Samsung UN65EH6000 Handleiding

Samsung Televisie UN65EH6000

Lees hieronder de 📖 handleiding in het Nederlandse voor Samsung UN65EH6000 (4 pagina's) in de categorie Televisie. Deze handleiding was nuttig voor 53 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

Connections

yFor better picture and audio quality, connect to a digital device using an HDMI cable.

yThe picture may not display normally (if at all) or the audio may not work if an external

device that uses an older version of HDMI mode is connected to the TV. If such a problem

occurs, ask the manufacturer of the external device about the HDMI version and, if out of

date, request an upgrade.

yBe sure to purchase a certiﬁed HDMI cable. Otherwise, the picture may not display or a

connection error may occur.

yPC(D-Sub) PC/DVI AUDIO IN and input are not supported.

yFor HDMI/DVI cable connection, you must use the jack. HDMI IN 1(DVI)

yConnecting through the HDMI cable may not be supported depending on the PC.

yIf an HDMI to DVI cable is connected to the port, the audio does not work.HDMI IN 1(DVI)

yEX-LINK: Connector for service only.

Remote Control

✎This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually impaired persons.

Figures and illustrations in this User Manual are provided for reference

only and may differ from actual product appearance. Product design and

speciﬁcations may be changed without notice.

Important Warranty Information Regarding

Television Format Viewing

✎See the warranty card for more information on warranty terms.

Wide screen format LED Displays (16:9, the aspect ratio of the screen width to

height) are primarily designed to view wide screen format full-motion video. The

images displayed on them should primarily be in the wide screen 16:9 ratio format,

or expanded to ﬁll the screen if your model offers this feature and the images are

constantly moving. Displaying stationary graphics and images on screen, such as the

dark sidebars on non- expanded standard format television video and programming,

should be limited to no more than 5% of the total television viewing per week.

Additionally, viewing other stationary images and text such as stock market reports,

video game displays, station logos, web sites or computer graphics and patterns,

should be limited as described above for all televisions. Displaying stationary images

that exceed the above guidelines can cause uneven aging of LED Displays that leave

subtle, but permanent burned-in ghost images in the LED picture. To avoid this, vary

the programming and images, and primarily display full screen moving images, not

stationary patterns or dark bars. On LED models that offer picture sizing features,

use these controls to view different formats as a full screen picture. Be careful in the

selection and duration of television formats you use for viewing. Uneven LED aging as

a result of format selection and use, as well as burned-in images, are not covered by

your Samsung limited warranty.

• SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT

Subject to the requirements, conditions, exclusions and limitations of the original

Limited Warranty supplied with Samsung Electronics (SAMSUNG) products, and the

requirements, conditions, exclusions and limitations contained herein, SAMSUNG

will additionally provide Warranty Repair Service in the United States on SAMSUNG

products purchased in Canada, and in Canada on SAMSUNG products purchased

in the United States, for the warranty period originally speciﬁed, and to the Original

Purchaser only.

The above described warranty repairs must be performed by a SAMSUNG Authorized

Service Center. Along with this Statement, the Original Limited Warranty Statement

and a dated Bill of Sale as Proof of Purchase must be presented to the Service

Center. Transportation to and from the Service Center is the responsibility of the

purchaser. Conditions covered are limited only to manufacturing defects in material or

workmanship, and only those encountered in normal use of the product. Excluded, but

not limited to, are any originally speciﬁed provisions for, in-home or on-site services,

minimum or maximum repair times, exchanges or replacements, accessories, options,

upgrades, or consumables.

For the location of a SAMSUNG Authorized Service Center, please call toll-free:

–– In the United States : 1-800-SAMSUNG (1-800-726-7864)

–– In Canada : 1-800-SAMSUNG

Still image warning

Avoid displaying still images (such as jpeg picture ﬁles) or still image elements (such

as TV channel logos, panorama or 4:3 image format, stock or news bars at screen

bottom etc.) on the screen. Constant displaying of still pictures can cause ghosting of

LED screen, which will affect image quality. To reduce risk of this effect, please follow

below recommendations:

• Avoid displaying the same TV channel for long periods.

• Always try to display any image on full screen, use TV set picture format menu for

best possible match.

• Reduce brightness and contrast values to minimum required to achieve desired

picture quality, exceeded values may speed up the burnout process.

• Frequently use all TV features designed to reduce image retention and screen

burnout, refer to proper user manual section for details.

Securing the Installation Space

Keep the required distances between the product and other objects (e.g. walls) to

ensure proper ventilation.

Failing to do so may result in ﬁre or a problem with the product due to an increase in

the internal temperature of the product.

✎When using a stand or wall-mount, use parts provided by Samsung

Electronics only.

xIf you use parts provided by another manufacturer, it may result in a

problem with the product or an injury due to the product falling.

✎The appearance may differ depending on the product.

✎Be careful when you contact the TV because some parts can be somewhat

hot.

Installation with a stand. Installation with a wall-mount.

4inches

Channel Menu

Seeing Channels

Channel List

Add, delete or set Favorite channels and use the program guide for

digital broadcasts. Select a channel in the All Channels, Added

Channels Favorite Programmed, or screen by pressing the ▲

/ buttons, and pressing the ▼ENTER

button. Then you can

watch the selected channel.

Added Channels

6 Air

6-1 ♥ TV #6

7-1 ♥ TV #7

8 Air

9 Air

9-1 ♥ TV #9

10 Air

10-1 ♥ TV #10

11-1 ♥ TV #11

Air Zoom Select ''T Tools ► Next Program

■

All Channels: Shows all currently available channels.

■

Added Channels: Shows all added channels.

■*

Favorite: Shows all favorite channels.

■

Programmed: Shows all currently reserved programs.

✎Using the remote control buttons with the Channel List

xGreen (Zoom): Enlarges or shrinks a channel number.

xYellow (Select): Selects multiple channel lists. Select desired

channels and press the Yellow button to set all the selected

channels at the same time. The

mark appears to the left of

the selected channels.

( ): Displays the option menu. (The Tools Channel List

Options menus may differ depending on the situation.)

Channel Status Display icons

Icons Operations

A channel selected.

A channel set as a Favorite.

)

A reserved program.

(

A program currently being broadcast.

Memorizing channels

Antenna (Air / Cable)

Before your television can begin memorizing the available channels,

you must specify the type of signal source that is connected to the

TV (i.e. an Air or a Cable system).

Auto Program

✎When selecting the Cable TV system: Selects the cable

system. STD, HRC and IRC identify various types of cable

TV systems. Contact your local cable company to identify the

type of cable system that exists in your particular area. At this

point, the signal source has been selected.

✎After all the available channels are stored, it starts to

remove scrambled channels. The menu then Auto program

reappears.

✎Press the ENTER

button to stop the channel store during

Auto Program.

How to Stop Auto Programming

1. Press the ENTER

button.

2. Stop Auto Program?A message will ask Select Yes by

pressing the or button.◄ ►

3. Press the ENTER

button.

Other Features

Clear Scrambled Channel

This function ﬁlters out scrambled channels after is Auto Program

completed. This process may take up to 20~30 minutes.

✎Press the ENTER

button to stop the Clear Scrambled

Channel.

✎This function is only available in mode. Cable

Channel List

Channel List Option Menu

Set each channel using the menu options. Option Channel List

menu items may differ depending on the channel status.

■

Add / Delete: Delete or add a channel to display the channels

you want.

✎All deleted channels will be shown on the All Channels

menu.

✎A gray-colored channel indicates the channel has been

deleted.

✎The menu only appears for deleted channels.Add

✎Delete a channel from the Added Channels or Favorite

menu in the same manner.

■

Add to Favorite / Delete from Favorite

: Set channels

you watch frequently as Favorites.

■

Timer Viewing: You can set a desired channel to be displayed

automatically at the set time; even when you are watching

another channel. Set the current time ﬁrst to use this function.

✎Only memorized channels can be reserved.

✎Reserved programs will be displayed in the Programmed

menu.

✎When a digital channel is selected, press the (►Next

Program) button to view the digital program. If you select

the ENTER

( ) button on the next program, you Schedule

can set Timer Viewing directly.

■

Channel Name Edit (analog channels only): Assign your own

channel name.

■

Select All: Select all the channels in the channel list.

■

Deselect All: Deselect all the selected channels.

✎You can only select Deselect All when one or more

channels are selected.

■

Auto Program: Scans for a channel automatically and stores in

the TV

Programmed

(in )Channel List

You can view, modify or delete a show you have reserved to watch.

■

Change Info: Change a show you have reserved to watch.

■

Cancel Schedules: Cancel a show you have reserved to watch.

■

Information: Display a show you have reserved to watch. (You

can also change the reservation Information.)

