RC4WD Z-E0106 Handleiding

RC4WD Batterij-oplader Z-E0106

Lees hieronder de 📖 handleiding in het Nederlandse voor RC4WD Z-E0106 (1 pagina's) in de categorie Batterij-oplader. Deze handleiding was nuttig voor 9 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/1

Battery Charging

Input Voltage

Output Current

Charging Model

Charging Capability

100VAC~240VAC

650MA

pre-charged, steady current,

monitoring, automatic protection

5-8 NiMH batteries

SPECIFICATIONS

WARNING

The charger can get hot during use. Use the charger in a well ventilated area, away from people and electrically conductive

or inflammable materials.

If the battery has suspicious reactions during the charge or discharge, such as overheating, venting or leaking, immediately

disconnect the battery and store it in a safe location, away from people and inflammable materials.

This charger is designed to charge only 5~8 Cell NiMH batteries.

Make sure that the battery is compatible with the charger’s charge

rate.

Never let children operate unsupervised while charger is in use.

Adult supervision is recommended at all times.

The charger is for indoor use only. Do not use in case of high humidity

conditions or condensation.

Do not attempt to open or modify the charger’s case.

Do not let objects or liquids penetrate the charger’s cooling vents.

1. Charge only batteries that are cool to the touch and are not

damaged (swollen, bent, broken or punctured).

2. Connect the charger to the proper wall receptacle noting

proper polarity.

3. Plug the battery’s connector into the charger’s connector.

The LED will light red as it is charging.

4. The charger will emit a tone and the LED will change to

green once fully charged. NOTE: Monitor the battery during

the charge and end the charging process if the charger or

battery becomes very hot.

5. Always unplug the battery from the charger immediately

upon completion of charging.

CAUTION: Overcharging a battery can cause a fire.

RC4WD Universal NIMH Peak

Battery Charger Instructions

CAUTION Please read these instructions

carefully prior to using!

100-0072

Product specificaties

Merk:	RC4WD
Categorie:	Batterij-oplader
Model:	Z-E0106
Kleur van het product:	Zwart
Gewicht:	128.7 g
Snoerlengte:	1.11 m
Soort:	Batterijlader voor binnengebruik
Type stroombron:	AC
Ondersteund aantal accu's/batterijen:	1
Ingangsspanning:	100-240 V
Output current:	1.5 A
Compatibele batterij technologiën:	Nikkel-Metaalhydride (NiMH)
Type oplader:	Binnen
Lader compatibiliteit:	Universeel
Plug adapter:	Ja