RCA LED24C45RQD Handleiding

RCA Televisie LED24C45RQD

Lees hieronder de 📖 handleiding in het Nederlandse voor RCA LED24C45RQD (7 pagina's) in de categorie Televisie. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/7

The LED LCD panel can be

scratched easily, so please:

1. Choose an absolutely ﬂat

surface to place the TV on.

2. Use soft cloth or cushion to

face the TV panel.

Do not put TV on the table

directly.

Always unplug the AC cord ﬁrst

when installing/removing the stand.

Step One

Place the TV faced down on a soft cloth or cushion to prevent the LED

LCD panel from being damaged.

TV STAND SCREWS

SCREWS

M4 x 10mm, 3pcs

Part# RS01PWA410H3

AAA BATTERIES

TV STAND BASE

M4 Screws

Class 1 Laser Product

Device complies with FDA radiation performance standards, 21 CFR

subchapter.

Caution: (Invisible) Laser Radiation when open. Do not stare into beam.

............................................................10

DVD Operations

QUICK START GUIDE

Qu ick St a rt Gu ide

USER’S GUIDE

DOCUMENTS

PATENT CARD

T he televi s io n i s c o ver ed by o n e or m o re cla im s o f th e fo ll o wi ng

Un ited S ta tes p at ent s :

· U.S . Pa tent No. 5,511,096

· U.S . Pa tent No. 5,621,761

· U.S . Pa tent No. 5,703,887

· U.S . Pa tent No. 5,745,522

· U.S . Pa tent No. 5,511,082

· U.S . Pa tent No. 5,371,902

· U.S . Pa tent No. 5,233,629

· U.S . Pa tent No. 5,408,502

· U.S . Pa tent No. 5,311,546

· U.S . Pa tent No. 5,396,518

· U.S . Pa tent No. 5,475,716

· U.S . Pa tent No. 5,537,420

· U.S . Pa tent No. 5,519,733

· U.S . Pa tent No. 5,579,348

· U.S . Pa tent No. 5,363,408

· U.S . Pa tent No. 5,321,725

Par No. RN4146AL0 5t :

Table of Contents

Caution and Warning

......................................................

Child Safety Guide

...........................................................

FCC and Class 1 Laser Product Notice

........................

.........................................

Preparation for Your New TV 3

...........................................................

Check Accessories

........................................................

Setup TV Table Stand

............................................................

Select TV Location

........................................................

Connection and Using

.......................................................

TV Stand Installation 3

.........................................................

Safety Precautions 2

......................................................

TV Signal Connection 4

..........................................................

Cable Connections 4

..................................................

Back Panel Connections 4

.....................................................

TV Jacks Explanation 5

.................................................

Keypad and Front Panel 6

.................................

Connecting AV Composite Video device

...................................

Connecting YPbPr Component device

......................................................................

Initial Setup 7

....................................................

Connecting HDMI device

..................................................... 5Connecting a Computer

.........................

How to Obtain Various Kinds of Input Sources

.............................................................

Basic Operations 7

............................................................

Turning On and Off

.........................................................

Choosing TV Channel

.......................................................

Selecting Input Source

.....................................................................

Channel Bar

..............................................................

Adjusting Volume

...........................................

EPG (Electronic Program Guide)

..................................................................

Panel Buttons

......................................................................

Front Panel

..........................................

Remote Control Instructions 6

..........................................

Inserting Batteries in the Remote

....................................

Learning about Remote Control 6

.....................................................

Remote Control Buttons

..........................................

Remote Control Reception Angle

.............................................................

USB Media Play 13

....................................................

Product Speciﬁcation 13

................................................................

Warranty Card 14

OSD Menu Operations

....................................................

......................................................

Adjust the OSD Screen

...................................................................

Picture Menu

....................................................................

Sound Menu

.................................................................

Channel Menu

.................................................................

Parental Menu

............................

Frequently Asked Questions (FAQs)

............................................................

Troubleshooting

..........................................

V-Chip Rating Explanations

..................................................

US V-Chip Rating System

.........................................

Canadian English Rating System

.........................................

Canadian French Rating System

.....................................................................

Setup Menu

..................................................................

Others Menu

.................................

Wall Mounting Unit Speciﬁcation 13

Child Safety Guide

FCC Notice

Caution and Warning

Use una montura que se p1-ha recomendado por el fabricante de monitor y/o

listado por un laboratorio independiente (como UL, CSA, ETL).

