Pyle PLVW92U Handleiding

Pyle Televisie PLVW92U

Lees hieronder de 📖 handleiding in het Nederlandse voor Pyle PLVW92U (2 pagina's) in de categorie Televisie. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
FRONT PANEL
1. MODE: Switch between the video
inputs. (HDMI,RCA1,RCA2,VGA)
2. Analog Decrease: Forward select
setting the items or analog
decrease menu.
3. MENU: Open the menu to
adjust the units display settings.
4. Analog Increase:
Backward select setting the items
or analog increase menu.
5. POWER: Turn the unit on and o.
6.1R: Remote control receiver.
REMOTE
Please read this manual thoroughly
before using this product and keep
for future reference.
REMOTE CONTROL BATTERY
1. Always use new batteries when relacing
the old set.
2. Do not attempt to charge, short-circuit,
disassemble, heat or burn used batteries.
3. Battery replacement is necessary when
remote control acts sporadically or stops
operating this device.
4. Do not place objects between the remote
receiver.
5. lf the monitor does not operate even when
operating the remote control from a close
range, it is time to replace the batteries.
WIRING
MENU OPERATION Use the unit to achieve the desired settings.
1. Press the button on the unit to bring up the on-screen picture control menu.MENU
2. Select the desired menu by pressing the Remote left/right button on the unit to choose BRIGHTNESS-CONTRAST-HUE-
SATURATION-LANGUAGE SOURCE-RESET-EXIT MENU. Press the Remote button to enter into the control menu.
3. Adjust the current settings with the left/right button on the unit, then press the button on unit to achieve the desired MENU
settings and return to the upper level of the menus.
Notice: In dierent mode menu is slightly dierent.
PLVW92U - PLVW125U - PLVW154U - PLVW194U
www.PyleUSA.com
Video Monitor Panel Display Screen, Full HD 1080p Support, HDMI/RCA/VGA Connectors
The Pyle 'PLVW’ LCD Monitor Display Screens are universal and can be used in a wide variety of applications. Mount the versatile video
display in your vehicle, at home or in the oce. They are perfect for custom installations and can be used for convenient safety
surveillance monitoring, vehicle media entertainment, as an optional second monitor expansion and more. The slim-styled panel design
allows for simple HD high-resolution video display ability wherever needed. Connect your system using the inputs: (2) RCA video, (1)
HDMI and (1) VGA connector; it also features RCA audio (LIR) connector jacks for connection to an external sound system.
Enjoy the convenience of widescreen HD video display with the Pyle ' Universal Monitor Systems.PLVW
Power supply do not meet the polarity, otherwise It will damage lnsurance tube.
(Fuse Specications : 3A or 5A)
VGA Supported Video Modes: Maximum matching resolution
HDMI Supported Video Modes:
1080P/1080I/720P/480P/576P
Important Note:
Video Inputs: RCA/VGA are used only for
video signal input transmission
-- do not support audio
3. Panel Mounting
The display area is aligned with the position of the panel in
the frame body, a little hard press to hang buckle at the
surface of the panel and the body t.
Note: The frame display area must be entirely within the
neat, buckle clasp rmly to hang.
WARNING: This product is a liquid crystal display, install and watch the position of the horizontal line around, watch so as not to aect the image quality.
FEATURES:
Full HD 1080p Support
Widescreen HD LCD Display
In-Wall / In-Console Mountable
For Vehicle & Home/Oce
Applications
Universal Mount Perfect for
Custom Installations
Removable Screen Display Frame
HDMI, VGA, (2) x RCA Video Input
Connectors
RCA (L/R) Audio Output
Connector Jacks
Video Input Selectable
• Front Panel Button Controls
INSTALLATION & MOUNTING
1. Drive Mounting Holes
Draw a cutting line on the wall according to the following size to install. The depth of the hole should be larger than 36MM.
2. Install the Main
Connect the lines, place the subjects in mounting hole, upper
and lower case-preserving Gap, then with 4 screws.
4mm X 12mm or 4mm X (12+*)mmScrew Specications:
4. Panel Removal
Use a screwdriver or other at
tool, slightly hard to pry the
bottom right corner (part 1),
bottom right hang buckle will
depart from the main body of
the Panel; Then use the same
method to open the panels
hang buckle 2,3,4, to remove
the Panel.
• Steel Monitor Housing Frame
Cut-Out Holes for Easy Mounting
• Brightness, Contrast, Hue, Saturation
Adjustable
• Stain Resistant & Paintable Monitor
Frame
Works Great as Surveillance Display
• Includes Wireless Remote Control,
Cut-Out Template, Mounting Screws
*Power Supply Cable Available,
Model Sold Separately: PS5A
TECHNICAL SPECS:
HDMI Support: 1080p, 1080i, 720p, 480p, 576p
PAL/NTSC Auto Color System
Screen Aspect Ratio Selectable - 16:9 / 4:3
Power Supply: DC 12V
Cut-Out Dimensions 10.3'' x 7.2'' x 1.5'' 14.0'' x 9.5'' x 1.5'' 15.7'' x 11.2'' x 1.5'' 13.4'' x 18.5'' x 1.5''
SIZE / DIMENSIONS (L X W X D)
-with Frame
TOTAL DIMENSIONS
12.2'' x 7.9'' x 1.1'' 16.0'' x 10.0'' x 1.1'' 17.6'' x 11.8'' x 1.1'' 20.4'' x 13.9'' x 1.3''
-without Frame 11.4'' x 6.7'' x 0.9'' 15.1'' x 8.9'' x 0.9'' 16.8'' x 10.6'' x 0.9'' 19.6'' x 12.8'' x 1.1''
Weight 4.25 lbs. 6.05 lbs. 7.86 lbs. 11.67 lbs.
MODEL PLVW92U PLVW125U PLVW154U PLVW194U
MODEL PLVW92U PLVW125U PLVW154U PLVW194U
Video Display
Screen Size 9.0'' -inch 12.5'' -inch 15.4'' -inch 19.0'' -inch
Native
Resolution
800 x 480
(RGB)
1366 x 768
(RGB)
1280 x 800
(RGB)
1440 x 900
(RGB)
Contrast Ratio 500:1 500:1 500:1 1000:1
Brightness 200 cd/m 250cd/m 250cd/m 250cd/m
Power
Consumption <5.5 Watt <6.5 Watt <11.5 Watt <18 Watt
Amperage Draw 3A 3A 3A 3A


Product specificaties

Merk: Pyle
Categorie: Televisie
Model: PLVW92U

Heb je hulp nodig?

Als je hulp nodig hebt met Pyle PLVW92U stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Televisie Pyle

Handleiding Televisie

Nieuwste handleidingen voor Televisie