QTX QS15A Handleiding

QTX Speaker QS15A

Lees hieronder de 📖 handleiding in het Nederlandse voor QTX QS15A (18 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 17 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/18
QS Series
Active Speaker Cabinets
Order ref: QS12A (178.565 ) UK
QS15A (178.569UK)
User Manual
VERSION 1.1
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
178.8 , 178.8 User Manual47UK 48UK
Introduction
Thank you for choosing the QS series active speaker cabinet Please read this manual prior to use. .
The QS active speaker range has been designed to serve many varied applications, delivering clear,
powerful sound reinforcement wherever it is needed.
Package Contents
Please check the contents to ensure that the product has been received in good condition.
• QS series active speaker cabinet
• Mains power lead
• User manual
If you find any accessory is missing or the product has arrived with any problems, please contact your
retailer at once.
This product contains no user-serviceable parts so make no attempt to try to fix or modify this item
yourself as this will invalidate the warranty. We recommend you keep the original package and proof of
purchase for any possible replacement or returned demand.
Warning
To prevent the risk of fire or electric shock, do not expose this appliance to rain or moisture. To prevent
electric shock do not remove the cover. No user serviceable parts inside. Refer servicing to qualified
service personnel.
Safety
Prior to connecting mains, ensure that the supply voltage is correct and the mains lead is in good
condition.
Avoid ingress of water or particles into the enclosure.
If the mains fuse blows, refer the unit to qualified service personnel
Placement
Keep the unit out of direct sunlight and away from heat sources.
Place the unit in an upright position during use and storage.
Keep the unit away from moisture or dusty environments.
Cleaning
Use a soft cloth with a neutral detergent to clean the cabinet, panel and controls.
To avoid damage, do not use solvents to clean this equipment.
178.565 , 178.569 User Manual UK UK
Rear Panel Layout
Connection
With master LEVEL control turned down and power switch off, connect the IEC mains lead ed
to an appropriate mains outlet.
If a microphone is to be connected directly into the QS active speaker, connect it to either
input 1 or 2 via XLR or 6.3mm jack.
Connect any line level signal (e.g. MP3 player or CD player) or mixer output to the line input
either via XLR or twin RCA lead.
If the combined input signal is to continue to further active speakers, connect these from the
LINE OUT from either the XLR connector or 6.3mm jack.
Operation
BASS and TREBLE controls should remain pointing vertically (12-o-clock position) .
With all 3 input LEVEL controls turned fully down, press the power switch on and turn the
master LEVEL control up gradually part way. For each input, gradually turn up the LEVEL
control until the required volume is achieved.
1.
6.3mm jacks for microphone inputs 1+2
2.
XLR connectors for mic inputs 1+2
3.
LEVEL controls for mic inputs 1+2
4.
R+L RCA inputs (summed) for line input
5.
LEVEL volume control for line input –
6.
XLR connector for line input
7.
LEVEL master volume control –
8.
TREBLE master treble EQ control –
9.
BASS master bass EQ control –
10.
CLIP signal overload indicator –
11.
Power on indicator
12.
POWER mains on/off switch –
13.
IEC mains inlet with fuse
14.
XLR line output
15.
6.3mm jack line output


Product specificaties

Merk: QTX
Categorie: Speaker
Model: QS15A

Heb je hulp nodig?

Als je hulp nodig hebt met QTX QS15A stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker QTX

Handleiding Speaker

Nieuwste handleidingen voor Speaker