■

Select All / Deselect All: You can select or deselect all channels

in the channel list.

Sound Menu

Mode

■

Standard: Selects the normal sound mode.

■

Music: Emphasizes music over voices.

■

Movie: Provides the best sound for movies.

■

Clear Voice: Emphasizes voices over other sounds.

■

Amplify: Increase the intensity of high-frequency sounds to allow a

better listening experience for the hearing impaired.

Equalizer

(standard sound mode only)

■

Balance L/R: Adjusts the balance between the right and left

speaker.

■

100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth Adjustment):

Adjusts the level of speciﬁc bandwidth frequencies.

■

Reset: Resets the equalizer to its default settings.

SRS TruSurround HD

(standard sound mode only)

SRS TruSurround HD is a patented SRS technology that solves the

problem of playing 5.1 multichannel content over two speakers.

TruSurround delivers a compelling, virtual surround sound experience

through any two-speaker playback system, including internal

television speakers. It is fully compatible with all multichannel formats.

Preferred Language

(digital channels only)

Digital-TV broadcasts are capable of simultaneous transmission of

many audio tracks (for example, simultaneous translations of the

program into foreign languages).

✎You can only select a language from among the ones being

broadcasted.

Multi-Track Sound (MTS)

(analog channels only)

■

Mono: Choose for channels that are broadcasting in mono or if

you are having difﬁculty receiving a stereo signal.

■

Stereo: Choose for channels that are broadcasting in stereo.

■

SAP: Choose to listen to the Separate Audio Program, which is

usually a foreign-language translation.

✎Depending on the program being broadcast, you can listen to

Mono, Stereo or SAP.

Auto Volume

Because each broadcasting station has its own signal conditions,

the volume may ﬂuctuate each time channel is changed. This feature

lets you automatically adjust the volume of the desired channel by

lowering the sound output when the modulation signal is high or by

raising the sound output when the modulation signal is low.

SPDIF Output

The SPDIF (Sony Philips Digital InterFace) outputs an uncompressed

digital audio signal when you connect the digital audio jack on the

back of the TV to a digital audio in jack on a receiver or home theater.

■

Audio Format: You can select the Digital Audio output (SPDIF)

format. The available Digital Audio output (SPDIF) format may differ

depending on the input source.

✎By connecting the T V to a receiver or home theater with Dolby

Digital and 5.1ch speakers and selecting Dolby Digital, you

can maximize your interactive 3D sound experience.

■

Audio Delay: Lets you correct timing mismatches between the

audio track and the video when you are watching the TV and

listening to digital audio output from the TV through an external

device such as an AV receiver. When you select , a Audio Delay

slider appears. Use the left and right arrow buttons to adjust the

slider. Press ENTER

when done (0ms ~ 250ms).

Speaker Select

■

Speaker Select (External Speaker / TV Speaker): If you are

listening to the sound track of a broadcast or movie through an

external receiver, you may hear a sound echo caused by the

difference in decoding speed between the TV’s speakers and the

speakers attached to your audio receiver. If this occurs, set the TV

to .External Speaker

✎When you set Speaker Select to External Speaker, the

TV’s speakers are turned off. You will hear sound through the

external speakers only. When you set Speaker Select to TV

Speaker both the TV’s speakers and the external speakers

are on. You will hear sound through both.

✎When Speaker Select External Speaker is set to , the

VOLUME and MUTE buttons will not operate and the sound

settings will be limited.

✎If there is no video signal, both the T V’s speakers and the

external speakers will be mute.

Sound Reset

■

Reset All: Resets all sound settings to the factory defaults.

Setup Menu

Setting the Time

Time

✎The current time will appear every time you press the INFO

button.

■

Clock: Setting the clock is for using various timer features of the

TV.

✎If you disconnect the power cord, you have to set the clock

again.

Clock Mode: Set the current time manually or automatically.

Clock Set Month Day Year Hour Minute am/pm: Set the , , , , and .

✎Available only when Clock Mode is set to Manual.

Time Zone: Select your time zone.

DST (Daylight Saving Time): Switches the DST (Daylight Saving

Time) function on or off.

✎DST and function is only available when the Time Zone

Clock Mode is set to .Auto

■

Sleep Timer

Automatically shuts off the TV after a preset period of time. (30,

60, 90, 120, 150 and 180 minutes).

✎To cancel the Sleep Timer, select Of f.

Timer 1 / Timer 2 / Timer 3

Three different on / off timer settings can be made. You must set the

clock ﬁrst.

■

On Time / Off Time: Set the hour, minute, am/pm and Activate /

Inactivate. (To activate the timer with the setting you have chosen,

set to .)Activate

■

Volume: Set the desired volume level.

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung

products, please contact the SAMSUNG customer care center.

Country CANADA U.S.A

Address

Samsung Electronics

Canada Inc., Customer

Service 55 Standish

Court Mississauga,

Ontario L5R 4B2

Canada

Samsung Electronics

America, Inc.

85 Challenger Road

Ridgeeld Park, NJ

07660-2112

Customer Care

Center



1-800-SAMSUNG(726-7864)

Web Site

www.samsung.com

LED TV

user manual

Getting Started

Accessories

• Remote Control (AA59-00600A) &

Batteries (AAA x 2)

• Warranty Card / Safety Guide

• Owner’s Instructions

• Power Cord

• Wire Holder Stand (BN61-05491A)

Input Cables (Sold Separately)

• RS232 (AA39-00311A)

• Audio

• HDMI

• HDMI-DVI

• Component

• Composite (AV)

• Coaxial (RF)

✎Check the cable before plug-in

Cable Ports

HDMI

USB

Optical

Do not plug cable upside down.

Be sure to check before plug-in.

TV Controller (Panel Key)

Power on Turns the TV on by pressing the controller in standby mode.

Adjusting the volume Adjusts the volume by moving the controller from side to

side when the power is on.

Selecting a channel Selects a channel by moving the controller up and down

when the power is on.

Using the function menu

Press the controller when the power is on, then the function

menu screen appears. If you press it again, the function

menu screen disappears.

Selecting the Media Play

Selects the by moving the controller in the MEDIA.P

function menu screen. The main screen Media Play

appears.

Selecting the MENU (m)

Selects the ) by moving the controller in the MENU(m

function menu screen. The OSD(On Screen Display) of your

TV’s feature appears.

Selecting the Source

List (s)

Selects the ( ) by moving the controller in the Source List s

function menu screen. The screen appears.Source List

Power Off (

)Selects the Power Off (

) to turn the TV off by moving the

controller in the function menu screen.

✎Exits the menu when pressing the controller more than 1 second.

✎When selecting the function by moving the controller to the up/down/lef t/

right directions, be sure not to press the controller. If you press it first, you

cannot operate it to move the up/down/left/right directions.

Plug & Play (Initial Setup)

When you turn the TV on for the ﬁrst time, a sequence of on-screen

prompts will assist in conﬁguring basic settings. Press the POWER

button. is available only when the Input source is set to Plug & Play

TV.

✎Connecting the power cord and antenna. (refer to

‘Connections’)

Selecting a language

Select Language of the OSD.

Language

Move

Enter

Plug & Play







English

Español

Français

Select the desired OSD (On Screen

Display) language.



Selecting a Home Use mode

Select ‘Home Use’ when installing this TV in your home.

Move

Enter

Plug & Play

Home UseStore Demo









• Select the mode. Home Use Store

Demo mode is for retail environments.

• When pressing TV controller, the

function menu screen appears. Select

the MENU(m) and press it more than 5

seconds using the controller. The Store

Demo Store mode is set. Cancel the

Demo by selecting Source List( ) s

and pressing it more than 5 seconds.



Selecting an antenna

Select the Antenna source to memorize.

Air Start

Cable Start

Auto Start

Move

Enter

Skip

Plug & Play







In Cable mode, you can select the correct

signal source among , and STD HRC, IRC

by pressing the or ▲, ▼, ◄ ► button.



Setting the Clock Mode

Set the Clock Mode.

Clock Mode : Auto

Plug & Play

Enter

Skip





Set the automatically or Clock Mode

manually.

• If you select the Auto, set the

DST(Daylight Saving Time).

• On the DST screen, press ENTER

then select whether to turn DST

(Daylight Savings Time) on or off. Select

the time zone where you live.



Viewing the HD Connection Guide

The connection method for the best HD screen quality is displayed.



Enjoy your TV.

Press the ENTER

button.

Changing the Input Source

Source List

Use to select TV or an external input source such as a DVD player /

Blu-ray player / cable box / STB satellite receiver.

