Pyle PWPBT15 Handleiding

Pyle Cradle/docking station PWPBT15

Lees hieronder de 📖 handleiding in het Nederlandse voor Pyle PWPBT15 (1 pagina's) in de categorie Cradle/docking station. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/1

Location of controlsLocation of controls

1. Open the cover on the bottom end of the speaker.

2. Connect the small end of the Micro USB charging

cord into the DC5V charging port on the end of the

speaker.

3. Connect the other end of the Micro USB cable to

your computer’s USB port.

4. The LED light on the top panel of the speaker lights

up RED when charging.

5. The LED light turns o when nished

charging (approximately 4 hours).

6. Close the cover on the bottom of the speaker.

Charging the Bluetooth SpeakerCharging the Bluetooth Speaker

Pairing the speaker with a Bluetooth

enabled device

Pairing the speaker with a Bluetooth

enabled device

Bluetooth

Speaker

Micro USB

Charging

Cable

1. Make sure your Bluetooth device supports A2DP prole.

2. Turn up the volume on your Bluetooth device.

3. You may have to unpair the speaker, then re-pair to your

device.

1. Make sure the Bluetooth Speaker is turned ON before

beginning the pairing process.

2. Keep your Bluetooth Speaker and Bluetooth enabled

device within 3 feet of each other during the pairing

process.

3. Press and hold the [ MODE ] button. The LED light on

the speaker will ash BLUE.

4. Check that YOUR device’s Bluetooth feature is turned ON.

5. Try repeating the pairing process, see “Pairing the Speaker

with a Bluetooth enabled device”.

My Bluetooth Device is not able to pair with the

Bluetooth Speaker.

I can pair the Bluetooth Speaker with my Bluetooth

device, but I cannot hear any music?

Troubleshooting tipsTroubleshooting tips

1. Make sure the Bluetooth Speaker is turned ON before

beginning the pairing process.

2. Press and hold the [ MODE ] button. The LED light on

the speaker will ash BLUE.

3. The speaker is now in pairing mode

I cannot get the Bluetooth Speaker into Pairing Mode.

Legal informationLegal information

Limited Warranty

within 3 feet

The screenshots above are typical of many Bluetooth

enabled devices in the market today, and are used

to assist in the explanation of the pairing process.

Your Bluetooth enabled device’s interface and

interaction with the Bluetooth Speaker may

slightly dier from the illustrations above.

1. Make sure the Bluetooth Speaker is turned o.

2. Keep your Bluetooth Speaker and Bluetooth

enabled device within 3 feet of each other during

the pairing process.

3. Slide the switch to the ON position. Power ON/OFF

The LED light will ash quickly.

4. Press and hold the [ Mode] button. An audible

signal will be emitted and the LED will blink

steadily. The speaker is now in pairing mode.

5. Set your mobile phone or other Bluetooth enabled

device to search for Bluetooth devices.

Using your Bluetooth SpeakerUsing your Bluetooth Speaker Playing musicPlaying music

Most media enabled smart phones will display

“Connected to phone audio and media” when

connecting to the Bluetooth Speaker. This means

you can make phone calls and enjoy your music.

To enjoy wireless music on your Bluetooth Speaker,

make sure you are connected to a Bluetooth enabled

device. Once connected you can press PLAY on your

Bluetooth device or you can press the [ MODE ]

button on the PBT604 Bluetooth Speaker.

Once playback has begun, you can control the music

or answer phone calls from the control buttons of the

Bluetooth speaker (with devices that have the AVRCP

Bluetooth prole).

Skipping or searching songs

(With devices that have AVRCP Bluetooth prole)

tPress the [ VOL+] button to go to the next song.

tPress the [ VOL- ] button to go to the previous

song.

