RCA LED24G45RQD Handleiding

RCA Televisie LED24G45RQD

Lees hieronder de 📖 handleiding in het Nederlandse voor RCA LED24G45RQD (4 pagina's) in de categorie Televisie. Deze handleiding was nuttig voor 59 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

LED LCD TV

DVD COMBINATION

User's Manual

English Part No.: RN0324R24001

MADE FOR TODAY

LED24G45RQD

MODEL

Date of Purchase

Please register your product at www.rca.com

Please keep your sales receipt and keep the record of the serial number

and the date of purchase in order to receive warranty parts and service.

The serial number is located at the back of the TV.

Serial Number

Congratulations on your purchase! As you enjoy your new product,

please keep these safety tips in mind :

The Issue

The home theater entertainment experience is a

growing trend and larger ﬂat panel displays and

popular purchases.

However, ﬂat panel displays are not always supported

on the proper stands of installed according to the

manufacturer’s recommendations.

Flat panel displays that are inappropriately situated

on dressers, bookcases, shelves, desks, speakers,

chests or cats may fall over and cause injury.

1 2 2 3

Wall Mounting :

IF YOU DICIDE TO WALL MOUNT YOUR FLAT PANEL DISPLAY, ALWAYS :

- Use a mount that has been recommended by the display manufacturer and/or listed by an independent

laboratory (such as UL,CSA,ETL).

- Follow all instructions supplied by the display and wall mount manufacturers.

- If you have any doubts about your ability to safely install your ﬂat panel display, contact your retailer about

professional installation.

unsure, contact a professional installer.

- A minimum of two people are required for installation. Flat panel displays can be heavy.

This Manufacturer Cares!

The consumer electronics industry is committed to

making home entertainment enjoyable and safe.

Tune Into Safety

- One size does NOT ﬁt all. follow the manufacturer's

recommendation for the safe installation and use of

your ﬂat panel display.

- Carefully read and understand all enclo sed

instructions for proper use of this product.

- Don't allow children to climb on or play with

furniture and television sets.

- Don't place ﬂat panel displays on furniture that can

easily be used as steps, such as a chest of drawers.

- Remember that children can become excited while

watching a program, especially on a "larger than life" ﬂat

panel display. Care should be taken to place or install

the display where it cannot be pushed, pulled over, or

knocked down.

- Care should be taken to route all cords and cables

connected to the panel display so that they cannot be

pulled or grabbed by curious children.

Caution and Warning

CHILD

SAFETY

It makes A Difference How and Where

You Use Your Flat Panel Display

Child Safety Guide

CONTENTS

Channel Bar 08

Adjusting Volume 08

EPG (Electronic Program Guide) 08

Selecting Input Source 07

OSD Menu Operations 08

Turning On and Off

Choosing TV Channel

Basic Operations

Channel Menu

Adjust the OSD Screen

Frequently Asked Questions (FAQs)

11DVD OPERATIONS

Parental Menu

Picture Menu

Troubleshooting

Setup Menu

Sound Menu

Others Menu

Warranty Card

Wall Mounting Unit Speciﬁcation

USB Media Play

Product Speciﬁcation

Child Safety Guide 02

Caution and Warning 02

Safety Precautions 04

Cable Connections 05

Side Panel Connections 05

Connecting AV Composite video device 05

TV Signal Connection 05

Connecting YPbPr Component device 06

Side Keypad and Front Panel 07

Connecting HDMI device 06

Side Panel Buttons 07

Front Panel 07

TV Jacks Explanation 06

Check Accessories 05

Setup TV Table Stand 05

Select TV Location 05

Preparation for Your New TV 05

Connection and Using 05

¡Muchas gracias por su uso del presente producto!

Cuando usted disfruta de su nuevo producto, por favor tenga

en cuenta los consejos de seguridad:

Posibles Problemeas

- La experiencia de entretenimiento de cine en casa

es una tendencia creciente y los grandes monitores

de pantalla plana son muy populares.

embargo, los monitores de pantalla plana no se

han instalado siempre en los soportes adecuados o

instalado de acuerdo con las recomendaciones de

fabricante.

- Los monitores de pantalla plana que se han

instalado inadecuadament en tocadores, estanterías,

estantes, escritorios, oradores, baúle s o carros se

pueden caer y causar el daño corporal.

Montaje de Pared :

SI USTED DECIDE A MONTAR SU MONITOR DE PANTALLA PLANA LA PARED, SIEMPRE

- Use una montura que se ha recomendadop or el fabricante de monitor y/o listado por un laboratorio

independiente(como U L, CSA, ETL).

- Siga todas las instrucciones ofrecidas por eI fabricante de monitor y montaje de pared.

- Si usted tiene cualquier duda sobre su habilidad para instalar seguramente su monitor de pantalla plana,

contacte a su distribuidor para la instalación profesional.

- Compruebe que la pared adonde se está montando el monitor es adecuada. Algunos montajes de la pared

no son diseñados para ser montados a paredes con tachones de acero o la vieja construcción de bloque de

ceniza. Si usted está inseguro, contacte a un instalador profesional.

- Por lo menos dos personas se requieren para la instalación. Los monitores de pantalla plana puede ser pesados.

¡Al Fabricante le Importa

- La industria electrónica del consumidor está

comprometida a hacer el entretenimiento de casa

agradable y seguro.

Ajustar Hasta Seguridad

- Un tamaño ﬁjo NO es adecuado para todos. siga las

recomendaciones de fabricante para la instalación segura y

el uso de su monitor de pantalla plana

- Lea con cuidado y entienda todas las instrucciones

adjuntas para el uso propio de este producto.

- No permita a los niños a subir al equipo o jugar con

muebles y televisiones.

- No cloque los monitores de pantalla plana en el mueble

quese puede usar fácilmente como escalón, así como una

cómoda.

- Recuerde que los niños pueden llegar a ser excitados al ver

una programación, especialmente en el monitor de pantalla

plana "más grande que vida". El cuidado se tiene que

empezar por poner o instalar el moniotr donde no se puede

empujar, detener al castado del camino ni echar abajo.

- El cuidado se tiene que empezar por encaminar todos

los cordones y cables conectados al monitor de pantalla

plana para que no se puedan tirar o agarrar conectados

al monitor de pantalla plana para que no se pueden tirar o

agarrar por los niños curiosos.

SEGURIDAD

DE NIÑOS:

El Cómo y Doónde Usted usar Su

Monitor de Panntalla Plana

Marca La Diferrencia

FCC Notice

Guía de seguridad para niños

Fcc Information

This equipment has been tested and f ound to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC

rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation.

Th is eq uip me nt ge ne rat es, use s and can rad iat e rad io

frequency energy and, if not installed and used in accordance

with the instructions, may ca use harmful interference to radio

Communications.

However, there is no Guarantee that interference will not occur in a

particular installation.

If this equipment does cause harmf ul inte

rference to radio or

television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and the receiver.

- Connect the equipment into an outlet on a circuit different from

that

to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for

help.

Device complies with FDA radiation performance standards, 21

CFR subchapter.

Caution: (Invisible) Laser Radiation when open.

Do not stare into beam.

The ﬁrst step in connecting your TV is obtaining the signal. Your

TV LED24G45RQD has a back panel, which allows you to receive

analog and/or digital television channels via ANT/CABLE jack.

Before connecting your TV, determine using an antenna or a cable

service to obtain the signal.

A. Antenna

Connect the antenna to TV via coaxial cable on ANT/CABLE jack

of the back panel. You are ready to receive air local digital and

analog channels.

B. Cable TV service

Connect the cable TV wall jack to TV via coaxial cable on

ANT/CABLE jack of the back panel. You are ready to receive off-air

local digital and analog channels.

C. Set-Top Box

If you use a set-top box, you may need to call your cable company

or satellite service provider, which use a special connection, please

refer to the user’s guide of set-top box.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water. For example, do not use

near a laundry tub, in a wet basement, or near a swimming pool,

and the like.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with

the manufacturer’s instructions. Slots and openings in the cabinet

back or bottom are provided for ventilation, to ensure reliable

operation of the TV and to protect it from overheating. These

openings must not be blocked or covered. The openings should

never be blocked by placing the TV on a bed, sofa, rug, or other

similar surface.

8. Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including ampliﬁers) that

produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-

type plug. A polarized plug has two blades with one wider than the

other. A grounding-type plug has two blades and a third grounding

prong. The wide blade or the third prong is provided for your

safety. If the provided plug does not ﬁt into your outlet, consult an

electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the point where

they exit from the apparatus.

11. Only use attac hmen ts/a cces sori es spe ciﬁe d by the

manufacturer.

12. Use only with cart, stand, tripod, bracket, or table speciﬁed by

the manufacturer, or sold with the apparatus.

When a cart is used, use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

A TV and cart combination should be moved with care. Quick

stops, excessive force, and uneven surfaces may cause the TV and

cart combination to overturn.

13. Unplug this apparatus during lightning storms or when unused

for long periods of time.

For added protection for this TV receiver during a lightning storm,

or when it is left unused for long periods of time, unplug it from the

wall outlet and disconnect antenna or cable system.

This will prevent damage to the TV due to lightning and power line

surges.

14. Refer all servicing to qualiﬁed service personnel. Servicing is

required when the apparatus has been damaged in any way, such

as power-supply cord or plug is damaged, liquid has been spilled

or objects have fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate normally, or has

been dropped.

15. This TV should be operated only from the type of power supply

indicated on the rating label.

If customer is not sure the type of power supply in your home,

consult your appliance dealer or local power company. For TV

remote control battery power, refer to the operating instructions.

16. The TV set shall not be exposed to dripping or splashing. No

objects ﬁlled with liquids, such as vases, shall be placed on the TV set.

17. Never push objects of any kind into this TV through openings

as they may touch dangerous voltage or other electrical parts that

could result in ﬁre or electric shock. Never spill liquid of any kind into

the TV.

18. Unplug the TV from the wall outlet before cleaning. Do not use

liquid or aero cleaners. Use a damp cloth for cleaning.

19. This TV should never be placed near or over a radiator or heat

resource. This TV should not be placed in a built-in installation such

as a bookcase or rack unless proper ventilation is provided or the

manufacturer's instructions have been adhered to.

20. Do not place this TV on an unstable cart, stand, tripod, bracket,

or table. The TV may fall, causing serious injury to someone, and

serious damage to the appliance.

21. Do not attempt to service this TV by yourself because opening

or removing covers may expose you to dangerous high voltage or

other hazards. Refer all servicing to qualiﬁed service personnel.

22. This device complies with Part 15 of the FCC Rules. Operation

is subject to the following two conditions: (1) this device may

not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause

undesired operation.

23. WARNING: To prevent injury, this apparatus must be securely

attached to the ﬂoor/wall in accordance with the installation

instructions.

24. To reduce the risk of electric shock, the grounding of center pin

of plug must be maintained.

25. If an outside antenna or cable system is connected to the TV,

be sure the antenna or cable system is grounded to provide some

protection against voltage surges and built-up static charges.

Section 810 of the National Electrical Code, ANSI/NFPA NO.70,

provides information with respect to proper grounding of the mast

and supporting structure, grounding of the lead-in wire to an

antenna discharge unit, size of grounding conductors, location of

antenna discharge unit, connection to grounding electrodes, and

requirements for the grounding electrodes. (See ﬁgure A)

Safety Strap

Caution: Pushing, pulling or climbing on the TV may cause the TV

falling. Do not let children climb or hang on the TV. Always place the

TV on a sturdy, level, stable surface that can hold the weight of TV.

And if possible, secure the TV according to the instruction below

(Note: The fastening components such as screws are not supplied

with TV).

Step one: Insert the M6 mounting screws into the upper two wall

mounting screw holes and fasten them (Figure B).

Step two: Insert anchors to wall and connect the bolts and anchors

with ropes or chains (Figure C).

Before Turning On TV

Check Accessories

Check the accessories that are packed with your TV.

(refer to Quick Start Guide)

Setup TV Table Stand

Please refer to Quick Start Guide to carry out stand installing.

Select TV Location

Select a ﬂat, stable table to place your TV set. Please follow the

safety instructions when placing the TV.

Connection and Using

After placing your TV properly, you can connect the TV with power

supply and cable components. For further information, see page 5

to page 6.

Preparation for Your New TV

TV Signal Connection

Safety Precautions

Note: Do not plug the AC cord until you have accomplished all the

connections. This TV does not support QAM under cable channel

search.

How to obtain various kinds of Input Sources

Choose Your Connections

TV LED24G45RQD supports various connections to other devices

(such as DVD, VCR, Set-top box, etc.). Please follow the table to

choose the cables which adapt to your device.

Note: HDMI, the HDMI logo, and High-Definition Multimedia

Interface are trademarks or registered trademarks of HDMI

Licensing LLC

Caution: Unplug the AC cord when you connect other devices to

TV.

Connecting AV Composite device

(Good Video Quality)

Composite connector will be shared with Component Y connector.

To connect a composite AV device, such as a DVD player, follow

these steps:

1.Connect the COMPOSITE jack on the side of TV to the video

output jacks of device via video cable (yellow).

2.Connect the L-AUDIO-R jacks on the side of TV to the audio

output jacks of device via audio cable.

Notice the left channel jack and plugs are white and the right

channel jack and plugs are red.

Note: AV signal belongs to composite video. This kind of video

signal has regular good display quality.

Composite Video Connection

The picture below is an example of a connection using the

composite video jack.

HEAD PHONE: Connect a 3.5mm headphone for personal audio.

USB: Connect your USB storage device to enjoy music/photo ﬁles

on your TV. (Also used for service purpose).

COMPONENT Y/Pb/Pr: Connect a device that has component

video jacks, such as a DVD player. To access device connected

to the Y/Pb/Pr jack, press the INPUT button on your remote; then

press the up/down arrow to select Component. Press the OK

button at last to conﬁrm.

Y/Pb/Pr (Component Video): They provide good picture quality

because the video signal is separated into three components. Use

three video-grade or component video cables for the connection.

When using Y/Pb/Pr, make sure you connect left and right audio

cables to the AUDIO IN R/L jacks.

L-AUDIO-R, COMPOSITE: Connect an AV device that has

composite video jacks, such as a VCR or a DVD player. To access

device connected to these jacks, press the INPUT button on your

remote; then press the up/down arrow to select AV. Press the

OK button at last to conﬁrm.

AUDIO IN L: Left audio channel connection. The left audio

connector is usually white. For mono audio sources, be sure to

use the left AUDIO INPUT.

AUDIO IN R: Right audio channel connection. The right audio

connector is usually red.

ANT/CABLE: Connect to receive the signal from your antenna or

cable via coaxial cable.

Digital Audio out:

Connect a coaxial cable for digital audio

output.

Connecting HDMI device (Best Video Quality)

To connect a HDMI device, such as a DVD player, please Connect

the HDMI/MHL, jack on the side of TV to the output jacks of

device via HDMI cable.

Front Panel

Power/Standby Indicator: Light up in red when the TV is in

standby mode. Light out when the TV is on.

Remote Control Sensor: Remote control IR sensor, which

receives infrared ray sent by remote control.

Codes for Cox Communications: 0178

Codes for Comcast: 10178

Codes for Dish Network: 627

Codes for Fios Verizon: 0205, 0057, 0493, 0775

Keypad Buttons

If you cannot locate your remote, you can use the keypad buttons

on your TV to operate many TV features.

Connecting YPbPr Component device

(Better Video Quality)

To connect a component device, such as a DVD player, follow

these steps:

1.Connect the COMPONENT IN Y/Pb/Pr jack on the side of TV to

the video output jacks of device via video cable (green, blue and

red).

2.Connect the L-AUDIO-R jacks on the side of TV to the audio

output jacks of device via audio cable.

Notice the left channel jack and plugs are white and the right

channel jack and plugs are red.

Note: Y/Pb/Pr jacks are component video. This kind of video signal

has better display quality.