1. Press the button.SOURCE

2. Select a desired external input source.

■

TV / AV / Component / HDMI1/DVI / HDMI2

✎You can only choose external devices that are connected to the

TV. In the , connected inputs will be highlighted.Source List

How to use Edit Name

Edit Name lets you associate a device name to an input source. To

access , press the button in Edit Name TOOLS Source List. The

following selections appear under :Edit Name

■

VCR / DVD / Cable STB / Satellite STB / PVR STB / AV

Receiver / Game / Camcorder / PC / DVI PC / DVI / TV / IPTV

/ Blu-ray / HD DVD / DMA: Name the device connected to the

input jacks to make your input source selection easier.

✎When connecting a PC to the HDMI IN 1(DVI) port with HDMI

cable, you should set the T V to PC mode under .Edit Name

✎When connecting a PC to the HDMI IN 1(DVI) port with HDMI

to DVI cable, you should set the T V to mode under DVI PC Edit

Name.

✎When connecting an AV devices to the HDMI IN 1(DVI) port

with HDMI to DVI cable, you should set the TV to DVI mode

under Edit Name.

Information

You can see detailed information about the connected external

device.

HDMI OUT

AUDIO OUT

R-AU DIO-L

VIDEO OUT OPTICAL

ANT OUT

W R BR

R W R B RG

W YR

R W RY

R W

AUDIO IN

R-AU DIO-L

AUDIO OUT

R-AU DIO-L

COMPONENT OUT

PPYR B

DVI OUT

DVD / Home Theater

VCR Blu-ray player

Cable

Power Input

TV Rear Panel

TV Side Panel

VHF/UHF Antenna

Audio Device (1)

Using an Audio (Analog) Cable

Audio Device (2)

Using an Optical (Digital) Cable

AV Device (2)

Using an Audio/Video

AV Device (3)

Using a Component Cable

(up to 1080p)

Media Play

Using a USB Drive

Using a HDMI (to DVI) Cable

Blu-ray player / DVD / cable box /

sat box

AV Device (1)

Using a HDMI Cable (up to 1080p)

Digital Audio System

■

Contents On Time: When the is activated, you can turn on a

speciﬁc channel or play back contents such as photo or audio

ﬁles.

- TV/USB: Select or . (Make sure that an USB device is TV USB

connected to your TV.)

- Antenna: Displays the current antenna source.

- Channel: Select the desired channel.

- Music/Photo: Select the folder containing MP3/JPEG les on

the USB device.

✎The maximum displayed number of files, including sub

folders, in one folder of USB storage device is 2000.

✎The media may not be playing smoothly when using the

device lower than USB 2.0.

■

Repeat Once Everyday Mon~Fri Mon~Sat: Select , , , ,

Sat~Sun Manual or to set at you convenience. If you select

Manual, you can set up the day you want to activate the timer.

Other Features

Program Rating Lock

The feature automatically locks out Program Rating Lock

programs that are deemed inappropriate for children. The user

must enter a PIN (personal identication number) before any of the

Program Rating Lock restrictions are set up or changed.

✎Program Rating Lock is not available in HDMI or

Component mode.

✎The default PIN number of a new TV set is “0-0-0-0”.

■

Program Rating Lock: You can block rated TV Programs.

■

TV Parental Guidelines: You can block TV programs

depending on their rating. This function allows you to control

what your children are watching.

■

MPAA Rating: You can block movies depending on their MPAA

rating. The Motion Picture Association of America(MPAA) has

implemented a rating system that provides parents or guardians

with advanced information on which ﬁlms are appropriate for

children.

■

Canadian English: You can block TV programs depending on

their Anglophone Canadian.

■

Canadian French: You can block TV programs depending on

their French Canadian rating.

■

Downloadable U.S. Rating: Parental restriction information can

be used while watching DTV channels.

■

Change PIN: The Change PIN screen will appear. Choose any

4 digits for your PIN and enter it in . Re-enter Enter New PIN

the same 4 digits in Conﬁrm New PIN. When the Change

PIN screen disappears, press the OK button. The TV has

memorized your new PIN.

✎If you forget the PIN, press the remote-control buttons in

the following sequence, which resets the pin to “0-0-0-0” :

POWER POWER (off) → MUTE 8 →→→→ 2 4 (on)

Language

Set the menu language.

✎Choose between English, and Español Français.

Game Mode

When connecting to a game console such as PlayStation™ or

Xbox™, you can enjoy a more realistic gaming experience by

selecting the game menu.

✎Precautions and limitations for game mode

xTo disconnect the game console and connect another external

device, set Game Mode to Off in the setup menu.

xIf you display the T V menu in Game Mode, the screen shakes

slightly.

✎Game Mode is not available when the input source is set

to TV.

✎After connecting the game console, set Game Mode to On.

Unfortunately, you may notice reduced picture quality.

Caption

(On-Screen Text Messages)

■

Caption: You can switch the caption function on or off. If

captions are not available, they will not be displayed on the

screen.

✎The feature does not work in or Caption Component

HDMI mode.

■

Caption Mode: You can select the desired caption mode.

Default / CC1~CC4 / Text1~Text4: (analog channels only) The

Analog Caption function operates in either analog TV channel

mode or when a signal is supplied from an external device to

the TV. (Depending on the broadcasting signal, the Analog

Caption function may or may not work with digital channels.)

Default / Service1~Service6 / CC1~CC4 / Text1~Text4:

(digital channels only) The Digital Captions function works with

digital channels.

✎Service1~6 may not be available in digital caption mode

depending on the broadcast.

■

Digital Caption Options: (digital channels only)

Size: Options include Default, Small, Standard and Large. The

default is Standard.

Font Style: Options include Default and Styles 0 to 7. The

default is Style 0.

Foreground Color: Options include Default, White, Black, Red,

Green, Blue, Yellow, Magenta and Cyan.

You can change the color of the letter. The default is White.

Background Color: Options include Default, White, Black, Red,

Green, Blue, Yellow, Magenta and Cyan. You can change the

background color of the caption. The default is Black.

Foreground Opacity: This adjusts the opacity of text. Options

include Default, Transparent, Translucent, Solid and Flashing.

Background Opacity: This adjusts the opacity of the caption

background. Options include Default, Transparent, Translucent,

Solid and Flashing.

Return to Default: This option sets each Size, Font Style,

Foreground Color, Background Color, Foreground Opacity and

Background Opacity to its default.

✎Digital Caption Options are available only when Default

and can be selected in Service1 ~ Ser vice6 Caption

Mode.

✎The Foreground and Background cannot be set to have

the same color.

Melody

Set so that a melody plays when the TV is turned on or off.

✎The Melody does not play.

xWhen no sound is output from the TV because the MUTE

button has been pressed.

xWhen no sound is output from the TV because the volume has

been reduced to minimum with the VOL – button.

xWhen the TV is turned off by Sleep Timer function.

Auto Protection Time

■

Auto Protection Time (Off / 2 hours / 4 hours / 8 hours / 10

hours): If the screen remains idle with a still image for a certain

period of time deﬁned by the user, the screen saver is activated

to prevent the formation of ghost images on the screen.

Press to select additional channels (digital) being

broadcasted by the same station. For example,

to select channel ‘54-3’, press ‘54’, then press

‘-’ and ‘3’.

Returns to the previous channel.

Press to directly access to channels.

Turns the TV on and off.

Displays and selects the available video

sources.

Use these buttons in a speciﬁc feature.

P.SIZE: Lets you choose the picture size.

MTS: Press to choose stereo, mono or Separate Audio

Program (SAP broadcast).

CC: Controls the caption decoder.

Cuts off the sound temporarily.

Automatically shuts off the TV at a preset

time.

Displays the channel list on the screen.

Displays information on the TV screen.

Quickly select frequently used functions.

Selects the on-screen menu items and changes the

values seen on the menu.

Exit the menu.

Returns to the previous menu.

Turns the remote control light on or off. When

on, the buttons become illuminated for a

moment when pressed. (Using the remote

control with this button set to On will reduce

the battery usage time.)

Use these buttons according to the

direction on screen.

Changes channels.

Displays the main on-screen menu.

Views the Media Play.

Adjusts the volume.

MEDIA.P SLEEP

yThe side panel may differ depending on the model.

- 2 -- 1 -

- 6 -- 5 -

- 3 -

- 7 -

- 4 -

- 8 -

BN68-04572B-00

Display Modes (HDMI/DVI Input)

Optimal resolution is 1920 x 1080@60Hz.

