QSC AC-C2T Handleiding

QSC Speaker AC-C2T

Lees hieronder de 📖 handleiding in het Nederlandse voor QSC AC-C2T (4 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 10 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/4
AcousticCoverage (AC)
User Manual
Model AC-C2T
TD-001530-01
*TD-001530-01*
2
TD-001530-01
EXPLANATION OF SYMBOLS
The term
WARNING!
indicates instructions regarding personal safety. Failure to follow these instructions could result in bodily injury or death.
The term
CAUTION!
indicates instructions that prevent damage to physical equipment. Failure to follow these instructions could cause damage to the
equipment that may not be covered under the warranty.
The term
IMPORTANT!
indicates instructions or information that are vital to the successful completion of the procedure.
The term
NOTE
is used to indicate additional useful information.
The lightning flash with arrowhead symbol in a triangle indicates that there is uninsulated dangerous voltage within the product's enclosure
that may cause electric shock to a person.
The exclamation point within a triangle indicates important safety, operating, and maintenance information.
IMPORTANT SAFETY INSTRUCTIONS
• Read these instructions and keep a copy for future reference. Strictly follow and heed all instructions and warnings. Install the loudspeaker only as
instructed.
• Do not use or submerge this loudspeaker in or near water or liquids.
• Clean only with a dry cloth. Do not use any aerosol spray, cleaner, disinfectant or fumigant on, near, or into the loudspeaker.
• Do not install the loudspeaker near any heat sources, such as radiators, heat registers, stoves, or other apparatus (including amplifiers).
• Do not use any attachments, accessories, mounts, or brackets that are not specified or approved by QSC, LLC.
• Refer all service to qualified personnel. Service is required if the mounting mechanism or loudspeaker have been damaged in any way, such as liquid
spilled into the loudspeaker; objects falling into it; exposure to rain or moisture; abnormal operation; or being dropped.
• Observe all applicable local codes. Consult a licensed professional engineer when devising an equipment installation to ensure compliance.
Maintenance and Repair
Advanced technology—e.g., the use of modern materials and powerful electronics—requires specially adapted maintenance and repair methods. To
avoid subsequent damage to the equipment, personal injury, and/or creation of additional safety hazards, have all maintenance or repair work on the
equipment performed only by a QSC authorized service station or an authorized QSC international distributor. QSC is not responsible for any injury,
harm, or related damages that arise from any failure of the customer, owner, or user of the equipment to facilitate those repairs.
Prepare Ceiling
Refer to Figure 1.
1. Use the template provided to mark and cut a hole (1) in the
ceiling where the loudspeaker is to be installed. For a frame-
construction ceiling, skip to .Wire the Loudspeakers
2. Install two V-rails (2), one on each side of the hole, and
supported by the suspended-ceiling support rails (3).
3. Install the C-ring (3) over the hole, using the V-rails as support.
Make sure the clips on the C-ring are properly fitted over the
V-rail.
4. Use sheet-metal screws (5) to secure the C-ring to the V-rails.
Wire the Loudspeakers
Refer to Figure 2.
1. Pass the wires down through the conduit/stress-relief clamp. Leave enough slack wire for making connections. Carefully tighten the clamp over the
wires or conduit.
2. Wire the Euro-style plug (1) as shown in .Figure 3
3. Slide the cover (4) over the connector and secure with the Phillips screw.
1
2
3
4
5
— Figure 1 —–
1
3
4
2
— Figure 2 —–
3
TD-001530-01
Seismic Safety
Refer to .Figure 4
1. Attach an appropriate safety line from the safety tab on the back
of the connector cover to an appropriate part of the structure.
WARNING!:
Be sure to observe local building
codes for seismic requirements.
Mount the Loudspeaker
Refer to .Figure 5
1. Make sure all of the dog-ears are up against the side of the metal
loudspeaker housing.
2. Slide the loudspeaker housing up through the hole into the
ceiling.
3. Use a Phillips screwdriver to tighten each of the four dog-ear
screws.
CAUTION!:
Do not overtighten the dog-ear screws!
4. Use a flat-tip screwdriver to set the transformer tap according to the design requirements.
5. Install the loudspeaker grille.
Parallel Wiring Diagram
To additional
loudspeakers
From
source
To additional
loudspeakers
1
Amp
— Figure 3 —–
— Figure 4 —– Dog-ears against loudspeaker
1
Turn the screw clockwise to engage
the dog-ear with the ceiling.
2
— Figure 5 —–
Specifications
Refer to .Figure 6
Name Specification
Transducer 2.75” treated paper cone
Rated noise power [continuous] (1) 16 W
Nominal impedance 8 Ω
Transformer taps 1, 2, 4, 8, 16 W, and 8 bypass; 70 and 100 VΩ
Effective frequency range (2) 70 Hz – 16 kHz
Rated coverage (3) 170° conical
Sensitivity (4) 83 dB
Maximum continuous SPL (5) 95 dB
Maximum peak SPL (5) 101 dB
Net weight 1.86 kg [4.9 lb]
Shipping weight 5.8 kg [12.8 lb]
Product dimensions (diameter × height) Ø 214 mm × 201 mm [Ø 8.4” × 7.9”]
Shipping dimensions (H × W × D) 273.1 mm × 609.6 mm × 266.7 mm [10.75”
× 24” × 10.5”]
1 AES2-1984 noise signal for 2 hours; 8 ohm setting
2 Half-space, -10 dB from on-axis sensitivity
3 -6 dB from on-axis, 500 Hz – 5 kHz
4 Half-space, on-axis, 2.83 V rms, at 1 m
5 Calculated from rated noise voltage and sensitivity
Ø6.93"
[176.00 mm]
8.43"
[214.00 mm]
Ø7.15"
[181.50 mm]
Ø5.59"
[142.00 mm]
7.9"
[201.05 mm]
7.5"
[191.10 mm]
.2"
[4.95 mm]

Product specificaties

Merk: QSC
Categorie: Speaker
Model: AC-C2T

Heb je hulp nodig?

Als je hulp nodig hebt met QSC AC-C2T stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Speaker QSC

QSC

QSC CSM15 Handleiding

20 November 2024
QSC

QSC CSM10 Handleiding

20 November 2024
QSC

QSC HPR151W Handleiding

20 November 2024
QSC

QSC HPR181W Handleiding

20 November 2024
QSC

QSC MD-FP122-66 Handleiding

5 November 2024
QSC

QSC MD-FP122-96r Handleiding

5 November 2024
QSC

QSC MD-FP122-64r Handleiding

5 November 2024
QSC

QSC HF-75BX2 Handleiding

23 Oktober 2024
QSC

QSC SC-412 Handleiding

23 Oktober 2024
QSC

QSC SC-443 Handleiding

23 Oktober 2024

Handleiding Speaker

Nieuwste handleidingen voor Speaker

Samson

Samson Rubicon R8a Handleiding

22 November 2024
Sony

Sony SS-SPG01 Handleiding

22 November 2024
Sony

Sony SS-MB200H Handleiding

22 November 2024
Sony

Sony SS-MB300H Handleiding

22 November 2024
JBL

JBL Studio 690 Handleiding

22 November 2024
JBL

JBL Studio 680 Handleiding

22 November 2024
Kramer

Kramer Tavor 8-Sub Handleiding

21 November 2024
Kramer

Kramer Galil 6-AW Handleiding

21 November 2024
Extron

Extron SM 28 Handleiding

21 November 2024
JBL

JBL RM10 Handleiding

20 November 2024