Pyle PSTND35.5 Handleiding

Pyle Microfoon PSTND35.5

Lees hieronder de 📖 handleiding in het Nederlandse voor Pyle PSTND35.5 (2 pagina's) in de categorie Microfoon. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
PSTND35
Heavy Duty Telescoping Height
Adjustment Monitor Speaker Stand
(Pair)
www.pyleaudio.com
ASSEMBLING:
1. Take one long hex bolt and one washer and
insert through hole in center of one triangular
base on side with rubber feet.
2. Thread the long hex bolt into the bottom of
one vertical shaft and tighten hex bolt with the
provided Allen wrench to secure vertical shaft to
triangular base.
3. Unthread and remove short hex bolt with
washer located in the top of the vertical shaft.
4. Insert short hex bolt with washer through hole
in the center of one monitor plate and thread into
top of the vertical shaft. Secure monitor plate to
vertical shaft with the Allen wrench.
5. Adjust monitor plate height by loosening large
thumb knob on clutch housing and move upper
shaft to desired height.
6. Insert safety pin all the way through vertical
shaft at lowest hole exposed, allowing the safety
pin to rest on clutch housing. Secure by tightening
large thumb knob on clutch housing.
7. When placing stand on carpet, remove the
rubber feet from triangular base and screw in
three leveling carpet spikes. Adjust carpet spikes
so that the monitor platform is level.
8. Repeat steps 1 thru 7 for second stand


Product specificaties

Merk: Pyle
Categorie: Microfoon
Model: PSTND35.5

Heb je hulp nodig?

Als je hulp nodig hebt met Pyle PSTND35.5 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Microfoon Pyle

Handleiding Microfoon

Nieuwste handleidingen voor Microfoon