Pyle PLRGSW124BK Handleiding

Pyle Speaker PLRGSW124BK

Lees hieronder de πŸ“– handleiding in het Nederlandse voor Pyle PLRGSW124BK (4 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 24 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
Features:
β€’ 12'' Slim Waterproof Subwoofer
β€’ Completely Waterproof
β€’ For Marine or Car Use
β€’ Multi-Color RGB Lights and Remote Control
β€’ PP Cone with Rubber Edge
β€’ High-Powered Car Subwoofer
β€’ Lab Tested Pro Audio Woofer Performance
β€’ Massive Butyl Rubber Surround
β€’ High Strength Engineering Plastic Basket
β€’ Quick Connect Speaker Terminal
β€’ Compatible with Sealed Enclosure Speaker Box Audio Setup
β€’ Impressive Bass Response, Low-Resonance Frequency Output
β€’ Designed for Custom Audio Car, Truck, Mobile Vehicle Applications
Installation Guide
Screw down each of the four Phillips
head screws. The locking tabs will
swivel into place and secure the unit
to the rear surface of the drywall.
Put in the strips of adhesive to
secure the grille.
Replace the metal grille.
12'' Slim Waterproof Subwoofer
500 Watts at Dual 4-Ohms Car Audio Powered Subwoofer with Multi-Color RGB Lights
and Remote Control, PP Cone with Rubber Edge
PLRGSW124WT - PLRGSW124BK
www.PyleUSA.com
Connection Diagram
Cut the drywall.
Note: Always allow at least one-half
inch between a wall stud and the
speaker cutout or the locking tabs
will not be able to swivel into place.
Connect the speaker wires to the
speaker.
Questions? Issues?
We are here to help!
Phone: (1) 718-535-1800
Email: support@pyleusa.com
Remote Control
www.PyleUSA.com
1. Turn On/Standby: Press this key to turn unit or switch to stand by mode. At power on, unit will automatically ON
turn ON and restore to previous status.
2/9. Switch to dynamic mode from static color or switch between dynamic modes.Dynamic Mode Adjust:
3/10. Adjust dynamic playing speed. Press to increase speed and press Dynamic Speed Adjust: SPEED+ SPEED- to
decrease. Unit will switch to dynamic mode if pressing this key at static color mode.
4/5. Static Color Adjust: Switch to static color mode from dynamic mode, or switch between static colors.
6. Shortcut key to static colors. When pressing the specic color key, LED will play the same Direct Color Select:
static color. The direct colors are included in 'COLOR+ COLOR-' and ' ' operation.
7/8. Adjust static color brightness. Press to increase brightness and press Brightness Adjust: BRIGHT+ BRIGHT- to
decrease. Unit will switch to static color mode if this key is pressed at dynamic mode.
11. Press this key to switch to Demo mode. At demo mode, it plays 17 dynamic modes in loop, each Demo Mode:
mode repeat 3 times.
What's in the Box:
β€’ 12'' Slim Waterproof Subwoofer; RGB wire; remote control
Technical Specs:
β€’ Construction Materials: Engineered ABS
β€’ Power Handling: 500W Max, 250W RMS
β€’ Impedance: Dual 4 Ohms
β€’ Voice Coil: 2.5'' -int
β€’ Voice Coil Type: High-Temp Aluminum
β€’ Magnet Size: 50 Oz
β€’ Magnet Type: Barium Ferrite Magnet
β€’ Frequency Response: 20Hz - 150Hz
β€’ Sensitivity: 93 dB
β€’ Remote Control Battery Operated, Requires (1) x β€˜CR2025’ Batteries
β€’ Battery Type: 3V Lithium Battery
β€’ Battery Life: Up to 2+ Hours
β€’ Product Dimensions: 12.6'' x 11.2'' x 3.3'' –inches


Product specificaties

Merk: Pyle
Categorie: Speaker
Model: PLRGSW124BK

Heb je hulp nodig?

Als je hulp nodig hebt met Pyle PLRGSW124BK stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Pyle

Handleiding Speaker

Nieuwste handleidingen voor Speaker