Component Video Connection

The picture below is an example of a connection using the component

video jack.

5 6

6 7

Remote Control Sensor

Power/Standby Indicator

1. Connect the HDMI/MHL jack on the side of TV to the MHL

port of

Mobile High-Deﬁnition Link

via MHLcable.

2. Connect the L-AUDIO-R jack on the side of TV to the audio

output jack of computer with audio cable (dual-channel RCA jacks

to 3.5mm stereo jack or the L-AUDIO-R jack).

Note: 1. HDMI (High-Definition Multimedia Interface) is a compact

audio/video interface for transmitting uncompressed digital data. It

carries the audio and video signal via the same cable and has the

best display quality.

HDMI Connection

The picture below is an example of a connection using the HDMI

video jack.

Turning On and Off

Connect the AC cord to power the LED LCD TV. At this time the

TV will enter standby mode and power indicator will turn red. Use

Power button ( ) on the top panel of TV or on the remote control

to turn on the TV. After switching off the TV for 5 seconds, you can

turn on TV again.

Choosing TV Channel

Tuning To Analog Channels

an analog channel has a channel number beginning with “A”.

Input the digital number with numeric buttons directly and press

OK button to conﬁrm. For example, to watch analog channel “A51”,

press “5”, “1”, “OK” on remote control in sequence.

Note: Although there is no analog TV signal available in America,

we reserve ATV functions for some expansible use.

A digital channel has a channel number beginning with “D”. Input

the main digital number with numeric buttons directly, then press

Tuning To Digital Channels

“ ” button on remote control, and input the sub number at last.

For example, to watch analog channel “D31-1”, press “3”, “1”, “ ”,

“1”, “OK” on remote control in sequence.

Changing Channels Directly You can use CH button to increase

channel number and CH to decrease channel number.

When no OSD (On Screen Display) is used, the up/down arrows

can also work as CH /CH buttons.

Selecting Input Source

Pre ss INPU T but ton on rem ot e

control to display Source Select list.

Use up/down arrows to highlight the

source you need and press OK to

conﬁrm.

About remote control

working distance and

angle, see the

start guide.

quick

Keypad and Front Panel

TV Jacks Explanation

Side Panel Connections

Cable Connections

Basic Operations

How to Obtain Various Kinds of Input Sources

After connection is done, press INPUT button on remote control

or TV top panel to choose the input source you need. See page 7,

Basic Operation of TV.

Displays the Source Select List.

Displays the TV Main Menu.

Scans up through the channel list.

In the TV menu system, it acts like the up arrow on the

remote control and can be used to select menu options.

Scans down through the channel list. In the TV menu

system, it acts like the down arrow on the remote

control and can be used to select menu options.

Increases the volume. In the TV menu system, it acts

like the right arrow on the remote control and can be

used to select menu options.

Decreases the volume. In the TV menu system, it acts

like the left arrow on the remote control and can be used

to select menu options.

Turns the TV on and off.

HDMI MHL

HDMI : (High-Deﬁnition Multimedia Interface) It provides an

uncompressed digital connection that carries both video and audio

data by way of an integrated mini-plug cable.

MHL: (Mobile High-Deﬁnition Link) To standard HDMI input, transmit

the video/audio from portable electronic device (cellphone,digital

camera, digital-video camera) to TV set.

USB

DVD

Move SelectOK

HDMI/

MHL

Connecting a computer

To connect a computer, follow these steps:

1.Connect the VGA port on the back of TV to the VGA output jack

of device via D-sub 15-pin cable.

2.Connect the PC SOUND jack on the back of TV to the audio

output jack of computer with audio cable (3.5mm).

PC Connection

The picture below is an example of a connection using your TV as

a PC monitor.

Note: If you want to use your TV as a monitor, please notice that

the maximum resolution for LED24G45RQD is 1920*1080. Please

set the computer graphic correctly.

HDMI/

MHL

HDMI/

MHL

VGA: Connect your computer or other device with a VGA output to this

jack using a 15-pin, D-sub cable.

SOUND :

Use 3.5mm stereo mini-pin cable to connect PC divece to TV.

VIDEO :

Use video cable to connect video ﬁles to TV.

Audio cable with

3.5mm terminal

VGA cable

SOUND PC VGA

Move Change Setting

OK MENU Return

DVD mode of TV LED24G45RQD

TV has a built-in DVD player module, whichLED24G45RQD

you can use to watch DVD disk. The following operation guide

gives the DVD module instruction.

1. How to enter DVD mode for TV LED24G45RQD

Press INPUT button on remote control, select “DVD” in the Source Select

menu (see page 7), then press OK or right arrow to enter DVD mode. The

DVD will start playing automatically if there is a disk in DVD module. If not,

the TV will display a standby screen as shown. And a “No Disc” message

will appear on screen.

Note: The TV will turn to DVD mode automatically when you insert a disk, no

matter which mode it is now.

2. Insert a disk to DVD player

Insert the DVD disk with reﬂector surface facing the front of TV.

Disk reﬂector surface facing the front of TV.

Note: Do not insert with much strength. Insert disk gently and the DVD

module will load in the disk automatically.

3. DVD control

You can control the DVD playing with keypad on DVD module or with

remote control. For operating information, see the follow.

Keypad on DVD module

About DVD control buttons on remote control, see the quick start guide

of accessories with your TV.

4. DVD basic operations

Play/pause the disk: After inserting the disk to DVD module, the TV will

play DVD disk automatically. You can use PAUSE button to suspend the

playing. Press PLAY button, the TV will restore playing.

Stop playing: During playing, you can use STOP button to stop playing. If

you press STOP once, the DVD will be stopped brieﬂy. Press STOP again, it

will stop completely and the disk in DVD module no longer wheels.

Eject the disk: You can press EJECT button to eject the disk from DVD

module. And press EJECT again, the DVD will load the disk renewedly.

*This function is enabled only when DVD mode is on.

Going backward or forward: You can press FR for fast review and FF

for fast forward. You can also press PREV to return to the previous chapter,

and press NEXT to skip to next chapter.

Function menu: Press DISC MENU, you will return to the selection menu

of current DVD function. For example, you are using “Audio Selection”,

and you choose “Continue playing”, then after selecting, you can press

DISC MENU to go back to “Audio Selection” menu while playing.

Title menu: Press TOP MENU, you can reset the disk to the title menu.

It equals

to ejecting and loading the disk again.

Zoom in: Press ZOOM, you can zoom in the screen for 2 times, 3 times

or 4 times from centre. This function provide a better view of the content

locate near screen centre.

Subtitle selection: Press SUBTITLE, you can switch the available subtitles

in DVD disk.

Audio language selection: Press AUDIO TRACK, you can switch the

available audio language in DVD disk.

Repeat: There are two kinds of repeat, one is regular repeat and the other

is Atop repeat. For regular repeat, press REPEAT button to switch between

chapter repeat, title repeat and all repeat. For A-to-B repeat, press A-B

once to set the repeating origin and press it twice to set the repeating end.

DVD-setup menu: Press

DVD/BD SETUP

button, a speciﬁc setup menu

for DVD will display on screen. This menu is especially prepared for DVD

control.

5. DVD setup menu

A. General setup page

There exist three sub-menus in DVD setup menu, the ﬁrst one is General

Setup. Press SETUP button on remote control to display General Setup

Page. Press up/down arrow to select the item you want to adjust and press

right arrow or OK button to activate it. After activating, use up/down arrow

to set item value. When you are satisﬁed with the adjustment, press left arrow

to return to the upper level of general setup menu. Press left arrow repeatedly,

you can exit the DVD setup menu. To exit setup menu directly, press

DVD/BD SETUP.

TV Display

Set the TV display shape.

OSD Lang

Set the DVD OSD language as English, French or Spanish.

Last Memory

Set it on to memorize the last stop point. During playing the DVD, if you

change to another mode and then come back to DVD mode, it can play

automatically from the last stop point.

Note: We suggest you turn off the last memory function unless you really

need it. To turn on this function may influence the lifetime of flash memory of

DVD module

B. Speaker setup page

Press

DVD/BD SETUP

button on remote control to display General Setup Page.

