Sachtler System Ace L GS CF Handleiding

Sachtler Statief System Ace L GS CF

Lees hieronder de 📖 handleiding in het Nederlandse voor Sachtler System Ace L GS CF (6 pagina's) in de categorie Statief. Deze handleiding was nuttig voor 37 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/6

Ace L MS CF

1011

Ace L GS CF

1012

Fluid Head and

Tripod

Manual

Ace L MS CF

79 to 170.5 cm

(31.1 – 67.1 in.)

Ace L GS CF

57 to 173 cm

(22.4 – 68.1 in.)

Spike

Pan bar

16 mm (0.6 in.)

Pan bar

374 mm (14.7 in.)

Illuminated level bubble

CR1225

139 mm (5.5 in.)

140 mm (5.5 in.)

154 mm (6 in.)

1.7 kg (3.7 lbs)

6 kg (13.2 lbs)

7+0

+90°/-75°

-30°C/+60°C

(-22°F to +140°F)

HEAD

SYSTEM

Bowl

75 mm

Ace L MS CF

3.9 kg (8.7 lbs)

Ace L GS CF

4.1 kg (9 lbs)

104 mm

(4.1 in.)

3+0

BRAZIL

Vitec Brazil Tecnologies Ltda

Rua Quintana, 950 – cj. 32

Brooklin

São Paulo, 04569-011

Brazil

Tel. +55 11 5102 4001

Fax +55 11 5103 1164

CHINA

Vitec China

Rm 706, Tower B

Derun Building

YongAn Dongli A No. 8

Jianwai Ave, Chaoyang District

100022 Beijing, China

Tel. +86 10 8528 8748

Fax +86 10 8528 8749

FRANCE

Vitec Videocom

171 Avenue des Grésillons

92635 Gennevilliers CEDEX

France

Tel. +33 8 20 82 13 36

Fax +33 8 25 82 61 81

GERMANY

Vitec Videocom GmbH

Headquarters

Erfurter Straße 16

85386 Eching

Germany

Tel. +49 89 321 58 200

Fax +49 89 321 58 227

Planiger Straße 34

55543 Bad Kreuznach

Germany

Tel. +49 671 483 43 30

Fax +49 671 483 43 50

JAPAN

Sachtler Japan

P.A. Bldg. 4F

3-12-6 Aobadai

Meguro-ku, Tokyo 153-0042

Japan

Tel. +81 3 5457 1381

Fax +81 3 5457 1382

SINGAPORE

Vitec Videocom Pte Ltd.

6 New Industrial Road

#02-02 Hoe Huat Industrial Building

Singapore 536199

Tel. +65 629 757 76

Fax +65 629 757 78

Vitec Videocom Ltd.

William Vinten Building

Western Way

Bury St Edmunds

Suffolk IP33 3TB

Tel. +44 (0)1284 776 700

Fax +44 (0)1284 750 560

USA

Vitec Videocom Inc.

709 Executive Blvd

Valley Cottage

New York 10989

USA

Tel. +1 845 268 0100

Fax +1 845 268 9324 Ace L MS

Ace L GS

Watch Ace tutorials

and videos

6 8 9

711

‘0’

‘CLICK’

Max. 10 kg

(22 lbs) ‘0’

The warranty expires if:

(a) The fluid head was operated improperly or not in

line with the specified technical data.

(b) The fluid head housing was opened by

unauthorised personnel.

Sachtler reserve the right to make changes to

product design and performance as technology

advances. Please register your product for an

extended warranty period at www.sachtler.com

A garantia termina se:

(a) A cabeça fluida foi operada inadequadamente ou

não de acordo com os dados técnicos especificados.

(b) O invólucro da cabeça fluida for aberto por

pessoal não autorizado.

A Sachtler se reserva o direito de fazer modificações

no projeto e no desempenho do produto à medida

que a tecnologia avança. Registre seu produto para

um período de garantia mais longo em

www.sachtler.com.























www.sachtler.com.

󱄑󲏟󰙰󺔾󺕌

󱩨󰲷󰑓󰡿󱣬󱀾󰧣󲁐󰤧

󱇨󲙢󺔎󳁦󴣿󲣃󰤧󱁼󰶾󰩽󺔎

󱩨󲣃󴛡󱁶󳛞󰪧󱂖󲣃󰣧󰎳

󵋭󺔎

󲚧󰤧󱁼󱀠󰸤󳣐󴳯󴳒󰖍

󳩰󵌘󴘲󱀠󲣃󱂖󺔎󴴨󺔌

󺔌󰙂󲣃󱥐

󰎜󵰓󱁥󺔎

Die Gewährleistung erlischt in folgenden Fällen:

(a) Wenn der Fluidkopf falsch oder nicht gemäß den

angegebenen technischen Daten benutzt wurde.

(b) Wenn das Gehäuse des Fluidkopfes durch nicht

autorisierte Personen geöffnet wird.

Sachtler behält sich das Recht vor, Änderungen am

Produktdesign und der Spezifikation vorzunehmen,

wenn technologische Fortschritte dies ermöglichen.