Siga todas las strucciones ofrecidas por el fabricante de monitor yin

montaje de pared.

The lightning ﬂash with arrowhead

symbol, within an equilateral triangle

is intended to alert the user to the

presence of uninsulated dangerous

voltage within the product enclosure

that may be of sufﬁcient magnitude to

consitute a risk of electric shock.

Caution: To reduce the risk of electric shock, do not

remove cover or back. No user-serviceable parts inside.

Refer servicing to qualiﬁed service personnel.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION:

CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED

BY THE PARTY RESPONSIBLE FOR COMPLIANCE WITH THE

FCC RULES COULD AVOID THE USERS AUTHORITY TO

OPERATE THIS EQUIPMENT.

Safety Precautions

FCC Information

This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to Part 15 of the FCC rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to

radio Communications. However, there is no Guarantee that

interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the

following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and the receiver.

- Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

The exclamation point within an

equilateral triangle is intended to

alert the user to the presence of

important operating and maintenance

(servicing) instructions in the literature

accompanying the TV.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water. For example, do not use

near a laundry tub, in a wet basement, or near a swimming pool,

and the like.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions. Slots and openings in the cabinet back

or bottom are provided for ventilation, to ensure reliable operation

of the TV and to protect it from overheating. These openings must

not be blocked or covered. The openings should never be blocked

by placing the TV on a bed, sofa, rug, or other similar surface.

8. Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including ampliﬁers) that

produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type

plug. A polarized plug has two blades with one wider than the other.

A grounding-type plug has two blades and a third grounding prong.

The wide blade or the third prong is provided for your safety. If the

provided plug does not ﬁt into your outlet, consult an electrician for

replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the point where

they exit from the apparatus.

11. Only use attachments/accessories speciﬁed by the manufacturer.

12. Use only with cart, stand, tripod, bracket, or table speciﬁed by the

manufacturer, or sold with the apparatus. When a

cart is used, use caution when moving the

cart/apparatus combination to avoid injury from

tip-over. A TV and cart combination should be

moved with care. Quick stops, excessive force,

and uneven surfaces may cause the TV and cart

combination to overturn.

13. Unplug this apparatus during lightning storms or when unused for

long periods of time. For added protection for this TV receiver

during a lightning storm, or when it is left unused for long periods

of time, unplug it from the wall outlet and disconnect antenna or

cable system. This will prevent damage to the TV due to lightning

and power line surges.

2 3

Preparation for Your New TV

14. Refer all servicing to qualiﬁed service personnel. Servicing is

required when the apparatus has been damaged in any way, such

as power-supply cord or plug is damaged, liquid has been spilled

or objects have fallen into the apparatus, the appratus has been

exposed to rain or moisture, does not operate normally, or has

been dropped.

15. This TV should be operated only from the type of power supply

indicated on the rating label. If customer is not sure the type of

power supply in your home, consult your appliance dealer or local

power company. For TV remote control battery power, refer to the

operating instructions.

16. The TV set shall not be exposed to dripping or splashing. No

objects ﬁlled with liquids, such as vases, shall be placed on the TV

set.

17. Never push objects of any kind into this TV through openings as

they may touch dangerous voltage or other electrical parts that

could result in ﬁre or electric shock. Never spill liquid of any kind

into the TV.

18. Unplug the TV from the wall outlet before cleaning. Do not use

liquid or aero cleaners. Use a damp cloth for cleaning.

19. This TV should never be placed near or over a radiator or heat

resource. This TV should not be placed in a built-in installation such

as a bookcase or rack unless proper ventilation is provided or the

manufacturer's instructions have been adhered to.

20. Do not place this TV on an unstable cart, stand, tripod, bracket, or

table. The TV may fall, causing serious injury to someone, and

serious damage to the appliance.

21. Do not attempt to service this TV by yourself because opening or

removing covers may expose you to dangerous high voltage or

other hazards. Refer all servicing to qualiﬁed service personnel.

22. This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) this device may not

cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause

undesired operation.

23. WARNING: To prevent injury, this apparatus must be securely

attached to the ﬂoor/wall in accordance with the installation

instructions.

24. To reduce the risk of electric shock, the grounding of center pin of

plug must be maintained.

25. If an outside antenna or cable system is connected to the TV, be

sure the antenna or cable system is grounded to provide some

protection against voltage surges and built-up static charges.