Mode Resolution Horizontal

Frequency (KHz)

Vertical Frequency

(Hz)

Pixel Clock

Frequency (MHz)

Sync Polarity

(H / V)

IBM 640 x 350 31.469 70.086 25.175 +/-

720 x 400 31.469 70.087 28.322 -/+

MAC

640 x 480 35.000 66.667 30.240 -/-

832 x 624 49.726 74.551 57.284 -/-

1152 x 870 75.062 68.681 100.000 -/-

VESA DMT

640 x 480 31.469 59.940 25.175 -/-

640 x 480 37.861 72.809 31.500 -/-

640 x 480 37.500 75.000 31.500 -/-

800 x 600 +/+37.879 60.317 40.000

800 x 600 50.000 +/+48.077 72.188

800 x 600 +/+46.875 75.000 49.500

1024 x 768 48.363 60.004 65.000 -/-

1024 x 768 56.476 70.069 75.000 -/-

1024 x 768 60.023 75.029 78.750 +/+

1152 x 864 67.500 75.000 108.000 +/+

1280 x 720 45.000 74.250 60.000 +/+

1280 x 800 49.702 83.500 59.810 -/+

1280 x 1024 63.981 60.020 108.000 +/+

1280 x 1024 79.976 75.025 135.000 +/+

1366 x 768 47.712 59.790 85.500 +/+

1440 x 900 55.935 59.887 106.500 -/+

1600 x 900RB 60.000 60.000 108.000 +/+

1680 x 1050 -/+ 65.290 59.954 146.250

1920 x 1080 67.500 148.500 60.000 +/+

Installing batteries (Battery size: AAA)

✎NOTE

xUse the remote control within 23 feet from TV.

xBright light may affect the performance of the remote control.

Avoid use when nearby fluorescent lights or neon signs.

xThe Color and shape may vary depending on the model.

Channel Mode

Change the channel mode directly between and Added Channels

Favorite Channels.

✎The Favorite Channels is enabled only when you set Add to

Favorite.

Fine Tune

(analog channels only)

If the reception is clear, you do not have to ﬁne tune the channel, as

this is done automatically during the search and store operation. If the

signal is weak or distorted, ﬁne tune the channel manually.

✎Fine tuned channels that have been saved are marked with an

asterisk “*” on the right-hand side of the channel number in the

channel banner.

✎To reset the fine-tuning, select .Reset

Picture Menu

Mode

Select your preferred picture type.

✎When connecting a PC, you can only select and Entertain

Standard.

■

Dynamic: Suitable for a bright room.

■

Standard: Suitable for a normal environment.

■

Movie: Suitable for watching movies in a dark room.

■

Entertain: Suitable for watching movies and games.

✎Only available when connecting a PC.

Backlight / Contrast / Brightness / Sharpness /

Color / Tint (G/R)

Your television has several setting options for picture quality control.

✎When connecting a PC, you can only make changes to

Backlight, Contrast, Brightness and Sharpness

Advanced Settings

(available in mode)Standard / Movie

Compared to previous models, new Samsung TVs have a more

precise picture.

✎When connecting a PC, you can only make changes to Gamma

and White Balance.

■

Color Space (Auto / Native): Adjusts the range of colors available

to create the image.

■

White Balance: Adjusts the color temperature for a more natural

picture.

R-Offset / G-Offset / B-Offset: Adjusts each color’s (red, green,

blue) darkness.

R-Gain / G-Gain / B-Gain: Adjusts each color’s (red, green, blue)

brightness.

Reset White Balance: Resets the to it’s default settings.

■

Gamma: Adjusts the primary color intensity.

■

Dynamic Contrast (Off / Low / Medium / High): Adjusts the

screen contrast.

■

Black Tone (Off / Dark / Darker / Darkest): Select the black level

to adjust the screen depth.

■

Flesh Tone: Emphasize pink “esh tone”.

■

Motion Lighting (Off / On): Reduce power consumption by

brightness control adapted motion.

✎Available in Standard mode only.

Picture Options

✎When connecting a PC, you can only make changes to the

Color Tone HDMI Black Level, Size and .

■

Color Tone (Cool / Standard / Warm1 / Warm2)

✎Warm1 or will be deactivated when the picture mode Warm2

is .Dynamic

■

Size: Your cable box/satellite receiver may have its own set of

screen sizes as well. However, we highly recommend you use 16:9

mode most of the time.

16:9: Sets the picture to 16:9 wide mode.

Zoom1: Use for moderate magniﬁcation.

Zoom2: Use for a stronger magniﬁcation.

Wide Fit: Enlarges the aspect ratio of the picture to ﬁt the entire

screen.

4:3: Sets the picture to basic (4:3) mode.

✎Do not watch in 4:3 format for a long time. Traces of borders

displayed on the left, right and center of the screen may

cause image retention (screen burn) which are not covered

by the warranty.

Screen Fit (DTV): Displays the full image without any cut-off when

HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p)

signals are inputted.

✎HD (High Definition): 16:9 - 1080i/1080p (1920x1080), 720p

(1280x720)

✎Settings can be adjusted and stored for each external device

you have connected to an input on the TV.

✎Picture Sizes available by Input Source:

Input Source Picture Size

ATV, AV, Component (480i, 480p) 16:9, Zoom1 Zoom2 4:3, ,

DTV(1080i, 1080p), Component

(1080i, 1080p), HDMI (720p, 1080i,

1080p)

16:9, Wide Fit 4:3 Screen Fit, ,

■

Digital Noise Filter (Off / Low / Medium / High / Auto): If the

broadcast signal received by your TV is weak, you can activate the

Digital Noise Filter feature to reduce any static and ghosting that

may appear on the screen.

✎When the signal is weak, try other options until the best

picture is displayed.

■

HDMI Black Level (Normal / Low): Selects the black level on the

screen to adjust the screen depth.

✎Available only in HDMI mode (RGB signals).

■

Film Mode (Off / Auto): Sets the TV to automatically sense and

process ﬁlm signals from all sources and adjusts the picture for

optimum quality.

✎Available in ATV, DTV(interlace), AV, COMPONENT (480i /

1080i) and HDMI (480i / 1080i).

■

Auto Motion Plus (Off / Clear / Standard / Smooth / Custom /

Demo): Enhances motion in fast moving scenes.

✎The info screen on your TV displays the resolution and

frequency of the incoming video signal (60Hz). This displayed

frequency is not what the TV is displaying by using the Auto

Motion Plus function.

■

LED Motion Plus (Off / On): Removes drag from fast scenes with

a lot of movement to provide a clear picture.

Picture Reset

Resets your current picture mode to its default settings.

■

Reset Picture Mode: Returns all picture values in the currently

selected mode to the default settings.

Remote control sensor

TV Controller

Function menu

MEDIA.P

m R s

Return

xPTP device is not supported.

xIf an over-power warning message is displayed while you are

connecting or using a USB device, the device may not be

recognized or may malfunction.

xIf the TV has no input during the time set in , Auto Protection Time

the Screensaver will run.

xThe power-saving mode of some external hard disk drives may be

released automatically when your connect them to the TV.

xIf you use a USB extension cable, the TV may not recognize the

USB device or may not be able to read the ﬁles on the device.

xIf a USB device connected to the TV is not recognized, the list of

ﬁles on the device is corrupted, or a ﬁle in the list is not played,

connect the USB device to a PC, format the device, and check the

connection.

xIf a ﬁle you deleted from the PC is still found when you run Media

Play, use the “Empty the Recycle Bin” function on the PC to

permanently delete the ﬁle.

xPhotos only supports sequential jpeg format.

xThe scene search and thumbnail functions are not supported in the

Videos.

xIf the number of ﬁles and folders saved on a USB storage device is

approximately over 4000, the les and folders may not appear and

some folders may not be opened.

xThe maximum displayed number of ﬁles, including sub folders, in

►1/1

Movie 01.avi

E Pause

L Jump T Tools R Return

1. VideosPress the or button to select ◄ ► , then press the

ENTER

button in the menu.Media Play

2. Press the / / / button to select the desired video in the ﬁle ◄►▲▼

list.

3. Press the ENTER

button or



(Play) button.

- The selected file is displayed on the top with its playing time.

- If video time information is unknown, playing time and the

progress bar are not displayed.

- During video playback, you can search using the and ◄ ►

button.