Bitte registrieren Sie Ihr Produkt für eine

Verlängerung der Garantiedauer unter

www.sachtler.com.

La garantie expire si :

(a) La tête fluide a été utilisée de manière impropre

ou non conforme aux caractéristiques techniques

spécifiées.

(b) Le carter de la tête fluide a été ouvert par une

personne non autorisée.

Sachtler se réserve le droit de modifier la conception

et les performances du produit au gré des progrès

techniques. Veuillez enregistrer votre produit sous

www.sachtler.com pour bénéficier d'une période de

garantie étendue.

La garantía deja de tener validez si:

(a) la cabeza fluida es sometida a un uso indebido o

no conforme a los datos técnicos especificados.

(b) se abre la carcasa de la cabeza fluida por parte

de personal no autorizado.

Sachtler se reserva el derecho de realizar

modificaciones en materia de diseño y rendimiento

del producto a medida que la tecnología avanza.

Registre su producto si desea disfrutar de un período

de garantía ampliada www.sachtler.com.

)a(

)b(

Sachtler

com.sachtler.www

Adjust the counterbalance: tilt the fluid head forwards

and backwards through the horizontal position to

engage the spring at the selected step.

NOTE: If the camera does not remain in position

hands-free, lock the vertical brake and adjust the

position of the camera. If the camera falls forward,

reposition the camera to the rear of the head. If the

camera falls backward, reposition the camera to the

front of the head.

Setting drag

The fluid head has 3 drag levels horizontally and

vertically. Drag is turned off when the 0 setting is

selected. To adjust the drag, rotate the drag ring to

the required setting while slowly moving the fluid

head vertically or horizontally until the drag

mechanism engages.

Brakes

To prevent the fluid head from moving, lock the

vertical and horizontal brakes. Do not use the brakes

to apply drag.

REMOVING THE CAMERA

Lock the brakes. Loosen the camera plate clamping

screw. Press the camera plate release button whilst

sliding the camera to the rear of the head.

TRANSPORT AND STORAGE

Open the vertical and horizontal brakes and set the

balance and drag settings to maximum.

Adjust the position of the pan bar handle.

Loosen the spreader locks and reduce the tripod

footprint by pulling the spreader ring vertically.

Hold the fluid head with one hand. Loosen all the

tripod leg locks on the upper and lower stages.

Carefully collapse the tripod legs.

Tighten the leg locks and close the tripod.

Clip the two leg ties onto the leg tubes to prevent the

tripod from opening during transport or storage.

REPLACING THE BATTERY

To replace the battery, prise out the battery

compartment and remove the old battery from the

battery holder (using tweezers).

Insert the new battery and replace the battery

compartment.

TRIPOD SETUP

Adjust the pan bar position. Loosen the pan bar

clamp and adjust the angle of the pan bar handle.

Tighten the pan bar clamp.

Open the tripod

Hold the fluid head with one hand. Loosen the tripod

lower-stage leg locks and extend the legs to the

required height.

Tighten the leg locks.

Set the tripod footprint to suit the shooting

environment. Loosen the spreader locks and adjust

to the required length.

Tighten the spreader clamps.

Loosen the tripod upper-stage leg locks and extend

the legs to the required height.

Tighten the leg locks.

NOTE: In windy conditions, attach a weight

(max.10 kg/22 lbs) to the tripod tie-down to stabilise

the tripod.

FLUID HEAD SETUP

Levelling

Loosen the bowl clamp. Level the fluid head using

the level bubble. Press the button to illuminate the

level bubble if required.

Tighten the bowl clamp.

Mounting the camera

Lock the horizontal and vertical brakes.

Loosen the camera plate clamping screw. Pull the

camera plate to the rear of the fluid head whilst

pressing the red release button.

Attach the camera plate to the camera using the

camera screws and pin supplied. Spare camera

screws can be stored under the platform.

NOTE: Some cameras, incl. DSLRs, do not require

the pin. Remove the 1/4 in. screw to release the pin

plate.

Hold the camera with one hand. Insert the camera

plate onto the rear of the platform. Slide forwards

until the locking button secures the camera plate

onto the platform.

Position the camera C of G over the axis of the fluid

head. Tighten the clamping screw to secure the

camera.

Setting the counterbalance

CAUTION! Hold the pan bar to prevent the camera

from falling away.

Lock the vertical brake. Set the vertical drag and the

counterbalance to 0.

Open the vertical brake. Holding the pan bar, adjust

the counterbalance setting, until the camera remains

in position hands-free.

123

5 6

8 9

























































































































































































































123

5 6

8 9 12

Product specificaties

Merk:	Sachtler
Categorie:	Statief
Model:	System Ace L GS CF
Kleur van het product:	Zwart
Gewicht:	4100 g
Hoogte (min):	570 mm
Hoogte (max):	1730 mm
Maximale gewichtscapaciteit:	6 kg
Materiaal:	Koolstofvezel
Bedoeld voor:	Digitaal/filmcamera
Lengte wanneer opgevouwen:	870 mm
Aantal benen/poten:	3 poot/poten