QSC AC-C6T Handleiding

QSC Speaker AC-C6T

Lees hieronder de 📖 handleiding in het Nederlandse voor QSC AC-C6T (4 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 71 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

AcousticCoverage (AC)

User Manual

Model: AC-C6T

TD-000473-00-A

*TD-000473-00*

TD-000473-00-A

EXPLANATION OF SYMBOLS

The term “WARNING!” indicates instructions regarding personal safety. If the instructions are not followed the result may be bodily injury or death.

The term “ ” indicates instructions regarding possible damage to physical equipment. If these instructions are not followed, it may result in damage to the equipment that may not be covered under the CAUTION!

warranty.

The term “IMPORTANT!” indicates instructions or information that are vital to the successful completion of the procedure.

The term " " is used to indicate additional useful information.NOTE

The intent of the lightning ﬂ ash with arrowhead symbol in a triangle is to alert the user to the presence of un-insulated "dangerous" voltage within the product's enclosure that may be of sufﬁ cient

magnitude to constitute a risk of electric shock to humans.

The intent of the exclamation point within a triangle is to alert the user to the presence of important safety, and operating and maintenance instructions in this manual.

IMPORTANT SAFETY INSTRUCTIONS

• Read these instructions

• Keep these instructions.

• Heed all warnings.

• Follow all instructions.

• Do not use this apparatus near water.

• Clean only with a dry cloth.

• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliﬁ ers) that produce heat.

• Only use attachments/accessories speciﬁ ed by the manufacturer.

• Refer all servicing to qualiﬁ ed service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have

fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

• Do not use this apparatus in or near water or liquids.

• Do not submerge the apparatus in water or liquids.

• Do not use any aerosol spray, cleaner, disinfectant or fumigant on, near or into the apparatus.

• Do not block any ventilation opening. Install in accordance with the manufacturer's instructions.

• Keep ventilation opening free of dust or other matter.

• Adhere to all applicable, local codes.

• Consult a licensed, professional engineer when any doubt or questions arise regarding a physical equipment installation.

Maintenance and Repair

Advance technology, e.g., the use of modern materials and powerful electronics, requires specially adapted maintenance and repair methods. To avoid a danger of subsequent damage to the apparatus, injuries to

persons and/or the creation of additional safety hazards, all maintenance or repair work on the apparatus should be performed only by a QSC authorized service station or an authorized QSC International Distributor.

QSC is not responsible for any injury, harm or related damages arising from any failure of the customer, owner or user of the apparatus to facilitate those repairs.

Warranty

For a copy of the QSC Limited Warranty, visit the QSC Audio Products website at www.qsc.com

Para una copia de la Garantía Limitada de QSC, visite el sitio web de QSC Audio Products, en www.qsc.com

Pour obtenir une copie de la garantie limitée de QSC, visitez le site de QSC Audio Products à www.qsc.com

Besuchen Sie die Webseite von QSC Audio Products (www.qsc.com) um eine Kopie der beschräenkte Garantie von QSC zu erhalten.

如果您想要有限保修的複印本，请造访音频产品的网站QSC QSC www.qsc.com

TD-000473-00-A

Prepare Ceiling

Refer to Figure 1.

1. Use the template provided to mark and cut a hole (1) in the ceiling where the

loudspeaker is to be installed. For frame-construction ceiling, skip to "Wire the

Loudspeakers".

2. Install two V-rails (2), one on each side of the hole, and supported by the

suspended-ceiling support rails (3).

3. Install the C-ring (4) over the hole, using the V-rails as support. Make sure the

clips on the C-ring are properly ﬁ tted over the V-rail.

4. Use sheet-metal screws (5) to secure the C-ring to the V-rails.

Wire the Loudspeakers

Refer to Figure 2.

1. Pass the wires down through the conduit/stress-relief clamp. Leave enough wire for

making connections. Carefully tighten the clamp over the wires, or over the conduit if

it is used.

