Rover Mulch 'N Catch Handleiding

Rover Grasmaaier Mulch 'N Catch

Lees hieronder de 📖 handleiding in het Nederlandse voor Rover Mulch 'N Catch (8 pagina's) in de categorie Grasmaaier. Deze handleiding was nuttig voor 87 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/8

Mulch 'N Catch

Convertible Rotary Lawnmower

Mower Models - 35m, 75m

50m, 51m, 60m, 61m

80m

WARNING

Before changing any

component or adjustments

(where applicable):

• Release the operator

presence control.

• Disconnect the spark plug

wire from the spark plug.

• Blades and moving parts

must be stopped.

Congratulations on your purchase of a Rover Mulch ‘N Catch mower with the exclusive Patent

Pending Rover Vari-Tilt System. The Rover Mulch ‘N Catch is a convertible mower. This allows

you to use the mower with the grass catcher fitted to the mower, (to pick up the grass cuttings) or

remove the grass catcher and fit with the mulching plug to mulch the grass. The advantages of this

design is that it allows you to gain the benefits of mulch mowing, but at times of rapid growth, or

when the mulched grass clippings are tending to buildup, the grass catcher can be fitted and the

grass clippings removed.

CAUTION

Follow these instructions to

avoid mower damage and

possible loss of warranty.

WARNING

The safety of the user and others

involved. Personal injury may

result should this information be

disregarded.

Rover Mowers Limited MULCH 'N CATCHTM

CONTENTS PA G E

Preface i

1. INTRODUCTION 1

1.1 Mulching 1

1.2 Benefits for your lawn 1

1.3 Benefits for you 1

2. SETTING UP 1

2.1 Multipurpose 1

2.2 Installing the Mulch Plug

for models 35m and 75m 1

2.3 Installing the Mulch Plug

for models 50m, 51m,

60m, 61m & 80m 2

2.4 Removing the Mulch Plug

for models 35m, and 75m 2

2.5 Removing the Mulch Plug

for models 50m, 51m,

60m, 61m & 80m 2

2.6 Vari-Tilt Conbar System 2

2.7 Vari-Tilt Conbar

Adjustment - Mulching 2

2.8 Vari-Tilt Conbar

Adjustment - Catching 2

CONTENTS PA G E

3. MAINTENANCE 3

3.1 General Mower Maintenance 3

3.2 Mulching equipment 3

3.3 Cutting Assembly 3

3.4 Blade Change 3

USEFUL MULCHING HINTS 3

ILLUSTRATIONS

Figure 1 - Installing the Mulch

Plug 35m, 75m 1

Figure 2 - Installing the Mulch

Plug 50m, 51m, 60m, 61m & 80m 2

Figure 3 - Conbar Adjustment 2

Figure 4 - Blade Change 3

Figure 5 - Blade & Fasteners 3

Figure 6 - Grass Height 4

Rover Mowers Limited MULCH 'N CATCHTM

1. INTRODUCTION

1.1 Mulching

The Rover Mulch ‘N Catch mower setup as a

mulching mower (grass catcher removed and

mulch plug fitted) reduces the grass clippings

into very fine particles. The design allows for

the even distribution of the grass particles at

the base of the lawn.

The mulched clippings can then:

•Break down quickly, releasing nutrients into

the soil, saving on fertiliser costs.

•Reduce evaporation of moisture from the soil

which reduces watering costs and effort.

•Help to control temperature extremes

protecting the roots of the grass.

•Assist in controlling soil erosion.

1.2 Benefits for your lawn

Research has shown that lawns are usually cut

too short. Grass, like any other plant life, relies

on photosynthesis to regenerate and survive.

Reduced leaf size (from cutting too low) can

seriously affect a lawn by:

•Making it easy prey for disease.

•Encouraging weeds to take hold.

•Exposing the soil to:

– greater evaporation;

– temperature extremes; and

– erosion.

Raising the cut height and using mulch mowing

follows the best practice for nurturing a

healthier more attractive lawn with less water

usage.

1.3 Benefits for you

Because you mulch as you mow the time and

cost savings are also significant:

•Eliminates raking of leaves before mowing

(the Mulch ‘N Catch mower picks up and

converts fallen leaves into mulch).

•Eliminates raking of cut grass.

•Saves the time spent emptying the catcher.

•Automatically disposes of grass clippings.

•Eliminates the need to dispose of clippings

at the refuse tip.

2. SETTING UP

2.1 Multipurpose

Your Mulch ‘N Catch mower is fitted with

multipurpose cutting blades for both mulching

and catching, as shipped from the factory. It is

also supplied with a mulch plug for mulch

mowing and a grass catcher for catch mowing.

To convert to a mulching mower install the

mulch plug (Refer 2.2 or 2.3) and adjust the

conbar to suit (Refer 2.7).

To convert to a catching mower, install the grass

catcher (Refer Owner’s Manual), and adjust the

conbar to suit (Refer 2.8).

2.2 Installing the Mulch Plug for

Models 35m and 75m (

Figure 1

1. Stop the engine.

2. Lift the rear flap of the mower.

3. Remove the grass catcher or deflector (if

fitted).

4. Insert the long right hand side of the mulch

plug first, into the rear of the mower.

5. Guide the mulch plug in until the spring tab

rests against the top edge of the mower base

and the lower edge rests on the front top edge

of the axle retaining bracket.

6. Give the mulch plug a firm jolt forward and

down into place.

Figure 1 - Installing the Mulch Plug -

35m, 75m

WARNING

Before removing or installing

the mulch plug or

grasscatcher. The engine

must be stopped.

Product specificaties

Merk:	Rover
Categorie:	Grasmaaier
Model:	Mulch 'N Catch

Heb je hulp nodig?

Als je hulp nodig hebt met Rover Mulch 'N Catch stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Grasmaaier Rover

Rover Rancher 1742 Handleiding

19 Juni 2023

Rover Raider 439/38 Handleiding

18 Juni 2023

Rover Pro Cut 560 Handleiding

18 Juni 2023

Rover Rancher 29257 Handleiding

13 Juni 2023

Rover Raider 1438 Handleiding

12 Juni 2023

Rover Challenger SP Mulch 'N Catch Handleiding

7 Juni 2023

Rover Rancher 2042 Handleiding

7 Juni 2023

Rover Hi Wheeler 11A-B0R6333 Handleiding

7 Juni 2023

Rover Rancher 28268 Handleiding

5 Juni 2023

Rover Rancher 4083 Handleiding

3 Juni 2023

Handleiding Grasmaaier

Nieuwste handleidingen voor Grasmaaier

Anova CC146T Handleiding

20 December 2024

Anova E60BC Handleiding

20 December 2024

Anova CC151T Handleiding

20 December 2024

Gude 320/20-4 Handleiding

19 December 2024

Zipper ZI-MOS4T Handleiding

19 December 2024

Ozito CPM-300C Handleiding

10 December 2024

Powerblade 350CX Handleiding

10 December 2024

Powerblade V475 Handleiding

10 December 2024

Stihl RM 253 Handleiding

8 December 2024

Baumr-AG 790SXe Handleiding

7 December 2024