✎In this mode, you can play movie clips contained in a game, but

you cannot play the game itself.

ySupported Subtitle Formats

- External

Name File extension

MPEG-4 timed text .ttxt

SAMI .smi

SubRip .srt

SubViewer .sub

Micro DVD .sub or .txt

SubStation Alpha .ssa

Advanced SubStation Alpha .ass

- Internal

Name Container Format

Xsub AVI Picture Format

SubStation Alpha Text FormatMKV

Advanced SubStation

Alpha MKV Text Format

SubRip MKV Text Format

MPEG-4 Timed text MP4 Text Format

ySupported Video Formats

File

Extension Container ResolutionVideo Codec Frame

rate(fps)

Bit

rate(Mbps)

Audio

Codec

*.mp4 MP4

DivX

3.11/4.x/5.1/6.0 1920x1080 6~30 30Mbps

MP3 /

ADPCM /

AAC

H264 1920x1080 6~30 30Mbps

AVC 1920x1080 6~30 30Mbps

MJPEG 640x480 6~30 10Mbps

*.avi

*.mkv

AVI,

MKV

DivX

3.11/4.x/5.1/6.0 1920x1080 6~30 30Mbps MP3 /

AC3 /

LPCM /

ADPCM

/ DTS

Core

MPEG4 SP / ASP 1920x1080 6~30 30Mbps

H264 1920x1080 6~30 30Mbps

MJPEG 640x480 6~30 10Mbps

*.asf

*.wmv ASF

DivX 3.11 / 4.x

/5.1 / 6.0 1920x1080 6~30 30Mbps MP3 /

AC3 /

LPCM /

ADPCM

/ WMA /

WMA Pro

MPEG4 SP / ASP 1920x1080 6~30 30Mbps

H.264 1920x1080 6~30 30Mbps

*.ts

*.trp

*.tp

*.m2ts

MPEG2 1920x1080 6~30 30Mbps AC3 /

AAC /

MP3 /

DD+ /

HE-AAC

H. 264 BP / MP

/ HP 1920x1080 6~30 30Mbps

*.dat

*.mpg

*.mpeg

*.vob

MPEG1 1920x1080 24/25/30 30Mbps AC3 /

MPEG /

LPCM /

AAC

MPEG2 1920x1080 24/25/30 30Mbps

H. 264 BP / MP

/ HP 1920x1080 6~30 30Mbps

*.3gp 3GPP MPEG4 SP / ASP 1920x1080 6~30 30Mbps MP3

H.264 1920x1080 6~30 30Mbps

*.v

*.swf

ﬂash

formats

H.264 1920x1080 6~30 30Mbps MP3

Sorenson H.263 1920x1080 6~30 30Mbps

Other Restrictions

yVideo content will not play, or not play correctly, if there is an error in the

content or the container.

ySound or video may not work if the contents have a standard bit rate/

frame rate above the compatible Frame/sec listed in the table above.

yIf the Index Table is in error, the Seek (Jump) function is not supported.

yThe menu may take longer to appear if the video’s bit rate exceeds

10Mbps.

yVideo content can not be played, if there are many contents in one ﬁle.

Video Decoder

Supports up to H.264, Level 4.1

H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not supported.

MPEG4 SP, ASP :

– Below 1280 x 720: 60 frame max

– Above 1280 x 720: 30 frame max

H.263 is not supported.

GMC is not support.

Audio Decoder

Supports up to WMA7, 8, 9 STD, 9 PRO, 10 PRO

WMA 9 PRO and WMA 10 PRO support 5.1 channel. (LBR mode of WMA

Pro is not supported)

WMA Lossless is not supported.

Caption on the TV menu is greyed out. • You cannot select Caption in the TV menu when watching content from a device connected via HDMI or

Component.

• Caption must be activated on the external device.

There is a plastic smell from the TV. This smell is normal and will dissipate over time.•

TV Signal Strength is unavailable in the

Self Diagnosis Test menu.

• This function is only available for digital channels from an Antenna / RF/Coax connection.

TV is tilted to the right or left side. • Remove the stand base from the TV and reassemble it.

The Channel menu is grey out

(unavailable).

• The Channel menu is only available when you select the TV source.

Your settings are lost after 30 minutes or

every time the TV is turned off.

• mode, it will reset audio and picture settings every 30 minutes. Please change from If TV is in the Store Demo

Store Demo Home Use Plug & Play mode to mode using the procedure. Press the button to select SOURCE

TV Setup mode, go to MENU → →Plug & Play → ENTER

You have intermittent loss of audio or

video.

• Check the cable connections and reconnect them.

• Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are ﬂexible

enough for long term use. If mounting the TV to the wall, we recommend using cables with 90 degree

connectors.

You see small particles when you look

closely at the edge of the frame of

the TV.

• This is part of the product’s design and is not a defect.

POP (TV’s internal banner ad) appears

on the screen.

• Select Home Use Plug & Play Plug & Play under mode. For details, refer to (Initial Setup).

✎This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may be a few bright or dark

pixels on the screen. These pixels will have no impact on the performance of the product.

✎Watch these troubleshooting on video at www.samsung.com/spsn.

✎Some functions and pictures shown in this manual are available on specific models only.

✎You can keep your TV as optimum condition to upgrade the latest firmware on web site (samsung.com → → Support Downloads) by USB.

Storage and Maintenance

✎If you attached some stickers on the TV screen, it remains some debris after removing the sticker. Please clean it to watch TV.

✎The exterior and screen of the product can get scratched during cleaning. Be sure to wipe the exterior and screen carefully using a soft cloth to prevent

scratches.

Do not spray water directly onto the product.

Any liquid that goes into the product may

cause a failure, ﬁre, or electric shock.

Clean the product with a soft cloth dampened

with in a small amount of water. Do not use a

ﬂammable liquid (e.g. benzene, thinners) or a

cleaning agent.

License

TheaterSound, SRS and the symbol are trademarks of SRS

Labs, Inc.

TheaterSound technology is incorporated under licence from

SRS Labs, Inc.

SRS TheaterSound™ provides the most immersive surround sound experience from the TVs built-in

speakers, while maintaining steady volume and delivering rich bass and clear dialog.

DivX Certiﬁed® to play DivX® video up to HD 1080p, including

premium content.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi

Corporation. This is an ofﬁcial DivX Certiﬁed® device that plays DivX video. Visit divx. com for more

information and software tools to convert your les into DivX videos. ABOUT DIVX VIDEO-ON-DEMAND:

This DivX Certiﬁed® device must be registered in order to play purchased DivX Video-on-Demand (VOD)

movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go

to vod. divx.com for more information on how to complete your registration. Covered by one or more of

the following U.S. patents : 7,295,673; 7,460,668; 7,515,710; 7,519,274 DivX®, DivX Certied® and

associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.

Manufactured under license from Dolby Laboratories. Dolby and

the double-D symbol are trademarks of Dolby Laboratories.

Manufactured under license under U.S. Patent Nos: 5,956,674;

5,974,380; 6,487,535 & other U.S. and worldwide patents issued

& pending. DTS, the Symbol, & DTS and the Symbol together

are registered trademarks & DTS 2.0+Digital Out is a trademark

of DTS, Inc. Product includes software. © DTS, Inc. All Rights

Reserved.

The terms HDMI and HDMI High-Deﬁnition Multimedia Interface,

and the HDMI Logo are trademarks or registered trademarks of

HDMI Licensing LLC in the United States and other countries.

Open Source License Notice

Open Source used in this product can be found on the following webpage. (http://opensource.samsung.

com) Open Source License Notice is written only English.

To send inquiries and requests for questions regarding open sources, contact Samsung via Email (oss.

request@samsung.com).

■ This product uses some software programs which are distributed under the Independent JPEG

Group.

ICU License - ICU 1.8.1 and later

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and

associated documentation ﬁles (the "Software"), to deal in the Software without restriction, including

without limitation the rights to use, copy, modify, merge, publish, distribute, and/or sell copies of the

Software, and to permit persons to whom the Software is furnished to do so, provided that the above

above copyright notice(s) and this permission notice appear in supporting documentation.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR

IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS

FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT

SHALL THE COPYRIGHT HOLDER OR HOLDERS INCLUDED IN THIS NOTICE BE LIABLE FOR

ANY CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES

WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF

CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION

WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

Except as contained in this notice, the name of a copyright holder shall not be used in advertising or

otherwise to promote the sale, use or other dealings in this Software without prior written authorization

of the copyright holder.

All trademarks and registered trademarks mentioned herein are the property of their respective owners.

There is poor color or brightness. Adjust the Picture options in the TV menu. (go to • Picture Mode / Color / Brightness / Sharpness)

• Adjust Energy Saving Energy Saving option in the TV menu. (go to MENU - Setup - Eco Solution - )

• Try resetting the picture to view the default picture setting. (go to - MENU Picture - Picture Reset)

There is a dotted line on the edge of

the screen.

• If the picture size is set to , change it to 16:9.Screen Fit

• Change cable/satellite box resolution.

The picture is black and white. • If you are using an AV composite input, connect the video cable (yellow) to the Green jack of component input 1

on the TV.

When changing channels, the picture

freezes or is distorted or delayed.

• If connected to a cable box, please try to reset it. (reconnect the AC cord and wait until the cable box reboots. It

may take up to 20 minutes)

• Set output resolution of the cable box to 1080i or 720p.