2. Wire the female Euro-style plug (1) as shown in .Figure 3

3. Plug the connector securely into the receptacle.

4. Slide the cover (4) over the connector and secure with the Phillips screw.

Seismic Safety

Refer to .Figure 4

1. Attach an appropriate safety line to the safety tab on the back of the connector cover,

and to an appropriate part of the structure.

WARNING!:

Be sure to check and adhere to local building codes for

seismic requirements. If in doubt, consult an appropriate engineer.

Mount the Loudspeaker

Refer to .Figure 5

1. Make sure all of the dog-ears are up against the side of the metal loudspeaker housing.

2. Slide the Loudspeaker Housing up through the hole into the ceiling.

3. Use a Phillips screwdriver to tighten each of the four dog-ear screws. As you tighten the

screws, the dog-ears swing away from the housing and over the ceiling. Be sure all dog-

ears are properly positioned over the ceiling.

CAUTION!:

Do not overtighten the dog-ear screws!

4. Use a ﬂ at-tip screwdriver to set the transformer tap based on the requirements of the

installation.

5. Install the loudspeaker grill.

Speciﬁ cations

AC-C6T Speciﬁ cation

Transducer 152 mm [6 in.] Polypropylene cone with rubber surround

22 mm [0.86 in.] Silk dome tweeter, coaxially mounted

Rated noise power [rms] (1) 30 W

Nominal Impedance 8Ω

Transformer Taps 70V: 30, 15, 7.5, 3.75, 1.875 W

100V: 30, 15, 7.5, 3.75 W

8 BypassΩ

Effective frequency range (2) 65 Hz – 20 kHz

Rated coverage (3) 110° conical

Sensitivity (4) 89 dB

Maximum continuous SPL (5) 104 dB

Maximum peak SPL (5) 110 dB

Net weight 3.42 kg [8 lb]

Product dimensions (Diameter x Height) Ø 260 x 213 mm [Ø 10.24 x 8.4 in.]

Shipping weight 8.85 kg [20 lb] (pair packed)

Shipping dimensions (H x W x D) 305 x 619 x 305 mm [12 x 24.4 x 12 in.]

1 AES2-1984 noise signal for 2 Hrs, 8Ω

2 Half-space, -10 dB from on-axis sensitivity

3 -6 dB from on-axis, 500 Hz–5 kHz

4 Half-space, on-axis, 2.83V, 1 m

5 Calculated from rated noise voltage and sensitivity

— Figure 1 —

— Figure 2 —

— Figure 3 —

Parallel Wiring Diagram

Amp

To more

speakers

From

Source

To Additional

Loudspeakers

— Figure 4 —

— Figure 5 —

Dog-ears against loudspeaker

Turn the screw clockwise to engage

the dog-ear with the ceiling.

— Figure 6 —

[8.54"]

Ø 217 mm

[10.24"]

Ø 260 mm

[8.78"]

Ø 223 mm

[7.44"]

Ø 189 mm

[8.22"]

209 mm

[8.4"]

213 mm

[8.03"]

204 mm

Product specificaties

Merk:	QSC
Categorie:	Speaker
Model:	AC-C6T
Kleur van het product:	Wit
Gewicht:	3500 g
Breedte:	260 mm
Diepte:	213 mm
Hoogte:	- mm
Gewicht verpakking:	9500 g
Breedte verpakking:	318 mm
Diepte verpakking:	324 mm
Hoogte verpakking:	622 mm
Type verpakking:	Doos
Connectiviteitstechnologie:	Bedraad
Gemiddeld vermogen:	30 W
Aantal per verpakking:	1 stuk(s)
Aanbevolen gebruik:	Thuis
Impedantie:	8 Ohm
Audio-uitgangskanalen:	- kanalen
Speaker plaatsing:	Plafond-montage
Aantal drivers:	1
Frequentiebereik:	65 - 20000 Hz
Gevoeligheid:	89 dB
Signaal/ruis-verhouding:	110 dB
Luidspreker soort:	1-weg