Section 810 of the National Electrical Code, ANSI/NFPA NO.70,

provides information with respect to proper grounding of the mast

and supporting structure, grounding of the lead-in wire to an

antenna discharge unit, size of grounding conductors, location of

antenna discharge unit, connection to grounding electrodes, and

requirements for the grounding electrodes. (See ﬁgure A)

Safety Strap

Caution: Pushing, pulling or climbing on the TV may cause the TV

falling. Do not let chlidren climb or hang on the TV. Always place the TV

on a sturdy, level, stable surface that can hold the weight of TV. And if

possible, secure the TV according to the instruction below (Note: The

fastening components such as screws are not supplied with TV).

ANTENNA

LEAD IN

WI RE

GR OUN D CL A MP

GR OUN DING CONDU CTO RS

(NEC S E CTI O N 810-21)

GR OUN D CL A MPS

POWER S E RVICE G ROUND I NG

ELECTRO DE SYST E M

(NEC A RT 2 5 0, P ART H)

ELECTRI C SERV I CE

EQU I PME NT

ANTENNA

DI S CHA RGE UNIT

(NEC S E CTI O N 810-20)

Figure A

Figure B Figure C

Note: Above accessories are subject to change without notice.

Before Turning On TV

Check Accessories

Check the accessories that are packed with your TV.

Select TV Location

Select a ﬂat, stable table to place your TV set. Please follow the Safety

Instructions when placing the TV.

Setup TV Table Stand

Please refer to TV Stand Installation guide in next page to carry out

stand installing.

Connection and Using

After placing your TV properly, you can connect the TV with power

supply and cable components. For further information, see page 4 to

page 5.

TV Stand Installation

TV LED24C45RQD is packaged with the TV stand separated from the

cabinet. To setup the TV table stand, please carry out the installation

according to the instructions below.

Step one: Insert the M4 mounting screws into the upper two wall

mounting screw holes and fasten them (Figure B).

Step two: Insert anchors to wall and connect the bolts and anchors

with ropes or chains (Figure C).

Part No.: RN0324R1007

Please register your product at www.rca.com

English

Please keep your sales receipt and keep the record of

the serial number and the date of purchase in order to

receive warranty parts and service.

The serial number is located at the back of the TV.

Made for Today.

PART NO.: RE20QP83

REMOTE CONTROL

PICTURE

SOUND

Model Number.

LED24C45RQD

Wall

Mo del Number.

LED24C45RQD

LED LC D T V

DVD C O MB INAT I ON

Use r ’s M a nua l

Part No.: RN03 24 R10 07

Ple ase re g iste r your product at ww w.rca .com

Englis h

Ple ase ke e p y our sale s re ce ipt and ke e p the re c ord of

the se rial numbe r and the date of purchase in orde r to

rec e ive w arranty parts and servi ce .

The se rial numbe r is loc ate d at the bac k of the TV.

Step Two

Take the base. Please align three holes of the base and three

screwholes of the neck, insert the base to the neck, and then insert the

3 screws and tighten them.

The bottom view of the TV

(Front cabinet faces down)

Please take note of the base direction:

RS01PWA410H3

Pedestal

Screws Quantity Part #

3pcsM4 x 10mm

20 feet

Remote Control Sensor

Power/Standby Indicator

Audio

L R

Audio

L R

Video

YPbPr

HDMI

The output panel of other device

POWER ( ): Turns the TV on or off.

MUTE ( ): Reduces the TV volume to its minimum level. Press again

to restore the volume.

Numeric Buttons: Use these buttons to enter numbers.

“ ”: To enter a digital channel with a sub-channel, enter the main

channel; then, press this button to enter the sub-channel and press

ENTER.

Arrows ( / / / ): Uses the four arrows to highlight different

items in the TV menu or change the value. The up/down arrow can

also work as CH /CH button, and the left/right arrow can also work

as VOL-/VOL+ button.

Recall ( ): Returns to the previous channel.

EPG: Shows Electronic Program Guide (see page 8).

I Accesses the available input channels (TV, AV, Component, NPUT:

HDMI, PC, Media). Use the arrows to highlight options, and press

ENTER to select.

ENTER: Enter and conﬁrm button.

MENU: Accesses the Main Menu, or return to the upper level of a

sub-menu.

EXIT: Exits the current menu or function.

