Pyle PLUTV55BTR Handleiding

Pyle Speaker PLUTV55BTR

Lees hieronder de 📖 handleiding in het Nederlandse voor Pyle PLUTV55BTR (3 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 15 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3
5.25'' Waterproof Rated Off-Road
Wireless BT Speakers
1000 Watt Amplified Vehicle Speaker System
for ATV, UTV, 4x4, Jeep with RGB Lights
and Remote Control
PLUTV55BTR
Questions? Issues?
We are here to help!
Phone: (1) 718-535-1800
Email: support@pyleusa.com
www.PyleUSA.com
5
What’s in the Box:
(1) 5.25'' Amplied Main Speaker
(1) 5.25'' Passive Support Speaker
Speaker Connection Wires, 6.6' ft.
(2) Butt Connectors, 16-22 AWG
(2) 1.75” Aluminum Mounting Brackets
(2) 2” Aluminum Mounting Brackets
(2) 6.5” x 0.95” x 0.67”Inches Rubber Pads
(2) 5.7” x 0.95” x 0.67”Inches Rubber Pads
(2) 6x50mm Hexagon Socket Head Cap Screws
(2) Stainless Steel Nuts
RGB Connection Wire, 6.6’ ft.
Remote Control
Technical Specs:
Speaker Power: 1000 Watt MAX
Amp Power: 2 x 250 Watt MAX @ 4 Ohms (2 x 125 Watt RMS)
Amp Type: 2-Channel, Class D
Marine Grade Waterproof Rating: IP-X5
Speaker Type: Polypropylene Cone, Butyl Rubber Surround (x2)
Tweeter Type: Neodymium Dome (x2)
Frequency Response: 80Hz-20kHz
Impedance: 4 Ohm
Magnet Type: 24 oz. Circuit
Mid-Woofer Voice Coil Type: 1'', Aluminum
Sensitivity: 88 dB +/- 2 dB @ 1M/1W
Anti-Thump Turn-On
Soft Turn On/O
T.H.D: <0.05%
S/N Ratio: >80dB
Channel Separation: >65dB
Amp Freq. Response: 20Hz-20 kHz
Fuse: 1 x 15A
Power Supply: DC 12V
Universal Mounting Brackets Roll-Bar / Roll-Cage Diameter: 1.75’ ~ 2.0’ –inches
Speaker Dimensions: 6.5’ x 7.1’ x 9.5’ -inches, with Bracket (-Each)
www.PyleUSA.com
2
www.PyleUSA.com
3
www.PyleUSA.com
4
Step 8: Connected two speakers by RGB connect wire, see the drawing in below
(See Illustration 3)
Remote Control Functions
10 static colors for choice with 8 kind of brightness which can adjust up and
down.
3 colors ash, 4 colors strobe, 7 colors fade, 7 colors smooth, all modes can
adjust the brightness and speed.
In static color mode, the brightness can adjust up and down.
6 kinds of EQ mode.
Gray
Gray
Gray/Black Gray/Black
Gray Gray
Gray/Black Gray/Black
RGB Connect
Gray
Gray/Black
--
BlackRed
Gray
+
+
+
-
Power
AUX IN
Gray/Black
3Features:
Pro Audio PowerSport Speakers with RGB Lights
Amplied (Active) Speaker System
Wireless BT Music Streaming Ability
Bridged Sound System: (2) x 5.25'' Woofers + (2) x 1'' Tweeters
Marine Grade Waterproof Rated Construction
Weatherproof & Water-Resistant Housing
2-Way Full Range Stereo Sound Reproduction
Built-in Digital Sound Processing Amplier
Integrated Speaker Power & Wiring Harness
Compact Size & High-Powered Output
Impressive Bass Response
Aux (3.5mm) Input Jack
Connect & Stream Audio from External Devices
Sleek Design, Machine Molded Speaker Cabinet Housing
Rugged, Universal Mount Bracket Design for Roll-Bar/Roll-Cage
Used for O-Road Outdoor Vehicles: ATV, UTV, 4x4, Jeeps, Marine Watercraft
Wireless BT Connectivity:
Simple & Hassle-Free Pairing
Instant Wireless Audio Streaming Ability
Works with All of Todays Latest Devices
Smartphones, Tablets, Laptops, etc.
Wireless BT Version: V5.0
Wireless BT Network Name: ‘PyleUSA
Wireless Range: 30+ ft.
*Wireless BT Receiver Module Built-Into Amplier of Main/Active Speaker
POWER OFF/ON
FLASH
STROBE
FADE
SMOOTH
STATIC COLOR CHOICE
BRIGHTNESS &
SPEED UP/ DOWN
NORMAL
JAZZ
POP
COUNTRY
ROCK
CLASSIC
Rubber Pad
STEP 1 STEP 2
STEP 3
STEP 5
STEP 4
Step 1: Put the PLUTV55BTR speaker in a safe place.
Step 2: Slide in the buckle with rubber pad attached to the bracket stand
of the speaker. Attach the set to the handle bar of vehicle/ship.
Step 3/4: Attach screw to lock the buckle.
Step 5: Option for adjustable PYLE logo---Unbolted the screws rst,
adjusting logo direction, then re-x screws.
Step 6: Using accessories of Butt Connector to Connect Speaker wires
(See Illustration 1)
Step 7: Using accessories of Butt Connector to Connect Power Cable
(See Illustrations 2)
PLUTV55BTR Installation
1. To avoid potential shorts in the electrical system, be sure to disconnect the (-)
battery cable before installation. Use this unit with a 12-Volt battery and
negative grounding only. Failure to do so may result in a re or malfunction.
2. Speaker Mounting suggestion as below:


Product specificaties

Merk: Pyle
Categorie: Speaker
Model: PLUTV55BTR

Heb je hulp nodig?

Als je hulp nodig hebt met Pyle PLUTV55BTR stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Pyle

Handleiding Speaker

Nieuwste handleidingen voor Speaker