Press left/right arrow to choose Speaker Setup Page. The operating

method is similar with the General Setup Page.

Downmix

This option is preset as Stereo. That means the DVD player will output a

two-channel audio signal (L/R) to TV front speakers (left/right).

C. Preference page

Press

DVD/BD SETUP

button on remote control to display General Setup Page.

Press left/right arrow to choose Preference Page. The operating method is

similar with the General Setup Page.

TV Type

Set the TV type as PAL, Auto or NTSC.

Note: American DVD standard is NTSC system, so we suggest you set the

TV Type as NTSC. In addition, you can also set it as PAL to watch some disks

with PAL system, or select Auto for convenience.

Audio

Set the DVD audio language.

Subtitle

Set the DVD subtitle language.

Disc Menu

Set the DVD disk menu language.

Parental

Set the parental control rating as KID SAF, G, PG, PG13, PGR, R, NC17 or

ADULT. To change this option, you need password, and the original one is

“0000”.

Default

Reset the DVD setup menu options as factory default.

8 9 9 10 1011

DVD Operations

What’s the most convenient way to view High Definition (HD)

video?

Connect an antenna to the TV Input jack to view free local digital

channels. You may need to purchase an antenna. (See page 5 for more

information about antenna setup).

Visit www.antennaweb.org for assistance in deciding what type of

antenna to use to receive the local digital channels available to you.

After entering your location, this mapping program tells you which local

analog and digital stations are available using a certain antenna.

Are there other ways to view High Definition(HD) video?

Besides using an antenna as mentioned above, you can also use a set-

top box to receive digital video. Contact your cable service provider

or satellite provider to purchase digital programming and have them

connect the box to ensure you are viewing channels in the best way.

How do I tell an analog channel from a digital channel?

Press the OK button to display the Channel Bar.

When no OSD

(On Screen Display) is used,

Look at the topright corner of the screen.

An “A” is displayed for an analog channel.A “D” is displayed for a digital

channel. Note: Since the analog TV inAmerica has been cut off, we

reserve analog TV function only for some unexpected use.

Why are there bars on my screen, and can I get rid of them?

Why does channel sear ch find a lot of channels, but when I

try to tune to them, there’s nothing there?

Some channels don’t carry programming, such as video On Demand.

When channels are unavailable, your TV screen is blank or appears like

snow. You probably want to remove these channels from your channel

list. Remove these in the Channel List Menu. Go to page 8 for more

information.

Why does it take a long time when I search the channels

at first time?

If you have both analog and digital channels, the TV is looking for all

available channels in the channel list. If you do have digital channels, the

TV is also searching for scrambled channels, non-scrambled channels,

and each sub-channel of that digital channel.

Identifying Problems

If there are any problems when using the product, please consult the

list below. If the list does not solve the problem, call our Customer

Service Center immediately.

TV Problems

The TV can’t be turned on.

Make sure the AC cord is plugged in.

- Check the wall outlet, make sure the AC output works normally

and stably.

- The side panel may be locked (disabled). Use the remote control

to turn on the TV.

- Select the Keypad Lock function in the PARENTAL control Menu

and press OK to uncheck the locking status.

There is no picture or sound but the TV is on and there is a “No

Signal” sign on screen.

- Are you trying to use an input source with no device connected

to it? For using other video/audio device, make sure the external

The Remote control doesn’t work.

-There may be an AC power failure or the power cord unplugged

in.

- Something might be blocking between the remote control and the

remote sensor on the front panel of the TV. Make sure there is a clear path.

- The remote may not be aimed directly at the TV.

- The batteries in the remote may be weak, dead, or installed

incorrectly. Put new batteries in the remote.

You are experiencing problems with V-Chip/Parental Controls.

- If the rating limits don’t work, you must lock the settings. Go to the

Main Menu (press MENU on your remote), select PARENTAL con trol to

check the settings.

What else can I do?

If you’ve been through the Troubleshooting section and nothing has

ﬁxed your problem, try rebooting your TV.

Note that after a reboot, you may need to run your TV through the

setup process again. To reboot, unplug the power cord from the wall

outlet or power strip.

Keep your TV unplugged for about 5 minutes. Then plug in the TV and

turn it on. See if the problem is ﬁxed.

If the problem remains, then please visit the Customer Support Menu at

www.rca.com or updated FAQs or contact RCA Customer Support at

the support number provided in your Warranty card.

Note

A. The wall mount is not contained in the accessories sold with television.

We only provide the installing specifications but not the wall mount itself.

If you need the mount, please consult with the local dealer for a VESA

wall mount.

B. We strongly suggest to set the wall mount with equipments of

specification we ordered. If not, inappropriate installing may cause

damage to device or people.

C. We suggest that you keep your TV at least 2.36 inches(60mm) from the

wall to prevent cable interference.

Warnings

1. Do not set up the wall mount by yourself. Please contact

qualiﬁed professionals for installation.

2. The TV should not be mounted on walls or surfaces which have

an angle more than 10 degrees with vertical direction. Otherwise

the TV set may fall.

3. The walls for mounting must have enough strength to hold the

whole weight of TV set. For example, concrete wall and brickwork

are eligible. Do not place the mount on soft walls such as earth

walls and plasterboard.

device works normally ﬁrst, then press INPUT and choose the right

input source.

- The Signal Type option may be set incorrectly. Go to page 8 for

detailed instructions.

- The channel may be blank. Try to search the channel again or

change another channel.

The sound is fine, but the picture is poor.

- If you can only get black and white pictures from external device

that you've connected to your TV, maybe it is due to the video

cables is not connected well, or they are connected wrongly.

Check the connection stability ﬁrst, then check the correctness.

For AV input, the yellow video cable connects to the yellow Video

In jack on the side of your TV.

For Component input, the three Y, Pb, Pr video cables (red, blue,

and green) should be connect to the corresponding input jacks

on the side of your TV.

- Check the antenna connections. Make sure all of the cables are

ﬁrmly connected to the TV jack on side of your TV.

- Try adjusting the color features to improve.

There is no sound, but the picture is fine.

- The sound might be muted. Try pressing the MUTE button to

restore sound.

- For using AV or Component, remember to connect the device’s left

and right audio output correctly. The left channel cable is white and the

right channel cable is red. Please match

the cables and jacks according

to their colors.

- The sound settings may not be set correctly. Go to page 9 for

more information.

- If your audio source has only one jack or is a (mono) audio source,

make sure you have plugged the connection into the Audio In L jack

(white) on the TV.

The buttons on the side panel don’t work.

- The side panel may be locked (disabled). Use the remote control to

turn on the TV.

- Select the Keypad Lock function in the PARENTAL control Menu and

press OK to uncheck the locking status.

- Unplug the TV from the AC power for 10 minutes and then plug it back.

Turn the TV on and try again.

The TV turns off unexpectedly.

- The electronic protection circuit may have been activated because of

a power surge. Wait 30 seconds and then turn the TV on again.

If this happens frequently, the voltage in your house may be abnormal.

If the other electronic equipment in your home can’t work normally,

consult a qualiﬁed service personnel.

Can’t select a certain channel.

- The channel may be blocked or not approved in the PARENTAL

control Menu.

- The channel may be skipped in channel list in CHANNEL Menu.

Check the blocking and skipping status of channel.

The stereo sound performance is bad.

- It may be a weak station. Use the AUDIO Menu and set Analog Sound as

Mono.

A black box appears on the screen.

- Closed captioning might be on. Check Closed Caption in the SETUP

menu. Go to page 10 for more instructions.

Problems with the HDMI Connection.

- Make sure the HDMI device (DVD, video gamer, etc.) is turned on and the

cables are ﬁrmly connected.

If problems still occur, turn off your device and reconnect it. Reset the

power by unplugging the power cord and plugging it again.

- If a “No Signal” message appears on screen , the HDMI device

isn’t responding. Contact the manufacturer of the HDMI device for

further assistance.

