Pyle PLMRF65SW Handleiding

Pyle Speaker PLMRF65SW

Lees hieronder de πŸ“– handleiding in het Nederlandse voor Pyle PLMRF65SW (3 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 20 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3
Dual 6.5’’ Waterproof-Rated Marine Speakers
with Wireless RF Streaming
Supplemental Speakers for Pyle Models: 'PLMRF65MW / PLMRF65MW'
PLMRF65SW - PLMRF65SB
PLMRF65SW
PLMRF65SB
PLMRF65SW / PLMRF65SB
Dual 6.5’’ Waterproof-Rated Marine Speakers with Wireless RF Streaming
Supplemental Speakers for Pyle Models: 'PLMRF65MW / PLMRF65MW'
Features:
β€’ Includes (2) 6.5'' Coaxial Speakers
β€’ Active Powered Speaker System
β€’ Marine Grade Waterproof-Rated Construction
β€’ Water-Resistant & Weatherproof Design
β€’ Wireless Radio Frequency (RF) Streaming Ability
β€’ RF Audio Module Supports Additional Speaker
Connectivity
β€’ Extended Range Streaming Performance
β€’ Impressive Wide-Bass Response
β€’ 2-Way Full Range Stereo Sound Reproduction
β€’ Universal Standard OEM Replacement Size
β€’ Hassle-Free Easy Access Speaker Terminals
β€’ Reinforced Surround with Dense Speaker Cone
β€’ Rugged Machined Basket & Grill with UV Resistant Housing
β€’ Used For Car, Boat, O-Road & Marine Vehicle Applications
β€’ *Supplemental Speakers Pair well with Pyle Model:
'PLMRF65MW / PLMRF65MB' (Sold Separately)
Technical Specs:
β€’ Power Output: 600 Watt MAX (300 Watt RMS)
β€’ Marine Grade Rating: IP-X4
β€’ Wireless Radio Frequency (RF) Streaming Rage: 100’+ ft.
β€’ Speaker Composition: Polypropylene Cone, Butyl Rubber Surround
β€’ Voice Coil: 1.0'', Aluminum (x2)
β€’ Tweeters: 0.5'', Neodymium Dome (x2)
β€’ Impedance: 4 Ohm
β€’ Sensitivity: 90 dB
β€’ Circuit Magnet: 20 oz.
β€’ Frequency Response: 85Hz-20kHz
β€’ Power Supply: DC 12V
β€’ Single Speaker Weight:
1.67 lbs. (-Each Speaker)
β€’ Sold as: Pair
What’s in the Box:
β€’ (2) 6.5’’ -inch Marine Speakers
β€’ Cut-Out Template
β€’ Mounting Screws
Sizes / Dimensions:
β€’ Total Diameter: 6.9’’ -inches
β€’ Cut-Out Diameter: 6.75’’ –inches
β€’ Total Depth: 3.97” -inches
β€’ Mounting Depth: 3.1’’ -inches
www.PyleUSA.com
www.PyleUSA.com www.PyleUSA.com
PLMRF65SW / PLMRF65SB
Installation Guide
PLMRF65SW/PLMRF65SB Installation
Ways to Connect
β€’ RF Wireless Audio Connection:
Install both speakers, as active powered
speakers to expand your sound system.
Connect L and R Channel speakers, each to a
12V power source. Then use pins to press the
"CH Set" buttons, simultaneously to pair the
speakers. Upon successful power connection,
the R Channel speaker LED indicator light will
shine red -- and when a successful / complete
wireless RF audio connection is made, both
speakers will shine blue.
*Note: Recommended power installation
should include a 10 amp fuse between the
power source and speakers, ensure a proper
and adequate power connection is established.
Bluetooth Audio Connection:
Once the speakers are installed and powered
to the primary speaker system - these
supplemental speaker allow you to stream and
expand the connected Bluetooth streaming audio.
Aux-in (External Audio Source) Connection:
Once the speakers are installed and powered to the primary speaker system -- these supplemental
speaker allow you to stream and expand the connected aux/external input streaming audio.
*Note: The speaker system must not be paired via Bluetooth wireless connection to allow Aux-in
audio mode.
Passive Speaker Connection:
Each speaker also has the ability to be used as a Passive-Type (un-powered) speaker. Ensure a proper
audio source connection is made via each speaker's 'Input Radio Speakers' connectors.
(Follow on
Ways to Connect
)
II
III
Signal connection
as passive speaker
Signal connection
Finding main speaker (R channel) on PLMRF65MB/or
PLMRF65MW,and using pins to push respective β€œCH Set”
simultaneously to get RF Wireless connection
as passive speaker
(Follow on
Ways to Connect
)
III
Status
POWER ON
RCA AUX-IN Connection
Bluetooth Connection
Main Speaker ( R Channel) 2nd Speaker (L Channel)
BLUE
BLUE
BLUE
RED
BLUE
BLUE
BLUE
RED
RF Wireless Connection with
PLMRF65MB/or PLMRF65MW
LED INDICATOR
β€œ Bluetooth
Pairing Tone”
1.β€œTurn on Bluetooth”
2.β€œChoose PyleUSA”
I
Main speaker (R Channel)
of PLMR65MB/PLMR65MW
I
II
III
CH Set CH Set
CH Set
L CHANNEL R CHANNEL
PLMRF65MB / PLMRF65MW
(Primary Speaker System -- Sold Separately)
PLMRF65SB / PLMRF65SW
(Supplemental Speaker System)
Important Note:
The Pyle Model: speakers are designed as supplemental / additionalPLMRF65SW / PLMRF65SB
external speakers -- to expand your audio and work with the primary marine speaker system
( -- sold separately).Pyle Model: PLMRF65MW / PLMRF65MB


Product specificaties

Merk: Pyle
Categorie: Speaker
Model: PLMRF65SW

Heb je hulp nodig?

Als je hulp nodig hebt met Pyle PLMRF65SW stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Pyle

Handleiding Speaker

Nieuwste handleidingen voor Speaker