Sound Problem Sound TestFirst of all, please perform the to conﬁrm that your TV audio is properly operating.

(go to - MENU Support - Self Diagnosis - Sound Test)

If the audio is OK, the sound problem may caused by the source or signal.

There is no sound or the sound is too

low at maximum volume.

• Please check the volume of the device (Cable/Sat Box, DVD, Blu-ray, etc.) connected to your TV.

The picture is good but there is no

sound.

• If you are using an external device, check the device’s audio output option (ex. you may need to change your

cable box’s audio option to HDMI when you have a HDMI connected to your TV).

• Reboot the connected device by reconnecting the device’s power cable.

The speakers are making an

inappropriate noise.

• Check the cable connections. Make sure a video cable is not connected to an audio input.

• For Antenna or Cable connections, check the signal information. A weak signal may cause sound distortion.

• Perform the Sound Test as explained above.

No Picture, No Video

The TV will not turn on. Make sure the AC power cord is securely plugged into the wall outlet and the TV.•

• Make sure the wall outlet is working.

• Try pressing the button on the TV to make sure the problem is not the remote. POWER

If the TV turns on, refer to ‘Remote control does not work’ below.

The TV turns off automatically. Ensure the is set to in the menu.• Sleep Timer Off Time

• If your PC is connected to the TV, check your PC power settings.

• Make sure the AC power cord is plugged in securely to the wall outlet and the TV.

• When you are watching TV connected to an antenna or cable connection, the TV will turn off after 10 - 15 minutes

if there is no signal.

There is no picture/video. • Check the cable connections. (Remove and reconnect all cables connected to the TV and external devices).

• Set your external device’s (Cable/Sat Box, DVD, Blu-ray etc) video outputs to match the connections to the TV

input. For example, if an external device’s output is HDMI, it should be connected to an HDMI input on the TV.

• Make sure your connected devices are powered on.

• Be sure to select the TV’s correct source by pressing the button on the remote control.SOURCE

• Reboot the connected device by reconnecting the device’s power cable.

RF(Cable/Antenna) Connection

The TV is not receiving all channels. Make sure the coaxial cable is connected securely.•

• Please try Auto Program to add available channels to the channel list.

go to - then select and make sure the correct Cable TV signal type is set MENU Channel - Auto program Auto

in the menu. There are 3 options. (STD HRC IRC, and )

• Verify the antenna is positioned correctly.

No Caption on digital channels. • Check the Caption Setup menu. Try changing to Caption Mode Service 1 CC1.

• Some channels may not have caption data.

The picture is distorted: macroblock,

error, small block, dots, pixelization.

• Compression of video contents may cause picture distortion. Especially on fast moving pictures such as sports

and action movies.

• A weak signal can cause picture distortion. This is not a TV problem.

Others

Purple/green rolling horizontal bars and

buzzing noise from the TV speakers with

Component cable connection.

• Remove the left and right audio connections from the set-top-box. If the buzzing stops, this indicates that the set-

top-box has a grounding issue. Replace the Component video cables with an HDMI connection.

The picture will not display in full screen. • HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents.

• Black bars on the Top & Bottom will be shown on movies that have aspect ratios different from your TV.

• Adjust the picture size option on your external device or change the TV to full screen.

The remote control does not work. • Replace the remote control batteries with correct polarity (+/–).

• Clean the transmission window located on the top of the remote control.

• Try pointing the remote directly at the TV from 5~6 feet away.

The cable/set top box remote control

does not turn the TV on or off, or adjust

the volume.

• Program the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set top box user manual for

the SAMSUNG TV code.

A “ ” message Mode Not Supported

appears.

• Check the supported resolution of the TV and adjust the external device’s output resolution accordingly. Refer to

resolution settings in this manual.

Other Information

Installing the Wall Mount Kit

The wall mount kit (sold separately) allows you to mount the TV on

the wall.

For detailed information on installing the wall mount, see the

instructions provided with the wall mount items. Contact a

technician for assistance when installing the wall mount bracket.

Samsung Electronics is not responsible for any damage to the

product or injury to yourself or others if you elect to install the wall

mount on your own.

Wall Mount Kit Speciﬁcations (VESA)

✎The wall mount kit is not supplied, but sold separately.

Install your wall mount on a solid wall perpendicular to the ﬂoor.

When attaching to other building materials, please contact your

nearest dealer. If you install the TV on a ceiling or slanted wall, it

may fall and result in severe personal injury.

✎NOTE

xStandard dimensions for wall mount kits are shown in the table

below.

xWhen purchasing our wall mount kit, a detailed installation

manual and all parts necessary for assembly are provided.

xDo not use screws that do not comply with the VESA standard

screw specifications.

xDo not use screws that are longer than the standard dimension

or do not comply with the VESA standard screw specifications.

Screws that are too long may cause damage to the inside of the

TV set.

xFor wall mounts that do not comply with the VESA standard

screw specifications, the length of the screws may differ

depending on the wall mount specifications.

xDo not fasten the screws too firmly. This may damage the

product or cause the product to fall, leading to personal injury.

Samsung is not liable for these kinds of accidents.

xSamsung is not liable for product damage or personal injury

when a non-VESA or non-specified wall mount is used or the

consumer fails to follow the product installation instructions.

xDo not mount the TV at more than a 15 degree tilt.

xAlways have two people mount the TV on a wall.

Product

Family

TV size in

inches

VESA screw hole specs

(A * B) in millimeters

Standard

Screw Quantity

LED-TV

19~22 75 X 75

26 100 X 100

32~40 200 X 200 M6

46~60 400 X 400 M8

Do not install your Wall Mount Kit

while your TV is turned on. It may

result in personal injury due to electric

shock.

Securing the TV to the Wall

Caution: Pulling, pushing, or climbing onto the TV

may cause the TV to fall. In particular, ensure that your

children do not hang over or destabilize the TV; doing

so may cause the TV to tip over, resulting in serious

injuries or death. Follow all safety precautions provided

on the included Safety Flyer. For added stability, install

the anti-fall device for safety purposes, as follows.

To prevent the TV from falling

✎Since the necessary clamps, screws, and string are not

supplied, please purchase these additionally.

1. Drive the screws into the clamps and ﬁrmly fasten them onto the

wall. Make sure the screws are ﬁrmly ﬁxed into the wall.

2. Remove the screws from the back center of the TV, put the

screws into the clamps, and then fasten the screws onto the TV

again.

3. Connect the clamps ﬁxed onto the TV and the clamps ﬁxed onto

the wall with a strong cable and then tie the string tightly.

✎Verify all connections are properly secured. Periodically check

the connections for any sign of fatigue or failure. If you have

any doubt about the security of your connections, contact a

professional installer.

✎Install the T V close to the wall so that it does not fall.

✎It is safe to connect the string so that the clamps fixed on the

wall are equal to or lower than the clamps fixed on the TV.

Untie the string before moving the TV.

Kensington Lock

The Kensington Lock is not supplied by Samsung. It is a device

used to physically ﬁx the system when using it in a public place.

Refer to the manual provided with the Kensington Lock for

additional information on proper use.

✎Please find a “

” icon on the rear of the TV. The Kensington

slot is beside the “

” icon.

✎The position and color may differ depending on the model.

Assembling the Wire Holder stand

Troubleshooting

If the TV seems to have a problem, ﬁrst review this list of possible problems and solution. If none of these troubleshooting tips apply, visit

samsung.com, then click on Support, or call Samsung customer service at 1-800-SAMSUNG.

Problem Possible Solution

Flickering and Dimming If your Samsung Television is ﬂickering or dimming sporadically, you may need to disable some of its energy efﬁcient

features like the Eco Sensor or the Energy Saving feature. If you follow below step with your remote, you can turn

these features off or on.

yEnergy saving User Menu Setup Eco Solution Energy Saving : → → →

yEco Sensor : User Menu Setup Eco Solution Eco Sensor → → →

Component Connections /

Screen Color

If you ﬁnd that the color on your Samsung television’s screen is not correct or black and White, ﬁrst run a Self

Diagnosis on the TV to make sure there are no device issues.

ySelf Diagnosis User Menu Support Self Diagnosis Picture Test : → → →

yIf the test is ok, try making sure ;

yYour connections are all consistent. For example, if you’ve used the AV In jack on your TV, make sure you have

used the AV Out jack on your video source.

yTry making sure you have connected to the correct jacks. For example, if you use the Component jacks, labeled

Pb, Pr, and Y, to connect your TV and video source, make sure you have connected the blue Pb jack on the

video source to the blue Pb jack on the TV, the red Pr jack on the source to the red Pr jack on the TV.

