Pyle PUSBMIC50 Handleiding

Pyle Microfoon PUSBMIC50

Lees hieronder de 📖 handleiding in het Nederlandse voor Pyle PUSBMIC50 (1 pagina's) in de categorie Microfoon. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
PUSBMIC50
UHF WIRELESS USB MICROPHONE
USERS MANUAL
PLEASE READ CAREFULLY BEFORE OPERATION
Computer
Plug USB connector of wireless USB
receiver into USB port on a computer. Turn
on handheld microphone and use audio
software in your computer to record.
USB
INTRODUCTION
With a wireless receiver built into a USB
stick and a high-quality handheld dynamic
microphone transmitter, this UHF wireless
USB microphone brings the convenience of
wireless to your karaoke and recordings. It's
the ideal wireless system for karaoke,
podcasting, YouTube performances, voice
over projects and much more.
The handheld microphone transmitter
features a high-quality dynamic mic capsule
designed to provide exceptional sound
reproduction for spoken word
presentations, as well as singing
applications and more. It offers over 60' of
wireless range (environment dependent),
operating in UHF 600~960 high frequency
band. The wireless receiver is USB powered
and features plug-and-play operation with
no driver installation required. Simply
connect the receiver directly to your
computer via USB and start singing and
recording.
FEATURES
system
Wireless receiver built into a USB stick
Handheld dynamic microphone
transmitter
Transmitter operates on two AA batteries
(included)
60' operating range (environment
dependent)
Plug-and-play operation with no driver
installation required
Ideal for computer karaoke, podcasting,
voice over projects and much more.
Record wirelessly to your favorite DAW or
voice recognition software on your
Mac/PC
UHF 600~960MHz high band wireless
USING HANDHELD MICROPHONE
1 2
3
1. USB connector: Plug into a computer or
Mp3 player USB port or 5V power adapter
to get power.
2. Line out: to connect to external speaker.
3. RF indicator: When handheld microphone
is powered on this LED will light red
displaying normal reception.
Parts Description
21 3 4
1. Grille(Capsule inside)
2. Power/low battery Indicator
3. Power ON/OFF/MUTE Switch
4. Battery Compartment/Cover
1. Open battery cover. Install the provided
2pcs 1.5V AA batteries and then close the
cover. Pay attention to the correct
polarity.
2. Push power switch to ON position, power
indicator should flash once briefly
indicating that the transmitter has
sufficient power. If the power LED
indicator stays on, it indicates that the
battery has insufficient power and should
be changed. If the power LED indicator
does not light at all and the transmitter
does not work, it indicates the battery is
dead and you should change the battery.
3. Now receiver RF indicator should
light(Please confirm frequency of
microphone same as that of receiver
before operation).
4. Push power switch to MUTE position to
mute the sound.
5. If the microphone is not going to be used
for any length of time, push power switch
to OFF position and remove the battery.
CONNECTION 1(Computer Karaoke)
Computer
Speaker
Plug USB connector of wireless USB
receiver into USB port on a computer.
Connect external speaker to phone out of
USB receiver. Play music from computer and
turn on handheld microphone to start sing a
karaoke song!
1. With this connection please set playing
device(audio output device) of your
computer to “USB Audio Device.
2. receiver will receive
vocal signal from handheld MIC and pass
vocal signal directly to LINE OUT to be
mixed with music signal from computer
via USB connector. Recording is not
allowed in this mode.
With this connection
Note:
1. In Recording Mode please
device(audio input device) of your computer
to USB Audio Device.
2.In Recording Mode please do not connect
headphone or external speaker to phone
out of USB receiver. If you want to play
recorded file connect headphone or
external speaker to your computer phone
out.
set recording
Note:
SPECIFICATIONS
Frequency Range: 600~960MHz
Frequency Response: 100Hz~12KHz
Dynamic Range: >80dB
Operating Range: 60'(
)
Receiver Power Supply: 5V;
Transmitter Power Supply: 3V(2x1.5V AA
batteries)
Transmitting Power: <10mW
Receiver Output: >300mV
Output Impeadance: 1KΩ
environment
dependent
Operation
Speaker or Headphone
PHONE
MIC IN/LINE IN
EQ
CONNECTION 2(Computer Recording)
ACTIVE SPEAKER
USB PORT OF MP3 PLAYER
CONNECTION 3(Working as a Wireless
Microphone system)
Plug USB connector of wireless USB
receiver into USB port of Mp3 player in your
active speaker system. Using supplied
3.5/3.5 audio cable connect line out of
wireless USB receiver to MIC IN or LINE IN
of your active speaker.
This wireless USB receiver can also be
powered by external 5V power adapter(not
supplied) to be used as a wireless
microphone system.
USING WIRELESS RECEIVER


Product specificaties

Merk: Pyle
Categorie: Microfoon
Model: PUSBMIC50
Kleur van het product: Zwart
Breedte: 53 mm
Diepte: 238.7 mm
Stroombron: Batterij/Accu
Connectiviteitstechnologie: Draadloos
Meegeleverde kabels: Audio (3,5 mm)
Ondersteund aantal accu's/batterijen: 2
Impedantie: 1000 Ohm
Maximale afstand: 18 m
Gevoeligheid microfoon: 95 dB
Meegeleverde ontvanger: Ja
Frequentie microfoon: 40 - 15 Hz
Diepte (imperiaal): 9.4 "
Aantal producten inbegrepen: 1 stuk(s)
Type batterij: AA

Heb je hulp nodig?

Als je hulp nodig hebt met Pyle PUSBMIC50 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Microfoon Pyle

Handleiding Microfoon

Nieuwste handleidingen voor Microfoon