QTX PAV8 Handleiding

QTX Speaker PAV8

Lees hieronder de 📖 handleiding in het Nederlandse voor QTX PAV8 (8 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
PAV-Series
Stereo Portable PA Set
Order ref: 178.859 178.869UK UK
User Manual
Version 1.1
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
178.859 , 178.869UK User ManualUK
Introduction
Thank you for choosing the PAV- ries stereo portable PA, which has been designed to provide a complete wire-free sound se
solution for a wide range of applications. Please read this manual fully to understand the various features on the unit and
get the best results from this product.
Package Contents
Please check the contents to ensure the product has been received in good condition with the following .
• Main portable PA speaker unit
• Satellite speaker with 6.3mm jack connection lead
• 2 x UHF handheld microphones
• I.R. remote control handset
• Power adaptor with appropriate Fig.8 mains lead(s)
If any accessory is missing or the product has any problems, please contact your retailer at once.
Warning
This product contains no user-serviceable parts so make no attempt to try to fix or modify this item yourself as this will
invalidate the warranty. We recommend you keep the original package and proof of purchase for any possible replacement
or returned demand. To prevent the risk of fire or electric shock, do not expose this appliance to rain or moisture. To
prevent electric shock do not remove the cover. No user serviceable parts inside. Refer servicing to qualified service
personnel.
Safety: Labelling Conventions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
This symbol indicates that dangerous voltage constituting a risk of electric shock is present
within this unit
This symbol indicates that there are important operating and maintenance instructions in the
literature accompanying this unit.
Prior to connecting mains, check the supply voltage is correct and the mains lead is OK.
Avoid ingress of water or particles into the enclosure.
If the mains or D.C. fuse blows, refer the unit to qualified service personnel
Placement
Keep the unit out of direct sunlight and away from heat sources.
Keep the unit away from moisture or dusty environment s.
Mount the unit on a stable surface, 35mm pole mount or suspend using the integral flying points.
Ensure that any supporting structures have adequate load capacity for the weight of the unit.
Cleaning
Use a soft cloth with a neutral detergent to clean the cabinet, panel and controls. To avoid damage, do not use solvents.
178.859 , 178.869UK User Manual UK
Main unit rear panel
1. USB port
2. Media player controls
3. CD/DVD disc slot
4. Treble EQ control
5. Echo control
6. Wired mics/guitar volume
7. UHF mic. A volume
8. UHF mic. A+B power & RF LEDs
9. Line output 2 x RCA
10. DC power input jack
11. Power on/off
12. Media player display
13. SD/MMC card slot
14. Bass EQ control
15. Main volume control
16. VCV voice controlled volume on/off
17. Contour tone shaping for UHF mics
18. UHF mic. B volume
19. 6.3mm mic.1/guitar jack input
20. 6.3mm mic.2 jack input
21. 3.5mm stereo Aux input
22. Line input L+R RCA
23. RCA composite video out
24. Battery & power status LEDs
25. 6.3mm satellite speaker out
Portability
For transport purposes, the PAV-series main unit has a retractable handle and wheels. The
satellite speaker can be stacked on top of the main unit (ensuring that the feet locate onto the
posts at the top of the main unit) and a strap is provided to secure the satellite speaker to the
extended handle, allowing the whole set to be rolled as a trolley.
Care should be taken to avoid uneven terrain or dragging the trolley too quickly, which may
damage the wheels or cause the set to overbalance.
Setting up
The PAV-series PA set is based around a main portable PA unit and a satellite speaker. Each can
be free standing or mounted onto 35mmØ speaker poles. Open the rear panel on the satellite
unit by removing the 4 thumb screws and use the speaker jack lead inside to connect the
6.3mm input on the satellite to the Speaker Out jack ( ) on the main unit. The rear cover may 25
then be put back onto the satellite cabinet if required. There is space inside the rear
compartment for other accessories, such as microphones, leads and the remote handset.


Product specificaties

Merk: QTX
Categorie: Speaker
Model: PAV8

Heb je hulp nodig?

Als je hulp nodig hebt met QTX PAV8 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker QTX

Handleiding Speaker

Nieuwste handleidingen voor Speaker