- If you have black bars on each side of your picture (which

means the TV can not display a full-screen image), the device you

connected might have a switch or a menu option allowing you to

change the picture quality output that will ﬁx this. Choose either

720p or 1080i.

Model Unit Dimension (unit:mm) Screw

LED24G45RQD VESA 100 x 75 M6 screws, length 12mm

1213

Troubleshooting

Wall Mounting Unit Speci cationﬁ

Frequently Asked

Questions (FAQs)

Digital Caption Type

Press left/right arrow to select digital closed caption type:

Service1, Service2, Service3, Service4, Service5, Service6.

Digital Caption Style

Press left/right arrow to go to digital closed caption style sub-menu,

to select the closed caption style. Select the item you want to adjust

in Digital CC Style menu with up/down arrows. After changing, you

can preview the caption style in the bottom.

• Mode: Decide whether you can change the settings on the CC

Display Style.

• CC Size: Set the CC font size (Default, Normal, Large, Small).

• CC Font: Set the CC font (Default, Font 0 - 7).

• CC Opacity Color: Set the CC opacity color (Default, Solid,

Flashing, Translucent, Transparent).

• Text Color: Set the CC text color (Default, White, Red, Green,

Blue, Yellow, Magenta, Cyan).

• CC Background Opacity: Set the CC background opacity (Default,

Solid, Flashing, Translucent, Transparent).

• CC Background: Set the CC background color (Default, White,

Red, Green, Blue, Yellow, Magenta, Cyan).

All reset

Press

button to execute reset to TV system. All the settings

will be reset to factory default.

Note: The OSD’s appearance and color are referred to the actual

appliance.

Blue Back

Press

button to select Blue Back on or off. If the Blue Back is

turned on, the TV will display a blue background when there is no

signal input.

No Signal Power Off

Press left/right arrow to select a time period (Off, 1 Min, 5 Min, 10

Min) for “No Signal Power Off”. The TV will shut off after that period

of time while no signal. We suggest you turn on this function when

Blue Back is turned on. It may hurt the LED LCD panel if blue

screen is on for too long.

Parental Control

• When the Parental Control Menu is accessed from the Main Menu,

you need to enter password to unlock the menu function. Please

enter your four-digit password with numeric keys 0~9. Note: The

original password is “0000”.

• After unlocking, the items in parental control menu can be used.

Use arrow up/down to highlight the function you need and press

or right arrow to use V-chip, Change Password, Keypad Lock

and Source Lock, Clear Channel List sub-menu.

Audio Menu

The Audio Menu lets you adjust audio output. To access the

Audio Menu, press MENU on the remote, and then select Audio

from the Main Menu. Press

/down button to proceed to Audio

menu. Use up/down to choose the function you need, press

or right arrow to adjust or enter a sub-menu.

Sound Mode

Choose the preset sound mode of your TV:

Standard, Soft, User, Dynamic. Only in User mode you can adjust

Bass, Treble, Balance.

• Bass: Adjust the bass component of TV sound.

• Treble: Adjust the treble component of TV sound.

• Balance: Adjust the balance between the left and right channel.

Audio Language

Select digital TV audio language type: English, French or Spanish

(only available for DTV channel).

Analog Audio Output

Select analog TV audio sound type: Stereo, Mono or SAP (only

available in TV mode).

Digital Audio Output

Set the audio output type as Off, PCM or Raw. Please set this

option according to your power ampliﬁer.

Surround

Creates a 3D sound surround from standard stereo material, with

deep and rich enhancement.

Audio Only

Press

button to activate audio only mode. The TV will

output only

sound and the LED LCD panel will be turned off. To restore normal

playing, hold POWER button for three seconds.

Auto Volume

Set auto volume control on/off.

Equalizer Settings

The seven-band graphic equalizer allows you to adjust the audio

frequency settings. You can select one of the equalizer presets

(Off, Pop, Rock, Jazz) or create your own personal preset (User).

Press the left or right arrow to select the frequency (100Hz, 250Hz

500Hz, 1KHz, 2KHz, 4KHz, 10KHz). you want to adjust. Use the

up or down arrow to adjust.

Channel Menu

The Channel Menu enables you to search, view and edit channels.

It is available in TV mode only. Press MENU and choose CHANNEL

from the Main menu. Press the

/down button to proceed to

CHANNEL menu.

Quick Menu

The Quick Menu contains menus and provides you a quick way to

approach the main settings that may be most possibly and frequently

approached. Press MENU on the remote and then you will see the

Quick Menu showing on your screen. Press the down button to

proceed the Quick Menu. Use up/down to choose the function you

need, press OK to enter a sub-menu and press left/right arrow to

adjust a sub-menu.

US V-Chip

Press

to enter US V-Chip ratings menu, which contains two

sub-menus: TV rating and Movie Rating.

Change PIN

Change the PIN of parental menu.

Movie Rating

Use arrow keys to select the rating level you want to block, press

to lock/unlock the rating level. If you have blocked a lower level

rating, the higher ratings will be blocked too. For example, when

PG-13 is blocked, R, NC-17 and X will be blocked at the same

time.

TV Rating

Similar with Movie Rating. After adjusting, press MENU to return

or press HOME to exit the menu.

Canada V-Chip

Press

or right arrow to enter Canada V-Chip ratings menu,

which contains two sub-menus: English Rating and French Rating.

English Rating

Press

to enter English rating menu. Use arrow keys to select the

rating level you want to block, press

to lock/unlock the rating

level. If you have blocked a lower level rating, the higher ratings will

be blocked too. For example, when PG is blocked,14+ and 18+ will

be blocked at the same time.

French Rating

Press

to enter French rating menu. Similar with English Rating.

Note: These ratings are available only if the broadcaster is sending

rating information.

Picture Menu

The Picture Menu contains menus and controls to conﬁgure the

way the picture appears. The Picture Menu options apply to the

video for the main TV and VIDEO INPUT selections. All picture

options can be applied to each input.

Press MENU on the remote. Select Picture from the Main menu.

Press the OK/down button to proceed to PICTURE menu.

Use up/down to choose the function you need, press OK or right

arrow to adjust or enter a sub-menu. the detailed explanation are

shown below. If available, use the text at the bottom of each screen

for help.

Use up/down to choose the function you need, press

or right

arrow to adjust or enter a sub-menu. explanation are shown below.

Sleep Timer

Set the sleep timer(Off, 5, 10, 15, 30, 60, 90, 120, 180, 240 Min).

The TV will automatically enter standby mode after times up.

Time Zone

Showing the country’s time zone. you can Set Time zone Off

Eastern, Central, Mountain, Paciﬁc, Alaska, Hawaii, Samoa,

Newfoundland, Atlantic.

Picture Mode

Choose the preset visual mode of your TV:

Standard, Movie, User, Dynamic, Power Saving. (Only in User mode

you can adjust Brightness, Contrast, Color, Tint and Sharpness.

Changes to Power Saving mode can decrease the power

consumption.)

• Brightness: Adjust the brightness of picture.

• Contrast: Adjust the contrast of color.

• Color: Adjust the richness of color.

• Tint: Adjust the balance between red and green level (only

available in NTSC signal).

• Sharpness: Adjust the sharpness level of picture.

Color Mode

This option allows you to select one of three automatic color

adjustments: Cool for a bluer palette of picture colors; Normal or

Warm for a redder palette of color.

Screen Size

Screen Size: Select a screen aspect ratio. (Available ratio: Wide,

Cinema, Zoom, and Normal.) Please choose the ratio that applies

to your video signal format best.

Noise Reduction

Set noise reduction as Off/low/Medium/High.

Dynamic Contrast

Set dynamic contrast Off/low/Medium/High.

Video Style

If you connect the HDMI/DVI port of PC to HDMI jack of the TV

and the video signal is 1080p, please choose the compatible

video style: Video, Graphic.

Note: Noise reduction helps to reduce the picture “static” or any

type of interference. This feature is especially useful for providing a

clearer picture in weak analog signal conditions.

Use up/down to choose the function you need, press

or right

arrow to adjust or enter a sub-menu. The detailed explanation are

shown below.