Screen Brightness If you ﬁnd that the colors on your Samsung TV are correct but just a little too dark or bright, there are some settings

you should check before calling for a repair.

yBacklight, Contrast, Brightness, Sharpness, Color, Tint and so on. Go in to “Picture” on user Menu then try

adjusting options mentioned above.

Unwanted Powering off If your Samsung TV appears to turn off by itself, there may be an issue with either your Timer settings or your Eco

friendly No Signal Power Off feature.

First make sure you Sleep Timer is not accidentally set. The sleep timer allows you the comfort of falling asleep with

the TV still on but, turns it off after a certain period of time so as not to waste energy.

ySleep Timer : User Menu → → → Setup Time Sleep Timer

If the Sleep Timer is not activated, you may have engaged the No Signal Power Off or Auto Power Off feature.

yNo Signal Power Off : User Menu → → → Setup Eco Solution No Signal Power

yAuto Power Off : User Menu → → → Setup Eco Solution Auto Power Off

Trouble Powering On Before Turn on check red light on the right or left bottom of your TV. Press power on button on TV or remote

and it will blink about 5 times before turning on.

If you ﬁnd that you are having trouble powering on your Samsung television, there are a number of things to check

before making a call to the service department.

yIf you happen to be using the TV as a monitor and the stand-by light only blinks for a few seconds when you

press the power button, your PC is in sleep mode. To take your PC out of sleep mode, press a key on your

keyboard or move the mouse. Then try turning your TV on.

If you’re sure your power cord, remote control, and PC are functioning properly, you may be having a cable issue. If

you have a cable or satellite box, your TV may appear to be off because the cable or satellite box is not outputting a

signal. To test the signal output of your cable or satellite box, press the guide or info button on the cable or satellite

box remote control. If the screen displays the guide or info data, the problem is caused by the box.

Stand Assembly • If you have any trouble to assemble the stand though you refer to “Install the Stand” mentioned at separate guide.

Cannot ﬁnd channel • Re-run plug and play.

Poor picture Picture TestFirst, perform the and to see if your TV is properly displaying the test image.

Go to MENU - Support - Self Diagnosis - Picture Test

If the test image is properly displayed, the poor picture may be caused by the source or signal.

The TV image does not look as good as

it did in the store.

• If you have an analog cable/satellite box, upgrade to a digital set top box. Use HDMI or Component cables to

deliver HD (high deﬁnition) picture quality.

• Cable/Satellite subscribers: Try HD channels from the channel line up.

• Air/Cable Antenna connection: Try HD channels after performing Auto program.

✎Many HD channels are up scaled from SD(Standard Definition) contents.

• Adjust the Cable/Set top box video output resolution to 1080i or 720p.

The picture is distorted: macroblock

error, small block, dots, pixelization.

• Compression of video contents may cause picture distortion, especially on fast moving pictures such as sports

and action movies.

• A weak signal can cause picture distortion. This is not a TV problem.

• Mobile phones used close to the TV (within 3.3ft) may cause noise in the picture on analog and digital channels.

Color is wrong or missing. If you’re using a component connection, make sure the component cables are connected to the correct jacks. •

Incorrect or loose connections may cause color problems or a blank screen.

- 10 -- 9 -

- 14-- 13 -

- 11 -

- 15 -

- 12 -

- 16 -

Eco Solution

■

Energy Saving (Off / Low / Medium / High / Picture Off) :

This adjust the brightness of the TV in order to reduce power

consumption. If you select Picture Off, the screen is turned

off, but the sound remains on. Press any button except volume

button to turn on the screen.

■

Eco Sensor (Off / On): To enhance your power savings; the

picture settings will automatically adapt to the light in the room.

✎If you adjust the , the Backlight Eco Sensor will be set to

Off.

Min. Backlight Eco Sensor On: When is , the minimum screen

brightness can be adjusted manually.

✎If is Eco Sensor On, the display brightness may change

(become slightly darker in most cases) depending on the

surrounding light intensity.

■

No Signal Power Off (Off / 15 min. / 30 min. / 60 min.): Sets

how quickly the TV switches to standby mode, if no picture is

being received.

✎Disabled when the PC is in power saving mode.

■

Auto Power Off (Off / On): The TV will be automatically turned

off when no user operation is received for 4 hours.

Support Menu

Self Diagnosis

■

Picture Test: Use to check for picture problems. If the problem

continues to occur, check the color pattern.

■

Sound Test: Use the built-in melody sound to check for sound

problems.

■

Signal Strength: (digital channels only) An HD channel’s

reception quality is either perfect or the channels are unavailable.

Adjust your antenna to increase signal strength.

■

Reset: Reset all settings to the factory defaults.

✎The PIN input screen appears before the setup screen.

✎Enter your 4-digit PIN. Change the PIN using the Change

PIN option.

Software Upgrade

Software Upgrade can be performed by downloading the latest

ﬁrmware from samsung.com to a USB memory device.

HD Connection Guide

Refer to this information when connecting external devices to the

TV.

Contact Samsung

View this information when your TV does not work properly or

when you want to upgrade the software. You can nd information

regarding our call centers and how to download products and

software.

Media Play

Enjoy photos, music and/or movie ﬁles saved on a

USB Mass Storage Class (MSC) device.

MEDIA.P

Connecting a USB Device

1. Turn on your TV.

2. Connect a USB device containing photo, music and/or movie

ﬁles to the jack on the side of the TV.USB

3. When USB is connected to the TV, you can select Media Play

(USB) in Application menu.

Using the Media Play Menu

SUM

▒

Change Device

E R Enter Return

Media Play

Videos

1. Press the MENU button. Press the or button to select ▲ ▼

Application, then press the ENTER

button.

2. Media Play (USB)Press the or button to select ▲ ▼ , then

press the ENTER

button.

3. Videos, Music, Press the or button to select an icon (◄ ►

Photos, Settings), then press the ENTER

button.

✎It might not work properly with unlicensed multimedia files.

✎Need-to-Know List before using Media Play (USB)

xThe file system supports FAT16, FAT32 and NTFS.

xCertain types of USB Digital camera and audio devices may not

be compatible with this TV.

xMedia Play only supports USB Mass Storage Class (MSC)

devices. MSC is a Mass Storage Class Bulk-Only Transport

device. Examples of MSC are Thumb drives and Flash Card

Readers. Devices should be connected directly to the TV’s USB

port. USB HDD is not supported.

xBefore connecting your device to the TV, please back up your

files to prevent them from damage or loss of data. SAMSUNG is

not responsible for any data file damage or data loss.

xA USB device that requires high power (more than 0.5A) may not

be supported.

xDo not disconnect the USB device while it is loading.

xThe higher the resolution of the image, the longer it takes to

display on the screen.

xIf a ﬁle is corrupted or the TV does not support the ﬁle type, the

“Not Supported File Format” message appears.

xThe TV cannot play MP3 les with DRM that have been

downloaded from a for-pay site. Digital Rights Management

(DRM) is a technology that supports the creation, distribution,

and management of digital content in an integrated and

comprehensive way, including protecting the rights and interests

of content providers, preventing illegal copying of contents, and

managing billings and settlements.

Speciﬁcations

Environmental

Considerations

Operating Temperature

Operating Humidity

Storage Temperature

Storage Humidity

50°F to 104°F (10°C to 40°C)

10% to 80%, non-condensing

-4°F to 113°F (-20°C to 45°C )

5% to 95%, non-condensing

Model Name UN40EH6000

UN40EH6050

UN46EH6000

UN46EH6050

UN50EH6000

UN50EH6050

UN55EH6000

UN55EH6050

UN60EH6000

UN60EH6050

UN65EH6000

UN65EH6050

Display Resolution 1920 x 1080

Screen Size

(Diagonal)

40" Class

(40.0" measured

diagonally)

46" Class

(45.9" measured

diagonally)

50" Class

(49.5" measured

diagonally)

55" Class

(54.6" measured

diagonally)

60" Class

(60.0" measured

diagonally)

65" Class

(64.5" measured

diagonally)

Sound

Output 10W x 2

Dimensions

(W x D x H)

Body

With stand

36.5 X 3.6 X 21.8 inches

(927.6 X 93.3 X 555.5

(mm))

36.5 X 8.9 X 23.8 inches

(927.6 X 227.6 X 606.5

(mm))

41.7 X 3.7 X 24.7 inches

(1059.8 X 94.3 X 629.4

(mm))

41.7 X 8.9 X 26.7 inches

(1059.8 X 227.6 X 680.3

(mm))

44.7 X 3.7 X 26.5 inches

(1137.6 X 94.5 X 673.4

(mm))

44.7 X 8.9 X 28.5 inches

(1137.6 X 227.6 X 725.0

(mm))

49.2 X 3.7 X 28.9 inches

(1250.6 X 94.3 X 735.7

(mm))

49.2 X 8.9 X 31.0 inches

(1250.6 X 227.6 X 789.2

(mm))

54.0 X 3.7 X 31.7 inches

(1374.1 X 94.3 X 807.0

(mm))

54.0 X 12.9 X 33.8 inches

(1374.1 X 329.8 X 859.0

(mm))

58.4 X 3.8 X 34.4 inches

(1484.5 X 96.3 X 873.8

(mm))

58.4 X 12.9 X 36.4 inches

(1484.5 X 329.8 X 926.5

(mm))

Weight

Without Stand

With Stand

20.2 Ibs (9.2 kg)

24.6 Ibs (11.2 kg)

26.4 Ibs (12.0 kg)

30.8 Ibs (14.0 kg)

34.3 Ibs (15.6 kg)

40.1 Ibs (18.2 kg)

45.6 Ibs (20.7 kg)

51.3 Ibs (23.3 kg)

54.6 Ibs (24.8 kg)

60.4 Ibs (27.4 kg)

62.3 Ibs (28.3 kg)

71.6 Ibs (32.5 kg)

✎Design and specifications are subject to change without prior notice.

