QSC AcousticDesign AD-S112sw Handleiding

QSC Subwoofer AcousticDesign AD-S112sw

Lees hieronder de 📖 handleiding in het Nederlandse voor QSC AcousticDesign AD-S112sw (70 pagina's) in de categorie Subwoofer. Deze handleiding was nuttig voor 48 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/70

AcousticDesign™ Series

User Guide

AD-S6T – 6" two-way , foreground/background loudspeaker with 70/100V transformer

AD-S8T – 8" two-way, foreground/background loudspeaker with 70/100V transformer

AD-S10T – 10" two-way, foreground/background loudspeaker with 70/100V transformer

AD-S12 – 12" two-way, foreground/background loudspeaker

AD-S112sw – 12" direct-radiating subwoofer

TD-000329-00-C

*TD-000329-00*

TD-000329-00-C

EXPLANATION OF SYMBOLS

The term “WARNING!” indicates instructions regarding personal safety. If the instructions are not followed the result may be bodily injury or death.

The term “ ” indicates instructions regarding possible damage to physical equipment. If these instructions are not followed, it may result in CAUTION!

damage to the equipment that may not be covered under the warranty.

The term “IMPORTANT!” indicates instructions or information that are vital to the successful completion of the procedure.

The term " " is used to indicate additional useful information.NOTE

NOTE:

The intent of the lightning ﬂ ash with arrowhead symbol in a triangle is to alert the user to the presence of un-insulated

"dangerous" voltage within the product's enclosure that may be of sufﬁ cient magnitude to constitute a risk of electric shock to humans.

NOTE:

The intent of the exclamation point within an equilateral triangle is to alert the user to the presence of important safety, and

operating and maintenance instructions in this manual.

IMPORTANT SAFETY INSTRUCTIONS

WARNING!:

TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.

WARNING!:

While it is possible for one person to lift a loudspeaker, it is important to use proper lifting techniques. Suggested

reading: OSHA Technical Manual on Back Disorders and Injuries

(http://www.osha.gov/dts/osta/otm/otm_vii/otm_vii_1.html#app_vii:1_2).

• Keep these instructions.

• Heed all warnings.

• Follow all instructions.

• Clean only with a dry cloth.

• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliﬁ ers) that produce heat.

• Only use attachments/accessories speciﬁ ed by the manufacturer.

• Refer all servicing to qualiﬁ ed service personnel.

• Adhere to all applicable, local codes.

• Consult a licensed, professional engineer when any doubt or questions arise regarding a physical equipment installation.

Introduction

AcousticDesign series is a line of premium surface-mount loudspeakers intended for permanent installation applications. Housed in rugged ABS

molded enclosures, each loudspeaker (except the AD-S12 and AD-S112sw) features a 70/100V transformer for use with distributed-audio lines. The

unique X-Mount™ Bracket and Euro-style connector, supplied with each AcousticDesign loudspeaker, are designed for maximum ﬂ exibility and a quick

install. Featuring a knurled ball-mount and discrete angle deployment marks, installers can set loudspeaker deployment angles quickly and securely.

The Euro-style connector allows pre-wiring of the system and when combined with the quick “snap-on” deployment of the loudspeaker to the mount,

installation is completed in a fraction of the time required versus competitive models.

Unpacking

Package Contents

1. Quick-Start Guide

2. AcousticDesign Loudspeaker

3. Euro-style Connector, 4-pin

4. Terminal Weather Protection Cover

5. Phillips Screws (4) M4 (Terminal Weather Protection Cover)

6. X-Mount™ Bracket (Yoke Mount for AD-S112sw)

TD-000329-00-C

Set the Transformer Tap Switch

Refer to — Figure 1

1. Insert a 4mm ﬂ at-tip screwdriver into Transformer Tap hole

and engage the slot.

2. At fully clockwise the transformer is in 8 -bypass.

AD-S10T

AD-S6T, AD-S8T

Mount the Loudspeakers

Install the BracketX-Mount™

Refer to — Figure 4

WARNING!:

Install the system in accordance

with local building codes and regulations. Use

a licensed contractor or professional engineer.

QSC Audio Products is not responsible for

damages resulting from the negligent

installation of any bracket or loudspeaker.

1. Mount to a surface capable of supporting the weight of

the loudspeaker.

— Figure 1 —

4mm

100 Volt 70 Volt

8 8 Ω Ω

N/A 100W

100W 50W

50W 25W

25W 12.5W

— Table 1 —

— Figure 2 —

100 Volt 70 Volt

8 8 Ω Ω

N/A 60W

60W 30W

30W 15W

15W 7.5W

— Table 2 —

— Figure 3 —

— Figure 4 —

Product specificaties

Merk:	QSC
Categorie:	Subwoofer
Model:	AcousticDesign AD-S112sw
Kleur van het product:	Zwart
Gewicht verpakking:	19600 g
Breedte verpakking:	470 mm
Diepte verpakking:	552 mm
Hoogte verpakking:	698 mm
Type verpakking:	Doos
Impedantie:	8 Ohm
Gemiddeld vermogen subwoofer:	300 W
Subwoofertype:	Actieve subwoofer
Frequentiebereik subwoofer:	30 - 135 Hz
Breedte van de subwoofer:	354 mm
Hoogte van de subwoofer:	594 mm
Diepte van de subwoofer:	323 mm
Gewicht subwoofer:	13200 g
Subwoofer sensitiviteit:	90 dB