom power ON

2 Vrms

0.025% THD

13mA

L 88 x W 41 x H 42 mm

75g ( 2.57oz. )

SmartRig II

Audio Adapter

The SmartRig II from Saramonic is an easy solution

to connect professional microphones/guitars with

your iPhone, iPad, iPod touch and Android devices

PRODUCT INTRODUCTION

General Introductions

The SmartRig II from Saramonic is an easy solution to

connect professional microphones/guitars with your

iPhone, iPad, iPod touch and Android devices.

As a high-quality microphone preamp, SmartRig II allows

you to use professional stage microphones or high-end

studio microphones to create music with your iOS or

Android devices.

Simply plug the microphone into the standard XLR

connector of SmartRig II and connect it to your device with

the 3.5mm output cable.

The provided gain control thumbwheel makes it easy to set

precise levels. Processed sound can be monitored through

a 3.5mm headphone out.

Highlights

• Combo 1/4" (6.35mm) and XLR input

• Power/Phantom power provided by 9V battery

• +48V phantom power

• 3.5mm headphone output for monitoring

• +48V/OFF/ON switch

• Gain control

• Power/Phantom power provided by 9V battery

Quick Start Guide

1. Install a 9V battery. Gently slide out the battery cover in

the direction of the arrow at the back of unit. Insert the

battery with the “+” positive terminal lined up with the

“+” indicator on the battery compartment.

2. Connect SmartRig II to your iOS or Android device’s

headphone jack.

3. Connect your microphone to the XLR input of SmartRig II.

4. Download a recording application supporting real-time

input/output pass-through. Then you are be able to

monitor the audio during recording.

5. Turn on the SmartRig II. Slide the power switch to the ON

position. The green LED will light.

6. If your microphone needs phantom power, please slide

the power switch to the +48V position. The red and

green LEDs will light at the same time.

7. You are now ready to record by the microphone on your

device. Adjust the GAIN control flexibly to get the the

optimum signal levels. Check the input level meter on

the app. This level meter should peak as high as

possible but never reach the maximum level.

8. If you need to monitor your recording, please connect

your headphones to the head-phone output.

Tips:

• Be careful not to turn the phantom power ON with

passive ribbon microphones as the current may damage

it. Please turn ON phantom power ONLY if the ribbon

micro-phone clearly says it’s needed.

• Please set the GAIN properly during recording. If the

GAIN is too low, recordings will be too quiet, and they

will become too noisy when boosted within the apps. If

the GAIN is too high, recordings will be distorted.

• If you hear echoes when using high GAIN settings, please

lower the device volume with the volume button.

• If you can’t hear audio when monitoring, please make

sure the applications you choose can support real-time

input/output pass-through.

Warranty

1. Saramonic International provides one-year warranty

under normal use and lifelong paid maintenance from

the date you purchase this product.

2. Saramonic International will repair or replace the

product that under the warranty for free during the

one-year valid period, but customers should pay for

shipping and insurance charges for returning the

product to Saramonic International.

3. This warranty only applies where a defect has arisen,

wholly or substantially, as a result of faulty manufacture,

parts or workmanship during the warranty period.

4. This warranty does not cover:

• All damages caused by human factors include using the

products in abnormal conditions and operate the device

without according to the user manual.

• The guarantee is invalid if defect is caused by incorrect

use, poor maintenance or if persons not authorized by

Saramonic International have carried out alterations or

repairs.

• Damages caused by poor transportation after you

purchased this product.

• Force majeure such as fire, flood, lighting stroke,

earthquake.

• Customers who can not show valid invoice.

5. Wherever you purchased our products, you will be

served very well at local retailer.

6. Saramonic International reserves all the rights for the

ultimate interpretation.

Compatibility

Compatible with iPhone/iPod touch/iPad and Android

devices.

Any type of microphones: Dynamic, Ribbon, or Condenser.

Packing List

SmartRig II ×1

Velcro Strip ×1

User Manual ×1

Warranty Card ×1

Product specificaties

Merk:	Saramonic
Categorie:	Microfoon
Model:	SmartRig II
Kleur van het product:	Zwart
Breedte:	41 mm
Diepte:	88 mm
Hoogte:	42 mm
Soort:	Gitaarmicrofoon
Gebruiksaanwijzing:	Ja
Aan/uitschakelaar:	Ja
Connectiviteitstechnologie:	Bedraad
Microfoon, line-in ingang:	Ja
Volumeregeling:	Knoppen
Plug and play:	Ja
Aansluiting:	6.35 mm (1/4")
Gevoeligheid microfoon:	-98 dB
Frequentie microfoon:	20 - 20000 Hz
XLR out:	1
Aantal producten inbegrepen:	1 stuk(s)
RF vermogen:	13 mW
Gewicht microfoon:	75 g
Microphone Total Harmonic Distortion (THD):	0.025 procent