Music Controls

1. LED Light

2. [ VOL- ] button: tVolume Down (hold)

tPrevious Track (quickpress)

3. : [ MODE ] button tPlay/Pause (quickpress)

tAnswer Call/End Call (quickpress)

4. : [ VOL+ ] button tVolume Up (hold)

t Next Track (quickpress)

5. Microphone

6. Power On/O switch

7. Micro USB DC5V charging port

8. 3.5mm auxilliary input

9. Hook

10. Volume knob

USB Charging

Cable

Micro USB

Charging Port

Speaker

PC Should you have any questions or problems concerning this

product, please contact our customer service department at:

Customer Support:

718-535-1800 ext: 279

support@pyleaudio.com

TO OBTAIN WARRANTY SERVICE:

 Provide proof of the date of purchase within the package

(Dated bill of sale).

 Prepay all shipping costs to the authorized service center,

and remember to insure your return.

 Include a return shipping address (no P.O. Boxes), a

telephone contact number, and the defective unit within

the package.

 Describe the defect or reason you are returning the

product.

Your product will be repaired or replaced, at our option, for

the same or similar model of equal value if examination by

the service center determines this product is defective.

Products received damaged as a result of shipping will

require you to le a claim with the carrier.

The shipping address of the authorized service center is:

 Pyle Service Center

1600 63rd Steet

Brooklyn, NY 11204

You will also need to include a $20 money

order to cover the return shipping. It will take

roughly 2-3 weeks for the product to be

returned back to you. Please let us know

if this is being shipped from outside the US

before you ship it.

90 Days Limited Warranty

In the unlikely event that this product is defective, or does

not perform properly, you may within ninety (90) days from

your original date of purchase return it to the authorized

service center for repair or exchange.

FCC Part 15:

This equipment has been tested and found to comply with the

requirements for a Class B digital device under Part 15 of the Federal

Communications Commission (FCC) rules. These requirements are

intended to provide reasonable protection against harmful

interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the

equipment o and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

t3FPSJFOUPSSFMPDBUFUIFSFDFJWJOHBOUFOOB

t*ODSFBTFUIFTFQBSBUJPOCFUXFFOUIFFRVJQNFOUBOESFDFJWFS

t$POOFDUUIFFRVJQNFOUJOUPBOPVUMFUPOBDJSDVJUEJòFSFOUGSPN

that to which the receiver is connected.

t$POTVMUUIFEFBMFSPSBOFYQFSJFODFESBEJP57UFDIOJDJBOGPSIFMQ

Do not attempt to repair or modify this equipment.

8BSOJOH$IBOHFTPSNPEJöDBUJPOTUPUIJTFRVJQNFOUOPUFYQSFTTMZ

approved by the party responsible for compliance could void the

user’s authority to operate the equipment.

i5IJTEFWJDFDPNQMJFTXJUI1BSUPGUIF'$$3VMFT0QFSBUJPOJT

subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including

interference that may cause undesired operation.”

PWPBT15

User Guide

3.5mm

Auxilliary

Cord

MIC

ON/OFF DC 5V AUX

On an iPhone

tGo to SETTINGS > GENERAL > BLUETOOTH

(Make sure Bluetooth is turned ON)

Paired

Bluetoot h

General

Bluetooth

SBT604

Devices

Now dis coverable

12:12 PM

On a Blackberry

t(PUP4&55*/(4015*0/4#-6&5005)

t&OBCMF#-6&5005)

Bluetooth:

Discoverable:

Paired Devices

SBT604

Bluetoo th 3G

Yes

Add New Device

On an Android Phone

tGo to SETTINGS > BLUETOOTH > MENU >

Bluetooth settings

Bluetooth devic es Sca nning

Bluetooth

Device name

SBT604

Visible

Search for devices

Make devi ce visibl e

12:12 PM

On other Cell Phones/Devices

tReview the instruction manual that came

with your phone/device.

Searching for devices

Paired Devices:

1 found

Stop

*Empty *

Bluetooth: Enabled

6. When the Bluetooth enabled device nds the

speaker, select PWPBT15 from the list of found

devices.

7. If required, enter the password 0000. Select OK

or Yes to pair the two units.

8. After a successful registration, the LED Indicator

light will become solid BLUE.

Note: If the speaker has already been connected

to the Bluetooth device/phone, the speaker will

reconnect with the Bluetooth device/phone

automatically when turned on.