✎This device is a Class B digital apparatus.

✎For information about power supply, and more about power consumption, refer to the label attached to the

product.

✎Typical power consumption is measured according to Energy Star Program requirements for Televisions.

✎Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our

website: www.samsung.com/recyclingdirect or call, (877) 278-0799.

■

JACK PANEL DETAIL / REAR VIEW

(Unit:

inches

)

Model name 1 2 3 4 5 6

UN40EH6000 / UN40EH6050 9.6 5.8 5.8 24.1 7.8 7.8

UN46EH6000 / UN46EH6050 11.6 5.2 7.3 29.8 15.7 15.7

UN50EH6000 / UN50EH6050 12.5 31.3 15.7 15.76.8 8.1

UN55EH6000 / UN55EH6050 15.5 6.1 7.6 36.4 15.7 15.7

UN60EH6000 / UN60EH6050 16.7 38.5 15.7 15.78.6 8.8

UN65EH6000 / UN65EH6050 19.0 9.510.3 41.8 15.7 15.7

NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions

prior to performing installation of your TV. Not responsible for typographical or printed errors.

Music

3/15

I Love you

Jhon

Music 1

No Singer

Music 2

No Singer

Music 3

No Singer

Music 4

No Singer

Music 5

No Singer

I Love uYo

Jhon

1st Album

Pop

2010

4.2MB

01:10 / 04:02

SUM

E L T Pause Jump Tools R Return

Playlist

1. MusicPress the or button to select ◄ ► , then press the

ENTER

button in the menu.Media Play

2. Press the / / / button to select the desired Music in the ﬁle ◄►▲▼

list.

3. Press the ENTER

button or (Play) button.

✎During music playback, you can search using the and ◄ ►

button.

✎



(REW) and

(FF) buttons do not function during play.

✎Only displays the files with MP3 and PCM file extension. Other

file extensions are not displayed, even if they are saved on the

same USB device.

✎If the sound is abnormal when playing MP3 files, adjust the

Equalizer in the Sound menu. (An over-modulated MP3 file

may cause a sound problem.)

Photos

Image1024.jpg 1024x768 2011/10/24 3/15

E L T Pause Previous/Next Tools R Return

Normal

1. PhotosPress the or button to select ◄ ► , then press the

ENTER

button in the menu.Media Play

2. Press the / / / button to select the desired photo in the ﬁle ◄►▲▼

list.

3. Press the ENTER

button or



(Play) button.

✎NOTE

xWhile a photo list is displayed, press the



(Play) / ENTER

button on the remote control to start the slide show.

xAll files in the file list section will be displayed in the slide show.

xDuring the slide show, files are displayed in order.

xDuring the slide show, you can adjust the slide show speed using

( ) (FF) button.π) (REW) or (µ

xYou can move to other file using ◄ ► or button.

ySupported Photo Formats

Image Photo Resolution

JPEG Base-line 15360 x 8704

Progressive 1024 x 768

Other Restrictions

yCMYK, YCCK Color space JPEG are not supported.

Playing Multiple Files

■

Playing selected video/music/photo ﬁles

1. Press the Yellow button in the le list to select the desired le.

2. Repeat the above operation to select multiple les.

✎NOTE

xThe

mark appears to the left of the selected files.

xTo cancel a selection, press the Yellow button again.

xTo deselect all selected files, press the TOOLS button and select

Deselect All.

3. Press the button, and then select TOOLS Play Selected

Contents.

■

Playing the video/music/photo ﬁle group

1. While a ﬁle list is displayed, move to any ﬁle in desired group.

2. Play FolderPress the TOOLS button, and then select .

Media Play - Additional Functions

■

Videos/Music/Photos Play Option menus

When playing a ﬁle, press the button.TOOLS

Category Operation Videos Music Photos

Title You can move the other le directly.

Repeat Mode You can play movie and music les

repeatedly.

c c

Picture Size You can adjust the picture size to your

preference.

Picture Mode You can adjust the picture setting.

c c

Auto Motion

Plus

You can enhance motion in fast moving

scenes.

Sound Mode You can adjust the sound setting.

c c c

Subtile Setting

You can play the video with Subtitles. This

function only works if the subtitles are the

same ﬁle name as the video.

Audio Format You can select the digital audio output

format.

Audio

Language

You can change the audio language if the

video has more than one language.

Stop Slide

Show /

Start Slide

Show

You can start or stop a Slide Show.

Slide Show

Speed

You can select the slide show speed

during the slide show.

Background

Music

You can set and select background music

when watching a Slide Show.

Zoom You can zoom into images in full screen

mode.

Rotate You can rotate images in full screen

mode.

Information You can see detailed information about

the played ﬁle.

c c c

Settings

Using the Setup Menu

■

DivX® Video On Demand : Shows the registration code

authorized for the TV. If you connect to the DivX web site and

activation ﬁle. Once you play it using Media Play, the registration is

completed.

✎For more information on DivX® VOD, visit “http://vod.divx.

com”.

■

Information: Select to view information on the connected device.

Product specificaties

Merk:	Samsung
Categorie:	Televisie
Model:	UN65EH6000
Kleur van het product:	Zwart
Gewicht verpakking:	40279 g
Breedte verpakking:	1826.2 mm
Diepte verpakking:	238.7 mm
Hoogte verpakking:	1003.3 mm
Gebruikershandleiding:	Ja
Bluetooth:	Nee
Aan/uitschakelaar:	Ja
Beeldschermdiagonaal:	65 "
Resolutie:	1920 x 1080 Pixels
Oorspronkelijke beeldverhouding:	16:9
Ethernet LAN:	Nee
Ondersteunde video-modi:	1080p
Garantiekaart:	Ja
Aantal USB 2.0-poorten:	1
Aantal HDMI-poorten:	2
Componentingang video (YPbPr/YCbCr):	1
DVI-poort:	Nee
Smart TV:	Ja
Ingebouwde luidsprekers:	Ja
Gemiddeld vermogen:	20 W
Stroomverbruik (in standby):	0.3 W
Vermogensverbruik (max):	190 W
Aantal luidsprekers:	2
Certificering:	ENERGY STAR 6.0
HD type:	Full HD
Ondersteunde grafische resoluties:	1920 x 1080 (HD 1080)
VESA-montage:	Ja
Paneelmontage-interface:	400 x 400 mm
Duurzaamheidscertificaten:	ENERGY STAR
Diepte ( zonder voet ):	96.5 mm
Hoogte (zonder voet ):	873.7 mm
Breedte ( zonder voet ):	1483.3 mm
Gewicht (zonder voet):	28304 g
PC-ingang (D-Sub):	Nee
Digitale audio, optische uitgang:	1
Soort tuner:	Analoog & digitaal
Ingebouwde audio decoders:	Dolby Digital
Breedte apparaat (met standaard):	1483.3 mm
Diepte apparaat (met standaard):	330.2 mm
Hoogte apparaat (met standaard):	927 mm
Gewicht (met standaard):	32522 g
Bureaustandaard:	Ja
Beeldverwerkingstechnologie:	Samsung Wide Color Enhancer
Automatische volumeregelaar:	Ja
On Screen Display (OSD):	Ja
Motion interpolation technologie:	CMR (Clear Motion Rate)
Technologie voor decoderen van geluid:	Dolby Digital Plus, Dolby Digital Pulse
Afstandsbediening inbegrepen:	Ja
Wifi:	Nee
AC-ingangsspanning:	110 - 120 V
AC-ingangsfrequentie:	60 Hz
Stroomverbruik (typisch):	90 W
Batterijen inbegrepen:	Ja