Auto Scan

Execute an auto channel search.

Show / Hide

Enter sub-menu and press

to show or hide the TV channel.

Channel List

Displays a channel list. It shows the current channels. Press

go to TV channel directly in sub-menu.

Signal Type

Select your TV signal type: Air or Cable.

DTV Signal( In DTV Mode)

Display how strong your TV signal is.

Auto Clock

Select auto clock on/off. Auto clock helps you synchronize your

TV time to standard time (from DTV signal).

Clock

Set your TV time manually (needs to turn off auto clock). press up/

down and left/right arrow to conﬁg the current time.

Wake Up

Set the Wake Up time for your TV. after enters menu, you can

use the up/down and left/right arrow on the remote control to

adjust it.

OSD Display Duration

Set the time how long to display OSD menu(5 Sec, 15 Sec, 30 Sec,

45 Sec, 60 Sec).

Setup Menu

The Setup Menu lets you conﬁg the TV with your preferences. Select

SETUP from the Main Menu. Press

/down button to proceed to

SETUP menu.

Input Block

This option allows you to lock or unlock the input source. The

source blocked can not be chosen from input list unless you input

the correct parental password. Use up/down arrow to select the

source, press

to lock or unlock it.

V-Chip

Press

to enter V-Chip sub-menu, the detail as follow:

Block Unrated Show

Block all the unrated program.

Clear Downloadable Data

Activate or downloadable rating data. if available.

Use up/down to choose the function you need, press

or right

arrow to adjust or enter a sub-menu. The detailed explanation are

shown below.

Menu Language

To choose your menu language, press the left/right arrow until

the language you need appears. Available languages:

English, French and Spanish.

Menu Transparency

To choose your menu transparency mode, press the left/right

arrow until the transparency you need appears: 0%, 25%, 75%,

100%.

Closed Caption

Press

to enter closed caption sub-menu, the detail as follow:

Channel Bar

Press the OK button on the remote control, when OSD (on-screen

display)is not used, the channel bar will appear on the Bottom of the

screen. It displays the current channel’s information. The following list

describes the items on the channel bar.

Adjust the OSD Screen

The OSD (On Screen Display) menu enables you to approach to the

TV functions.

To use OSD menu system, press OK button on remote control, then

use left/right arrow to highlight an option from QUICK, CHANNEL,

PICTURE, AUDIO, TIME, SETUP or LOCK and press OK/down

button.

Press the up and down arrow to move to a different option within

each menu. If necessary, press OK or right arrow to display the

choices of the option you’ve highlighted. If available, use the text at

the bottom of each screen for help. To return to the previous menu,

press the MENU button.

To exit the OSD menu:

• Press the HOME button. The menu will clear from the screen.

• Press the MENU button repeatedly until the menus disappear.

Adjusting Volume

Press the VOL+/VOL- button on the remote control to adjust the

volume. If you want to switch sound off, press MUTE. When OSD

(On Screen Display) is not used, the arrows left/right can also work

as VOL-/VOL+ buttons.

EPG (Electronic Program Guide)

Press EPG button on the remote control, the electronic program

guide will appear in the center of screen. The electronic program

guide gives the TV program playing project. You can use left/right

arrows to switch pages.

OSD Menu Operations

Directed to Children 7

Years and Older

All Children

TV-MA

TV-14

TV-PG

TV-G

TV-Y7

TV-Y

FV Fantasy Violence

Age-Based Ratings

Mature Audience Only

Parents Strongly Cautioned

Parents Guidance Suggested

General Audience

D Sexually Explicit Dialogue

L Adult Language

S Sexual Situations

V Violence

Content Themes

No children under age 17.

Adults only.

PG-13

NC-17

DetailRating

Rating

General Audience (no restrictions).

Parental guidance suggested.

Parents strongly cautioned.

Restricted. Children under 17

should be accompanied by an adult.

PICTURE

Picture Mode

Color Mode

Screen Size

Noise Reduction

Dynamic Contrast

Video Style Video

Move Select

OK MENU Return

Low

Wide

Warm

Time Menu

The Time Menu lets you change the TV time settings. To

access the Time Menu, press MENU on the remote, and then

select Time from the Main Menu.

Lock Menu

The Lock Menu enables you to lock program with special content,

panel key board and input source. Press MENU on the remote and

choose Lock Menu from the Main Menu. Press the down button to

proceed the Lock Menu. The menu image and explanation are

shown below.

QUICK MENU

Picture Mode

Sound Mode

Closed Caption

Sleep Timer

Channel List

Move Select

OK MENU Return

Off

CHANNEL

Auto Scan

Show / Hide

Channel List

Signal Type

Move Select

OK MENU Return

Air

LOCK

Parental

Control

Change PIN

Input Block

V-CHIP

Keypad Lock

Clear Channel List Execute

Change your 4-digit PIN

Keypad Lock

Select this option to block or unblock the TV’s side panel buttons

so that they can’t be used.

Clear Channel List

This option allows you to execute Clear Channel List function.

This function will reset the whole TV system to factory default (not

only reset OSD menu).

Caption Display

Press left/right arrow to select caption display cc on or cc off.

DTV Signal Good

Programming generally considered acceptable for

children 8 years and over to watch on their own.

Programming intended for children under age 8.

18+

14+

C8+

DetailRating

Adult programming

Programming contains themes or content

which may not be suitable for viewers under age of 14.

Parental Guidance

General programming, suitable for all audiences.

General

18ans+

16ans+

13ans+

8ans+

DetailRating

Programming restricted to adults.

Programming is not suitable for

children under the age of 16.

Programming may not be suitable for

children under the age of 13.

Programming generally considered acceptable for

children 8 years and over to watch on their own.

Most digital video is sent in a 16/9 format which ﬁlls your screen, but

is sometimes sent in 4/3 which does not ﬁll your screen. It depends

on how the station or device connected to your TV is formatting the

video. If there are bars on the screen, Check Screen size in the picture

mode to try a different format that may eliminate the bars. Some bars

can't be removed because of the way the format is sent by the

broadcaster. The format changes as you choose screen size type in the

picture mode and the format type is displayed at the bottom of the screen.

For more information on screen size, go to page 9.

Jan-01 07:10 Sat

4:3/CC

480i/480i

English/Stereo

Displays current program date and time.

Displays the screen aspect ratio.

Display the CC status (on or off).

Displays the signal resolution.

Displays whether the current channel is

being broadcasted in stereo or mono. If

the current channel is digital, this space

will be SAP (Second Audio Program)

language.

ATSC-1

D14-1/A2

English

480i

Air

DTV ATV

4:3

Jan-01 07:10 Sat

D14-1 ATSC-1

Stereo

480i

Air

Jan-01 07:10 Sat

If the channel is analog, A is displayed. If

it’s a digital channel, D is displayed. For

example, in the pictures above, A2 is an

analog channel, and D50-1 is a digital

channel ( -1 is a sub-channel number).

Display the current channel number

Remote

select your remote: Off, remote1 or remote2. this is for special

purpose.

Off

Remote

100 mm

75 mm

EJECT( ): Ejects or loads the disk from DVD module.

PLAY/PAUSE( ):

Plays or pauses the DVD disk.

4. If spare parts of different speciﬁcations (such as screws) are

used during mounting, consult with qualiﬁed professionals to

make sure these parts are safe and effective.

5. Before attaching the base to wall, ensure the holes for anchors

are in keeping with the installing rules. Otherwise there may exist

some potential problems.

6. Do not place any heating source under your television. Or else,

it can cause ﬁre.

7. Do not place the TV near anything dripping. Transducers and

high voltage wires should be kept far away from the apparatus

too. Or else, it may cause creepage, electric shock or bad

resonance.

8. Do not place TV in a location where collision or vibration is

liable to happen.

9. In order to avoid unexpected falling of the TV set, do not put

any strong force on TV or wall mount after installing.

10. Be sure to unplug the TV before installing. Keep anything hard

or sharp away from the screen panel to prevent the scufﬁng.

11. After installing, if there is any need to move the cabinet, please

contact the qualiﬁed professionals.

