Quoizel Blaze PCBZ1620C Handleiding

Quoizel Verlichting Blaze PCBZ1620C

Lees hieronder de 📖 handleiding in het Nederlandse voor Quoizel Blaze PCBZ1620C (2 pagina's) in de categorie Verlichting. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/2
1of2
Assembly Instruction Sheet #IS-PCBZ1620C
For Style PCBZ1620C
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
, .
. .
Package Contents
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
2018 QuoizelInc.
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-800-645-3184
or visit us on-line at www.quoizel.com
A
ReleasedDate:2018-03-13
CFixture Body
x 1
Crossbar
Assembly
x 1
Please go to for product cleaning tips. Go to the selection.
LED 29W
20-30 minutes
Identify and inspect all parts before beginning installation. Check package content list and diagrams below to ensure all parts are
present. If any parts are missing or damaged, do not attempt to assemble, install, or operate the fixture. Contact customer service for replacement
parts.
www.quoizel.com Care + Maintenance
Light Source:
Estimated Assembly Time:
Preparation:
Tools Required: Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses.
STEP 1 -Install the Crossbar Assembly to Outlet Box and Adjust
the length of the Nipple
A. Attach the Crossbar Assembly (A) to the Outlet Box with the head of
the Green Ground Screw facing you. Secure it with Outlet Box
Screws (not included), tighten until snug
B. Adjust the hex nut and lock washer underside of the crossbar to the
middle of the nipple.
C. Place the Fixture Body (C) over the nipple against the ceiling to
determine the correct position of the nipple. Thread the Knob (B)
onto the nipple. Adjust the nipple to allow the Fixture Body (C) to rest
against the ceiling when held in place by the Knob (B).
D. Remove the Knob (B) and the Fixture Body (C). Tighten the lock
washer and the hex nut against the crossbar to secure in place.
.
Outlet Box Screw
(not included)
Hex Nut and
Lock Washer
Outlet Box
Green Ground Screw
Figure 1
Nipple
DPanel
x 1
BKnob
x 1
A
B
C
STEP 2 - Wire Connections
A. Wrap bare or green ground wire around green ground screw on the
crossbar, no less than 2 inches from the end of the wire. Tighten the
green ground screw.
B. Use standard wire connectors (not included) to make all wire
connections. Twist connectors until wires are tightly joined together.
Wrap each connection with approved electrical tape and carefully
stuff all the connected wires into the Outlet Box.
Figure 2
Green Ground Screw
on the Crossbar
White wire
from outlet box White wire
from fixture
Black wire from
outlet box (or Red)
Black wire
from fixture
Bare, or Green
Ground wire
from outlet box
Ground wire
from Fixture
STEP 3 Install Fixture Body-
A. Carefully tuck all wires into the outlet box and position the Fixture
Body (C) over the outlet box. Attach the Fixture Body (C) over the
nipple and secure with the Knob (B). Hand tighten until snug.
C
Outlet Box
Figure 3
Nipple
B
2of2
2018 QuoizelInc.
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-800-645-3184
or visit us on-line at www.quoizel.com
ReleasedDate:2018-03-13
STEP 4 Attach Panel to Fixture Body-
A. Remove lock screws with rubber washers from Fixture Body (C).
B. Attach the Panel (D) onto Fixture Body (C) with crystal beads on the
Panel (D) against the Fixture Body (C). Secure the Panel (D) by
threading lock screws with rubber washers back into lock rods and
hand tighten until snug.
Your fixture is now assembled and ready to use. Enjoy!
C
D
Lock Screw
Figure 4
Lock
Rod
Rubber Washer
PCBZ1620C
FINISH: POLISHED CHROME
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/4"
20.5” Dia.
19” Dia.
3"

Product specificaties

Merk: Quoizel
Categorie: Verlichting
Model: Blaze PCBZ1620C

Heb je hulp nodig?

Als je hulp nodig hebt met Quoizel Blaze PCBZ1620C stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Verlichting Quoizel

Quoizel

Quoizel Lansdowne LANS8618MBK Handleiding

30 September 2024
Quoizel

Quoizel Regency RGN8617WS Handleiding

30 September 2024
Quoizel

Quoizel Desmond DES8624MBK Handleiding

30 September 2024
Quoizel

Quoizel Elias PCEIA8532MBK Handleiding

30 September 2024
Quoizel

Quoizel Platinum PCDV8603C Handleiding

30 September 2024
Quoizel

Quoizel Bartley BART8616MBK Handleiding

30 September 2024
Quoizel

Quoizel Haverfield HAV8624C Handleiding

30 September 2024
Quoizel

Quoizel Haverfield HAV8633C Handleiding

30 September 2024
Quoizel

Quoizel Devon Court DEVN8624MBK Handleiding

30 September 2024
Quoizel

Quoizel Pensbury PEN8616MBK Handleiding

30 September 2024

Handleiding Verlichting

Nieuwste handleidingen voor Verlichting

Nitecore

Nitecore HA15 UHE Handleiding

30 December 2025
Nitecore

Nitecore NPL25 GL Handleiding

30 December 2025
Genaray

Genaray Bright Beast TIR-1X1B Handleiding

27 December 2024
Genaray

Genaray Quad Sun QS-1X4 Handleiding

27 December 2024
Aputure

Aputure STORM 1200x Handleiding

24 December 2024
Kogan

Kogan KAABLGTBARD Handleiding

23 December 2024
Kogan

Kogan KASMCRTNLTA Handleiding

23 December 2024
LumenRadio

LumenRadio CRMX Galileo MAX Handleiding

21 December 2024
Showtec

Showtec Performer Fresnel 2200 DDT Handleiding

21 December 2024
Showtec

Showtec AirDrive 2.4 IP Handleiding

21 December 2024