Ryobi RHT500R Handleiding

Ryobi Heggenschaar RHT500R

Lees hieronder de 📖 handleiding in het Nederlandse voor Ryobi RHT500R (9 pagina's) in de categorie Heggenschaar. Deze handleiding was nuttig voor 53 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/9

ELECTRIC HEDGE TRIMMER

OPERATOR’S MANUAL (Original Instructions)

RHT500R/RHT600RL

Important! It is essential that you read the instructions in this manual before

operating this machine.

RHT500R

RHT600RL

410

Fig.4

Fig.8

RHT500R

RHT600RL

ENGLISH

Your hedg e trimm er has been engine ered and

manufactured to Ryobi’s high standard for dependability,

ease of operation, and operator safety. When properly

cared for, it will give you years of rugged, trouble-free

performance.

Thank you for buying a Ryobi product.

WARNING: To reduce the risk of injury, the user

must read and understand the operator’s manual

before using this product.

GENERAL POWER TOOL SAFETY RULES

WARNING:

Read all safety warnings and all instructions.

Failure to follow the warnings and instructions

may result in electric shock, fire and serious

injury.

Save all warning s and in structions for future

reference.

The term “power tool” in the warnings refers to your

mains-operated corded power tool or battery-operated

(cordless) power tool.

WORK AREA SAFETY

n Keep work area clean and well lit. Cluttered or dark

areas invite accidents.

n Do not opera te po wer tools in expl osi ve

atmosphere s, su ch as in the pres ence of

flammable liquids, gases or dust. Power tools

create sparks which may ignite the dust or fumes.

n Keep children and bystanders away while

operating a power tool. Distractions can cause you

to lose control.

ELECTRICAL SAFETY

n Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodified plugs and matching outlets will

reduce risk of electric shock.

n Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

n Do not expose power t ools t o rain or wet

conditions. Water entering a power tool will increase

the risk of electric shock.

n Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts. Damaged or entangled cords increase

the risk of electric shock.

n When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of

a cord suitable for outdoor use reduces the risk of

electric shock.

n If operating a power tool in a damp location is

unavoidable, use a residual current device (RCD)

protected supply. Use of an RCD reduces the risk of

electric shock.

PERSONAL SAFETY

n Stay alert, watch what you are doing and use

common sense when operating a power tool. Do

not use a power tool while you are tired or under

the influence of drugs, alcohol or medication. A

moment of inattention while operating power tools

may result in serious personal injury.

n Use personal protective equipment. Always wear

eye protection. Protective equipment such as dust

mask, non-skid safety shoes hard hat, or hearing

protection used for appropriate conditions will reduce

personal injuries.

n Prevent unintent ional starting. Ensure the

switch is in the off-position before connecting

to power source and /or battery pack, picking up

or carrying the tool. Carrying power tools with your

finger on the switch or energising power tools that

have the switch on invites accidents.

n Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key left

attached to a rotating part of the power tool may

result in personal injury.

n Do no t overreach. Keep proper footing and

balance at all times. This enables better control of

the power tool in unexpected situations.

n Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing and gloves

away from moving parts. Loose clothes, jewellery

or long hair can be caught in moving parts.

n If devices are provided for the connection of dust

extraction and collection facilities, ensure these

are connected and properly used. Use of dust

collection device can reduce dust-related hazards.

POWER TOOL USE AND CARE

n Do not force the power tool. Use the correct

power tool for your application. The correct power

tool will do the job better and safer at the rate for

which it was designed.

n Do not use the power tool if the switch does not

turn it on and off. Any power tool that cannot be

controlled with the switch is dangerous and must be

repaired.

n Disconnect the plug from the power source

befo re making any adjustments, chan ging

accessories, or storing power tools. Such

preventative safety measures reduce the risk of

starting the power tool accidentally.

Product specificaties

Merk:	Ryobi
Categorie:	Heggenschaar
Model:	RHT500R
Kleur van het product:	Black, Yellow
Gewicht:	3400 g
Geluidsniveau:	99 dB
Stroombron:	AC
AC-ingangsspanning:	220-240 V
AC-ingangsfrequentie:	50 - 60 Hz
Onbelast toerental aantal slagen:	1500 spm
Motorvermogen:	500 W
Lemmetlengte:	550 mm
Bladtype:	Dubbel blad