VOL+ or VOL-: Increases or decreases the TV volume.

CH or CH : Scans up or down through the current channel list.

Press once to change the channel up or down; press and hold to

Remote Control Buttons

HDMI/DVI

COMPONENT Y, Pb, Pr

L-AUDIO-R

COMPOSITE

L-AUDIO-R

Learning about Remote Control

• Are the polarities (+, -) correct?

• Are the batteries worn out?

• Is there an AC power failure?

• Is the power cord plugged in?

• Is there any interference or block near the remote control sensor?

If the remote control does not work, check these points:

• Used batteries should be recycled.

• Keep out of children’s reach.

• DO NOT use new and old batteries together.

• Change both the batteries at the same time.

• When not using the remote control for a long time, remove the

batteries from the unit.

CAUTION:

Universal Remote Control Code List

For Universal Remote Control brands listed below, please use ac

companying codes and refer to your Universal Remote Control User

Manual for basic Instruction for changing TV code to operate the TV

model.

Codes for DIRECTV: 0178, 10178

Codes for Time Warner Cable: 0178, 10178

Codes for Cox Communications: 0178

Codes for Comcast: 10178

Codes for Dish Network: 627

Codes for Fios Verizon: 0205, 0057, 0493, 0775

Remote Control Reception Angle

Use your remote control within the distance and angle range shown

below.

100-120V

60Hz

ANT/

CABLE

AC Power Cord

(Connect after all the other connections are done.)

AntennaCable TV

WALL

OUTLET

The ﬁrst step in connecting your TV is obtaining the signal. Your TV

LED24C45RQD has a back panel, which allows you to receive analog

and/or digital television channels via ANT/CABLE jack.

Before connecting your TV, determine using an antenna or a cable

service to obtain the signal.

A. Antenna

Connect the antenna to TV via coaxial cable on ANT/CABLE jack

of the back panel. You are ready to receive air local digital and

analog channels.

B. Cable TV service

Connect the cable TV wall jack to TV via coaxial cable on

ANT/CABLE jack of the back panel. You are ready to receive

off-air local digital and analog channels.

C. Set-Top Box

If you use a set-top box, you may need to call your cable company

or satellite service provider, which use a special connection, please

refer to the user’s guide of set-top box.

Note: Do not plug the AC cord until you have accomplished

all the connections.

TV Signal Connection

Back Panel Connections

Jacks Cables Further

Information

Audio Cable

COMPONENT video cable

Video/Audio cable

See the below

Go to page 5

HDMI cable

HDMI-DVI cable

Cable Connections

Choose Your Connections

TV LED24C45RQD supports various connections to other

devices (such as DVD, VCR, Set-top box, etc.). Please follow the

table to choose the cables which adapt to your device.

Note:

HDMI, the HDMI logo, and High-Deﬁnition Multimedia Interface

are trademarks or registered trademarks of HDMI Licensing LLC

Caution:

Unplug the AC cord when you connect other devices to TV.

Connecting AV Composite device

(Good Video Quality)

Composite connector will be shared with Component Y connector.

To connect a composite AV device, such as a DVD player, follow these

steps:

1.Connect the COMPOSITE jack on the back of TV to the video output

jacks of device via video cable (yellow).

2.Connect the L-AUDIO-R jacks on the back of TV to the audio

output jacks of device via audio cable.

Notice the left channel jack and plugs are white and the right

channel jack and plugs are red.

Composite Video Connection

The picture below is an example of a connection using the

composite video jack.

The back of TV

Note: AV signal belongs to composite video. This kind of video signal

has regular good display quality.

TV Jacks Explanation

Connecting YPbPr Component device

(Better Video Quality)

To connect a component device, such as a DVD player, follow these

steps:

1.Connect the COMPONENT IN Y/Pb/Pr jack on the back of TV to the

video output jacks of device via video cable (green, blue and red).

2.Connect the L-AUDIO-R jacks on the back of TV to the audio

output jacks of device via audio cable.

Notice the left channel jack and plugs are white and the right channel

jack and plugs are red.

Component Video Connection

The picture below is an example of a connection using the component

video jack.

Note: Y/Pb/Pr jacks are component video. This kind of video signal has

better display quality.

Connecting HDMI device

(Best Video Quality)

HDMI Connection

The picture below is an example of a connection using the HDMI video

jack.

