Pyle PLUTV53BTA Handleiding

Pyle Speaker PLUTV53BTA

Lees hieronder de πŸ“– handleiding in het Nederlandse voor Pyle PLUTV53BTA (2 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 29 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
This products can expose you to a chemical or group of chemicals, which
may include ”Di (2-ethylhexyl) phthalate (DEHP)” which is known in the
state of California to cause cancer, birth defects, or other reproductive harm.
For more info, go to https://www.p65warnings.ca.gov/.
Questions? Issues?
We are here to help!
Phone: (1) 718-535-1800
Email: support@pyleusa.com
PLUTV53BTA
5.25’’ Waterproof Rated Off-Road Wireless BT Speakers
Amplified Vehicle Speaker System for ATV, UTV, 4x4, Jeep (1000 Watt)
www.PyleUSA.com
2
Gray
Gray
Gray/Black
Gray/Black
+ +
-
-
Black
Red
AUX
IN
1
Gray
Gray/Black
+ +
- -
BlackRed
Gray
Gray/Black
+
-
Power
AUX IN
2
www.PyleUSA.com
3
Features:
β€’ Pro Audio PowerSport Speakers
β€’ Amplied (Active) Speaker System
β€’ Wireless BT Music Streaming Ability
β€’ Bridged Sound System: (2) x 5.25'' Woofers + (2) x 1’’ Tweeters
β€’ Marine Grade Waterproof Rated Construction
β€’ Weatherproof & Water-Resistant Housing
β€’ 2-Way Full Range Stereo Sound Reproduction
β€’ Built-in Digital Sound Processing Amplier
β€’ Integrated Speaker Power & Wiring Harness
β€’ Compact Size & High-Powered Output
β€’ Impressive Bass Response
β€’ Aux (3.5mm) Input Jack
β€’ Connect & Stream Audio from External Devices
β€’ Sleek Design, Machine Molded Speaker Cabinet Housing
β€’ Rugged, Universal Mount Bracket Design for Roll-Bar / Roll-Cage
β€’ Used for O-Road Outdoor Vehicles: ATV, UTV, 4x4, Jeeps, Marine Watercraft
Wireless BT Connectivity:
β€’ Simple & Hassle-Free Pairing
β€’ Instant Wireless Audio Streaming Ability
β€’ Works with All of Today’s Latest Devices
β€’ Smartphones, Tablets, Laptops, etc.
β€’ Wireless BT Version: V5.0
Technical Specs:
β€’ Speaker Power: 1000 Watt MAX
β€’ Amp Power: 2 x 250 Watt MAX @ 4 Ohms (2 x 125 Watt RMS)
β€’ Amp Type: 2-Channel, Class D
β€’ Marine Grade Waterproof Rating: IP-X45
β€’ Speaker Type: Polypropylene Cone, Butyl Rubber Surround (x2)
β€’ Tweeter Type: Neodymium Dome (x2)
β€’ Frequency Response: 80Hz-20kHz
β€’ Impedance: 4 Ohm
β€’ Magnet Type: 24 oz. Circuit
β€’ Mid-Woofer Voice Coil Type: 1'', Aluminum
β€’ Sensitivity: 88 dB +/- 2 dB @ 1M/1W
β€’ Anti-Thump Turn-On
β€’ Soft Turn On/O
β€’ T.H.D: <0.05%
β€’ S/N Ratio: >80dB
β€’ Channel Separation: >65dB
β€’ Amp Freq. Response:20Hz- 20kHz
β€’ Fuse: 1 x 15A
β€’ Power Supply: DC 12V
β€’ Universal Mounting Brackets Roll-Bar/Roll-Cage Diameter: 1.75’’ ~ 2.0’’ –inches
β€’ Speaker Dimensions: 6.5’’ x 7.1’’ x 9.5’’ -inches, with Bracket (-Each)
β€’ Wireless BT Network Name: β€˜ ’PyleUSA
β€’ Wireless Range: 30+ ft.
β€’ *Wireless BT Receiver Module Built-Into
Amplier of Main/Active Speaker
What’s in the Box:
β€’ (2) 5.25'' Amplied Main Speaker
β€’ Speaker Connection Wires, 6.5' ft.
β€’ (2) Butt Connectors, 16-22 AWG
β€’ (2) 1.75” Aluminum Mounting Brackets
β€’ (2) 2” Aluminum Mounting Brackets
β€’ (2) 6.5” x 0.95” x 0.67”Inches Rubber Pads
β€’ (2) 5.7” x 0.95” x 0.67”Inches Rubber Pads
β€’ (2) 6x50mm Hexagon Socket Head Cap Screws
β€’ (2) Stainless Steel Nuts
Rubber Pad
STEP 1 STEP 2 STEP 3
STEP 4 STEP 5
PLUTV53BTA Installation
1. To avoid potential shorts in the electrical system, be sure to disconnect the (-) battery cable
before installation. Use this unit with a 12-Volt battery and negative grounding only.
Failure to do so may result in a re or malfunction.
2. Speaker Mounting suggestion as below:
Step 1: Put the PLUTV53BTA speaker in a safe place.
Step 2: Slide in the buckle with rubber pad attached to the bracket stand of the speaker.
Attach the set to the handle bar of vehicle/ship.
Step 3/4: Attach screw to lock the buckle.
Step 5: Option for adjustable PYLE logo---Unbolted the screws rst, adjusting logo direction,
then re-x screws.
Step 6: Using accessories of Butt Connector to Connect Speaker wires (See Illustration 1)
Step 7: Using accessories of Butt Connector to Connect Power Cable (See Illustrations 2)


Product specificaties

Merk: Pyle
Categorie: Speaker
Model: PLUTV53BTA

Heb je hulp nodig?

Als je hulp nodig hebt met Pyle PLUTV53BTA stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Pyle

Handleiding Speaker

Nieuwste handleidingen voor Speaker