Make sure you charge the speaker for 8 hours

before using it for the rst time.

ON/OFF DC 5V AUX

Powering ON/OFF

t To turn ON Power ON/OFF, slide the switch to the

ON position.

t To turn OFF Power ON/OFF, slide the switch to the

OFF position.

Adjusting the volume

Way 1: Rotate the Volume Knob to adjust the volume

to the desired level.

Way 2: Press and hold the button to [ VOL+]

increase the volume and the [ VOL-]

button to decrease it to your desired level.

You may also adjust the volume from your

mobile phone’s volume control.

Answering/Ending a call

t To answer a call, quickpress the button.[ MODE ]

t To end a call, quick press the button.[ MODE]

To make a call

Dial the number and press the send button on your

mobile phone. The call is automatically transferred to

the speaker.

Play/Pause

Press the button to pause the music. [ MODE ]

To resume music playback, press the [ MODE ]

button again.

You may also adjust the volume from your

mobile phone’s volume control.

Adjusting the volume

Way 1: Rotate the Volume Knob to adjust the volume

to the desired level.

Way 2: Press and hold the button to [ VOL+]

increase the volume and the [ VOL-]

button to decrease it to your desired level.

21 3

MIC

1. [ VOL- ] button: tVolume Down (hold)

tPrevious Track (quickpress)

2. [ MODE ] button: tPlay/Pause (quickpress)

tAnswer Call/End Call (quickpress)

3. : [ VOL+ ] button tVolume Up (hold)

t Next Track (quickpress)

Product maintenanceProduct maintenance

tPower o this product when not in use.

tDO NOT expose this product to water or other

liquids.

tDO NOT use abrasive cleaning solvents to clean the

Bluetooth Speaker

tIf you will not use the Bluetooth Speaker for long

periods, be sure to store it in a dry place, free from

extreme temperature, humidity and dust.

Using as a wired speakerUsing as a wired speaker

The PWPBT15 can be used as a wired speaker by using

the included 3.5mm Auxiliary Cord.

1. Plug one end of the Auxiliary Cord into the AUX jack

on the side of the speaker.

2. Plug the other end of the Auxiliary Cord into the

headphone jack of any media device that has a 3.5mm

headphone jack (this is a standard headphone-out

jack).

3. Use your media device's music controls to control

the music. Only volume can be controlled when

connected to a device using the Auxiliary Cord.

Certain Bluetooth features including those listed may

not be supported by all compatible Bluetooth-enabled

devices, and/or the functionality of such features may

be limited in certain devices.

In order for Bluetooth devices to communicate with

one another properly, they must utilize the same

Bluetooth prole. To determine the proles

supported by your device (mobile phone, computer

or MP3 player), please refer to the device’s user

guide.

Product specificaties

Merk:	Pyle
Categorie:	Cradle/docking station
Model:	PWPBT15
Kleur van het product:	Wit
Gewicht:	485 g
Breedte:	58.4 mm
Diepte:	185.4 mm
Hoogte:	68.6 mm
Gebruikershandleiding:	Ja
Capaciteit van de accu/batterij:	400 mAh
Bluetooth:	Ja
Aan/uitschakelaar:	Ja
Bluetooth-versie:	3.0+HS
Bluetooth-profielen:	A2DP, AVRCP, HFP, HSP
Connectiviteitstechnologie:	Draadloos
Type stroombron:	Battery, USB
Meegeleverde kabels:	USB
Accu/Batterij voltage:	3.7 V
Gemiddeld vermogen:	- W
Levensduur accu/batterij:	6 uur
Aanbevolen gebruik:	Universeel
Impedantie:	4 Ohm
Veiligheidsfunties:	Shock resistant, Water resistant
USB oplaadpoort:	Ja
Audio-uitgangskanalen:	- kanalen
Frequentiebereik:	60 - 20000 Hz
AUX ingang:	Ja
Bereik van Bluetooth:	10 m
Inclusief microfoon:	Ja
Batterijtechnologie:	Lithium
Type batterij:	Ingebouwd