To connect a HDMI device, such as a DVD player, please Connect the

HDMI/DVI jack on the back of TV to the output jacks of device via

HDMI cable.

To connect a DVI device, via DVI port of PC or Device and HDMI

jack of TV:

1. Connect the HDMI/DVI jack on the back of TV to the DVI port of

PC via HDMI-DVI cable.

2. Connect the SOUND/DVI jack on the back of TV to the audio

output jack of computer with audio cable (3.5mm stereo jack to

dual-channel RCA jacks or SOUND/DVI jack).

Note: 1. HDMI (High-Definition Multimedia Interface) is a compact

audio/video interface for transmitting uncompressed digital data. It

carries the audio and video signal via the same cable and has the best

display quality.

2. HDMI-DVI cable transfers only video signal from DVI port of

DVI device to HDMI jack of TV. For audio signal, please connect audio

output to SOUND/DVI jack on TV back panel.

How to Obtain Various Kinds of Input Sources

After connection is done, press INPUT button on remote control or TV

top panel to choose the input source you need. See page 7, Basic

Operation of TV.

USB: Connect your USB storage device to enjoy music/

photo ﬁles on your TV. (Also used for service purpose).

HDMI/DVI: (High-Deﬁnition Multimedia Interface) It

provides an uncompressed digital connection that carries

both video and audio data by way of an integrated

mini-plug cable.

COMPONENT Y/Pb/Pr: Connect a device that has

component video jacks, such as a DVD player. To access

device connected to the Y/Pb/Pr jack, press the INPUT

button on your remote; then press the up/down arrow to

select Component. Press the ENTER button at last to

conﬁrm.

• Y/Pb/Pr (Component Video): They provide good

picture quality because the video signal is separated into

three components. Use three video-grade or component

video cables for the connection. When using Y/Pb/Pr,

make sure you connect left and right audio cables to the

L-AUDIO-R jacks.

L-AUDIO-R, COMPOSITE: Connect an AV device that

Initial Setup

Step Two

Please select the TV installation mode, press

the up/down arrow select the mode you

need: Home, Retail. If you select Home

mode, the next option is step three. If you

select Retail mode, please refer the step four.

If it is the ﬁrst time you turn on your TV, or you have done Clear

Channel List option (see page 9), the initial setup menu appears

automatically.

Step One

Please select Menu Language, press the

up/down arrow select the language you

need. Available languages: English, Spanish

and French.

Step Four

To choose your TV tuner signal type, press the up/down arrow select

the signal type: Air, Cable.

Note: please select TV signal type according to the antenna or cable

closed circuit TV you use.

Step Three

Please choose between Energy Saving and

Dynamic mode. You can save more energy

with Energy Saving.

What to notice:

1. The channel search access starts from the Analog TV channel

searching and ends at Digital TV channel searching.

2. The channels that have been found will be stored automatically.

3. You can press MENU button to skip analog/digital channel

searching.

4. You can press ENTER/EXIT button to end the channel searching.

Step Five

If you accomplish the initial setup, the TV will search channels

automatically.

Initial Setup

Initial Setup Wizard will assist you in configuring

basic Settings

Press ENTER/RIGHT to go to next page

MOVE SELECT : Exit

Tuning To Analog Channels

An analog channel has a channel number beginning with “A”. Input the

digital number with numeric buttons directly and press ENTER button

to conﬁrm.

For example, to watch analog channel “A51”, press “5”, “1”, “ENTER”

on remote control in sequence.

Note: Although there is no analog TV signal available in America, we

reserve ATV functions for some expansible use.

Tuning To Digital Channels

A digital channel has a channel number beginning with “D”. Input the

main digital number with numeric buttons directly, then press “ ”

button on remote control, and input the sub number at last.

For example, to watch analog channel “D31-1”, press “3”, “1”, “ ”,

“1”, “ENTER” on remote control in sequence.

Choosing TV Channel

Basic Operations

Turning On and Off

Connect the AC cord to power the LED LCD TV. At this time the TV

will enter standby mode and power indicator will turn red. Use Power

button ( ) on the top panel of TV or on the remote control to turn on

the TV. After switching off the TV for 5 seconds, you can turn on TV

again.

Selecting Input Source

Press INPUT button on remote control to

display Source Select list.

Use up/down arrows to highlight the source

you need and press ENTER to conﬁrm.