With USB Media Play, you can enjoy music and photo ﬁles stored

in a USB storage device on your RCA TV.

Connecting a USB storage device

- Connect a USB storage device to the USB port in the back of the TV.

- Press “INPUT” and select “USB”.

- “USB Media Play” menu will appear.

1314

USB Media Play

Caution: Do not turn off the TV or disconnect USB storage device

while the TV is playing back picture or music.

This may result in loss of data or damage to the USB storage

device, and RCA is not responsible for any damage to, or loss of,

data on the USB storage device.

Notice: Specifications and cabinet design are subject to change without

notice.

Coverage - Labor

For a period of 12 months from date of purchase of your RCA

product, we will pay an authorized RCA service center the labor

charge to repair any defects in materials or workmanship in your

television.If your television is unrepairable we will provide you with a

refurbished unit of the same or better model.

Coverage - Parts

For a period of 12 months from date of purchase of your RCA

product, we will pay an authorized RCA service center for the

new,or at our option, refurbished replacement parts needed to

repair any defects in material or workmanship in your television. If

your television is unrepairable we will provide you with a refurbished

unit of the same or better model.

Coverage - LED LCD Panel

For a period of 12 months from date of purchase of your RCA

product, we will pay an authorized RCA service center for the

- Incapacidad para recibir la senal debido a los problemas

que no son causadas por el producto.

- Danos en el producto debido a las imagenes de grabadas

en la pantalla.

- Productos comprados o prestar servicios fuera del pais

de compra original.

Ej: Comprado en Estados Unidos no puede prestar

servicios en Mexico/Comprado en Mexico no puede

prestar servicios en Estados Unidos.

- Productos modiﬁcados o incorporados a otros productos.

- Danos debidos a fenomenos de la naturaleza, incluyendo

pero no limitado a, danos por rayos o inundaciones.

- Las llamadas de servicio que no impliquen cualquier

defecto en materiales o mano de obra.

Uso Comercial Exclusion

Esta garantia limitada solo se aplica a los productos utilizados

para uso personal o, y no cubre todos los productos utilizados con

ﬁnes institucionales, comerciales o de alquiler.

ESTA GARANTIA LIMITADA ES EL UNICO Y EXCLUSIVO

DE GARANTIA APLICABLE A ESTE PRODUCTO. EN

CORP EE.UU., Inc., el fabricante de este producto, rechaza

cualquier otra garantia, expresada o implicada (INCLUYENDO

TODAS LAS GARANTIAS IMPLICITAS DE COMERCIAL

IZACION O IDONEIDAD PARA UN PROPOSITO

PARTICULAR). NO informacion verbal o escrita por parte

CORP DE EE.UU., Inc., sus agentes, contratistas

independientes, representantes de ventas, empleados,

comerciantes minoristas, mayoristas o cualquier otro tercero

DEBERAN crear una garantia ni aumentar. Ampliar o

modiﬁcar el alcance de esta garantia limitada.

Esta GARANTIA LIMITADA DEL UNICO Y EXCLUSIVO REMEDIO

PARA EL CONSUMIDOR DE REPARACION O REEMPLAZO

DEL PRODUCTO. EN CORP EE.UU., Inc. no sera

responsable por danos especiales, incidentales o

consecuentes resultantes DEL USO DEL PRODUCTO O

DERIVADOS DE UNA VIOLACION garantia expresa o

implicita de este producto.

ESTA GARANTIA LIMITADA Y RESPONSABILIDADES contenida en el

se rige por las Leyes del Estado de Indiana. SALVOPROHIBIDO POR

LA LEY APLICABLE, CUALQUIER GARANTIA IMPLICITA DE

COMERCIALIZACION O IDONEIDAD PARA UN PROPOSITO

PARTICULAR ESTARA LIMITADA A LIMITADA periodo de garantia (S)

mencionado anteriormente. Esta garantia le otorga derechos legales

especiﬁcos y USTED TAMBIEN PUEDE TENER OTROS DERECHOS,

QUE PUEDEN VARIAR DE ESTADO.

RCA es una marca registrada de SAS bajo licencia de

ON Corporation

ON Corp US, Inc.

10920 Via Frontera, Ste 540

San Diego, CA 92127, U.S.A.

2014 ON Corporation

RCA is a trademark of RCA Trademark Management

SAS used under license to ON Corporation.

RCA es una marcade RCA Trademark Management

SAS usada bajo licencia de ON Corporation.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS

AND YOU ALSO MAY HAVE OTHER RIGHTS THAT VARY

FROM STATE TO STATE.

RCA is a trademark of RCA Trademark Management

SAS and used under license by ON Corporation

Cobertura-Trabajo

Durante un periodo de 12 meses desde la fecha de compra de su

producto RCA, pagaremos a un centro autorizado de servicio de RCA

el cargo de mano de obra para reparar cualquier defecto en materiales

o mano de obra en el televisor.

Si su televisor es ir reparable qu e le prop orcionar a un a u nidad

reacondicionada del mismo modelo o superior.

Cobertura / Recambios

Durante un periodo de 12 meses desde la fecha de compra de su

producto RCA, pagaremos a un centro autorizado de servicio de RCA

para un reemplazar p2-ya sea con partes nuevas o reacondicionadas, o a

nuestra opcion, para reparar cualquier defecto del material o mano de

obra en el televisor.

Si su televisor es irreparable que le proporcionara una unidad

reacondicionada del mismo modelo o superior.

Panel de Cobertura-LED LCD

Durante un periodo de 12 meses desde la fecha de compra de su

producto RCA, pagaremos un centro autorizado de servicio de RCA

para un reemplazar la pantalla LED LCD, ya sea con pantalla nueva o

reacondicionada, o a nuestra opcion, para reparar cualquier defecto del

material o mano de obra en la pantalla de su televisor. Si su televisor

es irreparable que le proporcionara una unidad reacondicionada del

mismo modelo o superior.-

Como Obtener Servicio

Para asistencia en Estados Unidos (E.U.A) si compro un aparato RCA

en E.U.A. favor dellamar al: 1-888-977-6722

o visite: www.rca.com

El representante de Servicio revisara sus opciones para el servicio.

Para su comodidad le ofrecemos tres formas de obtener servicio de

garantia.

Usted puede enviar su producto a la direccion proporcionada por

el representante de servicio, usted puede llevar su producto a un

centro de ser vicio autorizado, o puede solicitar en el servicio a

domicilio (administrador determinara si el producto se encuentre en

funcionamiento en casa o debe ser llevado de vuelta a servicio local

tecnico para su reparacion).

El representante del Servicio le proporcionara las instrucciones para el

servicio preferido.

Se requiere del comprobante de compra original.

Solo se les dara servicio a Domicilio a Televisores de 37 " pulgadas de

tamano y mas grandes.

Elementos no cubiertos por la garantia limitada Su

garantia limitada no cubre los siguientes temas:

- Un-instalacion, montaje y ajuste de controles del cliente

e instrucciones de funcionamiento.

- Las pilas y los fusibles de repuesto al cliente.

- Danos por uso indebido, abuso, negligencia o descuido

incluyendo pero no limitado a, los danos derivados

de la exposicion a la humedad, la humedad o la sal.

new, or at our option, refurbished LED LCD panel needed to repair

any defects in material or workmanship in your television. If your

television is unrepairable we will provide you with a refurbished unit

of the same or better model.

How to Obtain Service

For assistance (U.S.A) - if you purchased RCA product in

U.S.A, please call 1-888-977-6722.

Or visit www.rca.com

The service representative will review your options for service.

As a convenience we offer three ways to obtain warranty service.

You may mail your product to the address provided by the service

representative, you may take your product to an authorized service

center, or you may request in home service (servicer will determine if

product is serviceable in home or must be taken back to local service

center for repair). Service representative will supply instructions for

preferred service. At the time of service proof of purchase such as

original receipt, will be required. Only 37” LCD size and above are

applicable for in-home-service.

Items Not Covered By Limited Warranty

Your limited warranty does not cover the following items:

-Un-installation, installation and adjustment of customer controls and

operating instruction.