Media

DVD

Source Select

HDMI

Component

Changing Channels Directly

You can use CH button to increase channel number and CH to

decrease channel number. When no OSD (On Screen Display) is used,

the up/down arrows can also work as CH /CH buttons.

Channel Bar

Press the DISPLAY button on the remote control, the channel bar will

appear on the top right corner of the screen. It displays the current

channel’s information. The following list describes the items on the

channel bar.

Mono

480i

Air

Oct-31 23.14 Mon

MTV

ATV

English

KOCE-HD

D50

1080i

Oct-31 23:14 Mon

Air

DTV

A2/D50-1 If the channel is analog, A is displayed. If it’s a

digital channel, D is displayed. For example, in the

pictures above, A2 is an analog channel, and

D50-1 is a digital channel ( -1 is a sub-channel

number).

MTV/KOCE-HD Displays the channel label.

Mono/English Displays whether the current channel is being

broadcasted in stereo or mono. If the current

channel is digital, this space will be SAP (Second

Audio Program) language.

480i/1080i Displays the signal resolution.

16:9/CC/TV-PG Displays the screen aspect ratio, closed caption

and TV rating level of the current program or

channel. These are only available for digital

channels.

Oct-31 23:14 Mon Displays current date and time.

Adjusting Volume

Press the VOL+/VOL- button on the remote control to adjust the

volume. If you want to switch sound off, press MUTE ( ). When OSD

(On Screen Display) is not used, the arrows left/right can also work as

VOL-/VOL+ buttons.

Remote Control Instructions

Power/Standby Indicator: Light up in red when the TV is in standby

mode. Light out when the TV is on.

Remote Control Sensor: Remote control IR sensor, which receives

infrared ray sent by remote control.

Keypad and Front Panel

Keypad Buttons

If you cannot locate your remote, you can use the keypad buttons on

your TV to operate many TV features.

Front Panel

About remote control working distance and angle, see the right side.

INPUT: Displays the Source Select List.

MENU: Displays the TV Main Menu.

CH : Scans up through the channel list. In the TV menu system, it acts

like the up arrow on the remote control and can be used to select

menu options.

CH : Scans down through the channel list. In the TV menu system,

it acts like the down arrow on the remote control and can be used to

select menu options.

VOL+: Increases the volume. In the TV menu system, it acts like the

right arrow on the remote control and can be used to select menu

options.

VOL-: Decreases the volume. In the TV menu system, it acts like the

left arrow on the remote control and can be used to select menu

options.

POWER ( ): Turns the TV on and off.

Inserting Batteries in the Remote

• Remove the cover of battery cabin on the back of the remote control

by pushing the tab and sliding the cover.

• Insert two AAA batteries, making sure the polarities (+ and -) are

aligned correctly.

• Place the cover back.

Audio

L RVideo

HDMI

The output panel of other device

Audio

L R YPbPr

The back of TV

The output panel of

other AV device

DVI

Speaker or

headphone

Audio Out

L R

DVI

The back of TV

Audio

L R

Audio

L R YPbPr

Video

HDMI

The output panel

of HDMI device

Audio cable with

3.5mm terminal

VGA cablePC INPUT VGA, SOUND/DVI

Connecting a computer

To connect a computer, follow these steps:

1.Connect the VGA port on the back of TV to the VGA output jack of

device via D-sub 15-pin cable.

2.Connect the SOUND/DVI jack on the back of TV to the audio output

jack of computer with audio cable (3.5mm).

PC Connection

The picture below is an example of a connection using your TV as a

PC monitor.

Note: If you want to use your TV as a monitor, please notice that the

maximum resolution for LED24C45RQD is 1920*1080. Please set the

computer graphic correctly.

The back of TV

VGA Speaker or

headphone

has composite video jacks, such as a VCR or a DVD player. To access

device connected to these jacks, press the INPUT button on your remote;

then press the up/down arrow to select AV. Press the ENTER button at

last to conﬁrm.

• AUDIO IN L: Left audio channel connection. The left audio connector

is usually white. For mono audio sources, be sure to use the left AUDIO

INPUT.

• AUDIO IN R: Right audio channel connection. The right audio

connector is usually red.

VGA: Connect your computer or other device with a VGA output to this

jack using a 15-pin, D-sub cable.

SOUND/DVI: Use to obtain sound when a PC or DVI device is connected

to the VGA/HDMI input. Use 3.5mm stereo mini-pin cable to connect PC

or DVI divece to TV .

ANT/CABLE: Connect to receive the signal from your antenna or cable

via coaxial cable.

HEAD PHONE: Connect a 3.5mm headphone for personal audio.

AC: AC power cord.

HDMI/DVI

continue changing channels.

PICTURE: Switches between the preset

picture mode (see page 8).

SOUND: Switches between the preset sound

mode (see page 8).

ASPECT: Switches between the preset

screen size mode (see page 8).

DISPLAY: Displays the Channel Bar (see

page 7).

CC: Selects the closed caption.

MTS: Selects the multi-channel television

sound.

SLEEP: Selects the sleep timer, after which

the TV will shut off automatically.

FAV.: Adds the current channel to your

favorite list, or erases the current channel

from your favorite list (if this channel is a

favorite channel already).

FAV.+ or FAV.- : Scans up or down through

the current favorite channel list.

PAUSE/FREEZE: Freeze the current screen

frame, press again to return to normal.

EJECT ( ): Ejects or loads the disk from DVD

module.

PLAY ( ): Plays the DVD disk.

PAUSE/FREEZE ( ): Freezes the current

screen frame (TV mode), or pauses the DVD

playing (DVD).

STOP ( ): Stops the DVD playing.

PREV ( ): Goes back to the previous

chapter of DVD.

NEXT ( ): Skips to the next chapter of DVD.

FR ( ) or FF ( ): Fast review or fast forward.

DVD-M: Returns to DVD boot menu.

ZOOM: Zooms the size of screen.

A-B: Sets the A-point to B-point repeating.

TITLE: Returns to DVD title menu.

SETUP: Displays the DVD-setup menu.

REPEAT: Selects the repeating mode.

SUB-T: Selects the DVD subtitle.

AUDIO: Selects the DVD audio language.

Note: For DVD control and operation details, see page 10.

Remote control part number

RE20QP83

PICTURE

SOUND

HDMI/DVI

Longer side

Product specificaties

Merk:	RCA
Categorie:	Televisie
Model:	LED24C45RQD
Kleur van het product:	Zwart
Gewicht verpakking:	6970 g
Breedte verpakking:	645.16 mm
Diepte verpakking:	127 mm
Hoogte verpakking:	459.74 mm
Beeldschermdiagonaal:	24 "
Resolutie:	1920 x 1080 Pixels
Oorspronkelijke beeldverhouding:	16:9
Ethernet LAN:	Nee
Ondersteunde video-modi:	480i,480p,720p,1080i,1080p
Kijkhoek, horizontaal:	170 °
Kijkhoek, verticaal:	160 °
Beeldscherm vorm:	Flat
Aantal USB 2.0-poorten:	1
Aantal HDMI-poorten:	1
PC audio ingang:	Ja
Composiet video-ingang:	1
Componentingang video (YPbPr/YCbCr):	1
DVI-poort:	Nee
Smart TV:	Nee
Ingebouwde luidsprekers:	Ja
Gemiddeld vermogen:	6 W
Stroomverbruik (in standby):	1 W
Aantal luidsprekers:	2
Hoofdtelefoonuitgangen:	1
Certificering:	UL/FCC
Formaat analoog signaal:	NTSC
HD type:	Full HD
3D:	Nee
Responstijd:	6.5 ms
VESA-montage:	Ja
Contrast ratio (dynamisch):	1000:1
Diepte ( zonder voet ):	50.8 mm
Hoogte (zonder voet ):	368.3 mm
Breedte ( zonder voet ):	581.66 mm
Gewicht (zonder voet):	5900 g
PC-ingang (D-Sub):	Ja
Common interface Plus (CI+):	Nee
Soort tuner:	Analoog & digitaal
Formaat digitaal signaal:	ATSC
Internet TV:	Nee
Geluidsmodi:	Dynamic,Standard
Breedte apparaat (met standaard):	581.66 mm
Diepte apparaat (met standaard):	160.02 mm
Hoogte apparaat (met standaard):	411.48 mm
Common interface (CI):	Nee
Digitale audio, coaxuitgang:	1
Ouderlijk toezicht:	Ja
Comb filter:	3D
Wifi:	Nee
AC-ingangsspanning:	110 V
AC-ingangsfrequentie:	60 Hz
Stroomverbruik (typisch):	48 W
Slaaptimer:	Ja