-Batteries and customer replacement fuses

-Damage due to misuse, abuse, negligence or neglect including but, not

limited to, damage resulting from exposure to moisture, humidity or salt.

-Inability to receive a signal due to problems not caused by the product.

-Damage to the product due to images burnt into the screen.

-Prod uct pu rchased or serviced outsi de of Country of Origin al

Purchase.

-i.e. Purchased USA can not be serviced in Mexico/Purchased in

Mexico can not be serviced in USA.

-Product modiﬁed or incorporated into other products.

-Damage due to acts of nature, including but not limited to,lightning

damage or ﬂooding.

-Serv ice calls w hich do n ot involv e any defect in materi als or

workmanship.

Commercial Use Excluded

This limited warranty only applies to products used for personal use

and does not cover any product used for institutional, commercial or

rental purposes.

THIS LIMITED WARRANTY IS THE SOLE AND EXCLUSIVE

WARRANTY APPLICABLE TO THIS PRODUCT. ON CORP US, INC.,

THE MANUFACTURER OF THIS PRODUCT, DISCLAIMS ALL

OTHER WARRANTIES, EXPRESSED OR IMPLIED (INCLUDING ALL

IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE). NO VERBAL OR WRITTEN INFORMATION

GIVEN BY ON CORP US, INC., ITS AGENTS, INDEPENDENT

CONTRACTORS, SALES REPRESENTATIVES, EMPLOYEES, RETAIL

DEALERS, WHOLE SALE DISTRIBUTORS OR ANY OTHER THIRD

PARTY SHALL CREATE A GUARANTY OR INCREASE. EXPAND OR

MODIFY THE SCOPE OF THIS LIMITED WARRANTY.

THIS LIMITED WARRANTY PROVIDES THE SOLE AND EXCLUSIVE

REMEDY FOR THE CONSUMER OF REPAIR OR REPLACEMENTOF

THE PRODUCT. ON CORP US, INC. SHALL NOT BE LIABLE FOR

SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT

OF THE USE OF THEP RODUCT OR ARISING OUT OF A BREACH

EXPRESSED OR IMPLIED WARRANTY ON THIS PRODUCT.

THIS LIMITED WARRANTY AND THE DISCLAIMERS CONTAINED

HEREIN ARE GOVERNED BY THE LAWS OF THE STATE OF INDIANA.

EXCEPT TO THE EXTENT PR OHIBITED BY APPLICABLE LAW, ANY

IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE IS LIMITED TO APPLICABLE LIMITED

WARRANTY PERIOD(S) SET FORTH ABOVE.

Humidity

RF input

Video input

Audio input

Audio output

Storage Humidity : Less than 85%RH

(No condensation)

Operation Humidity : Less than 80%RH

(No condensation)

AC 100-120V, 60Hz

Cable/Antenna × 1

AV × 1

AV × 1, PC Audio in x 1

HDMI × 1

1920 × 1080

Component × 1

Headphone × 1, Digital Audio Out × 1

Power Supply

Connection

Interface

Resolution

With stand

Without

stand

With stand

Without

stand

480i, 480p, 720p, 1080i, 1080p

22.4”W × 14.1”H × 6.7”D

22.4”W × 13.3”H × 2.7”D

7.7LBS(3.5KGS)

7.3LBS(3.3KGS)

less than 26W

Component/HDML mode

Dimensions

Weight

Power Consumption

Diagonal Display Size

Television System

Channel Coverage

Temperature

24 inches

American TV standard

Operating Temperature is

Storage Temperature is

ATSC/NTSC system

VHF : 2~13 UHF : 14~69

CATV : 1~135

-20℃ ~

+60℃

0℃ ~

+50

℃

-4℉ ~

+140℉

+32℉ ~ +122 ℉

Model

LED24G45RQD

1415

LIMITACION DE GARANTIA

Product Speci cationﬁ

LIMITATION OF WARRANTY

Limited Warranty for USA

Garantia limitada para EE.UU

Media Support Speciﬁcation

Playing back Photo ﬁles

- Press arrow ( ) to select “Photo” and press “OK”.

- The ﬁle or folder list will show up. Press arrow( ) to select a ﬁle

or folder. Press “OK” , and you will be given several options to view

photo ﬁles.

- You can directly open and playback the ﬁle. View thumbnails for

photo preview, or play slideshow.

Playing back Music ﬁles

- Press arrow ( ) to select “Music” and press “OK”.

- The ﬁle or folder list will show up. Press arrow( ) to select a ﬁle

or folder. Press “OK” to playback the music ﬁle you selected.

Supported Files

Supported USB storage/ﬁle system format

Photo

USB Storage USB ﬂash drive

File System format FAT32

Music

JPG/JPEG ﬁles

WAV ﬁles

USB 2.0

PHOTO MUSIC

• Auto Adjust: Adjust the PC picture display automatically.

• Horizontal Position: Adjust the horizontal position of picture.

• Vertical Position: Adjust the vertical position of picture.

• Clock: Adjust the clock of picture.

• Phase: Adjust the phase of picture.

• Reset: Reset all the PC picture settings to factory default.

PC Settings (only available in PC mode)

Product specificaties

Merk:	RCA
Categorie:	Televisie
Model:	LED24G45RQD
Kleur van het product:	Zwart
Gewicht verpakking:	4600 g
Breedte verpakking:	630 mm
Diepte verpakking:	134.62 mm
Hoogte verpakking:	401 mm
Beeldschermdiagonaal:	24 "
Resolutie:	1920 x 1080 Pixels
Oorspronkelijke beeldverhouding:	16:9
Ethernet LAN:	Nee
Kijkhoek, horizontaal:	170 °
Kijkhoek, verticaal:	160 °
Beeldscherm vorm:	Flat
Helderheid:	200 cd/m²
Aantal USB 2.0-poorten:	1
Aantal HDMI-poorten:	1
Audio-ingang (L, R):	1
PC audio ingang:	Ja
Composiet video-ingang:	1
Componentingang video (YPbPr/YCbCr):	1
DVI-poort:	Nee
Smart TV:	Nee
Ingebouwde luidsprekers:	Ja
Gemiddeld vermogen:	6 W
Stroomverbruik (in standby):	0.3 W
Aantal luidsprekers:	2
Hoofdtelefoonuitgangen:	1
Beeldscherm, aantal kleuren:	16.78 miljoen kleuren
Formaat analoog signaal:	NTSC
HD type:	Full HD
3D:	Nee
Display technologie:	LED
Responstijd:	5 ms
Ondersteunde grafische resoluties:	1920 x 1080 (HD 1080)
VESA-montage:	Ja
Contrast ratio (dynamisch):	1000:1
Diepte ( zonder voet ):	68.58 mm
Hoogte (zonder voet ):	338 mm
Breedte ( zonder voet ):	569 mm
Gewicht (zonder voet):	3300 g
On Screen Display (OSD)-talen:	ENG, ESP, FRE
PC-ingang (D-Sub):	Ja
Common interface Plus (CI+):	Nee
Soort tuner:	Analoog & digitaal
Formaat digitaal signaal:	ATSC
Internet TV:	Nee
Breedte apparaat (met standaard):	569 mm
Diepte apparaat (met standaard):	170 mm
Hoogte apparaat (met standaard):	358 mm
Ruisonderdrukking:	Ja
On Screen Display (OSD):	Ja
Aantal On Screen Display-talen:	3
Audio Return Channel (ARC):	Ja
Common interface (CI):	Nee
Aantal RF-poorten:	1
Mobile High-Definition Link ( MHL ):	Ja
Ondersteunde verversingsfrequenties display:	60 Hz
Digitale audio, coaxuitgang:	1
Ouderlijk toezicht:	Ja
DVD player:	Ja
Inclusief DVD speler/recorder:	DVD speler
Comb filter:	3D
Wifi:	Nee
AC-ingangsspanning:	120 V
AC-ingangsfrequentie:	60 Hz
Stroomverbruik (typisch):	26 W
Slaaptimer:	Ja