Pyle PHBT6 Handleiding

Pyle Hoofdtelefoon PHBT6

Lees hieronder de 📖 handleiding in het Nederlandse voor Pyle PHBT6 (6 pagina's) in de categorie Hoofdtelefoon. Deze handleiding was nuttig voor 34 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/6

PHBT6

Sensitive Touch Control Panel Stereo

Bluetooth Headphone with Microphone

www.pyleaudio.com

Owner's Manual

PHBT6 with the latest technology is a stereo Bluetooth headphone with high

sensitive touch control panel. It supports the following profiles:

*HSP - Headset profile

*HFP - Hands-free profile

*A2DP - Advanced audio distribution profile

*AVRCP - Audio / video remote control profile

Overview

1) MFB (Multifunction button):

Switch on / off, pairing,

make /answer / end/ reject call.

2) Micro USB charging port

3) Built-in microphone

4) Touch panel: volume up / down,

last / next tracking, play / pause,

Charging the battery

When the headset is nearly exhausted, the Led flashes in red and “ beep” sound is

heard. You will need to charge it according to the following two steps.

Step 1: Plug the USB charging cable into USB port of PC.

Step 2: Connect charging cable with the micro USB charge port of the headset.

Note:

1) Before using this headset for the first time, please charge the battery fully.

2) It takes about 3 hours for a full charge of the headset.

3) The LED keeps in red when the headset is charging and will turn off when fully

charged.

Switch on / off the headset

1)To switch on the headset

Press and hold the MFB button (1) for 2 seconds and the LED (5) flashes in red.

Afterwards the LED flashes in red and blue alternatively, the headset enters into

pairing mode automatically.

2)To switch off the headset

Press and hold the MFB button (1) for 6 seconds until the LED flashes red and a

“beep” sound is heard.

Pairing the headset with your phone

1) Ensure the headset is turned off.

2) Place the headset and the mobile phone where they are easily viewable and no

more than one meter apart.

3) Press and hold the MFB for 3 seconds until the LED quick flashes blue and red

alternatively, and a "beep” is heard.

3) Activate your mobile phones’ Bluetooth function; please refer to your mobile

phone user guide for details.

4) Set the mobile phone to search for Bluetooth devices within range and select

“ PHBT6” from the list of devices shown.

5) Enter pass code "0000" and press "OK" to pair your headset

with mobile phone, when the pairing is completed, the LED will

flash blue regularly and the headset in standby mode.

6) Go back to your mobile phone’s main menu.

Note:

1) The pairing mode will last for 5 minutes. If the pairing failed, the headset will

automatically turn off.

2) After the initial connection, each time the headset is turned on it will seek the last

device it was connected to. If the device is turned on and in range, it will connect

automatically.

3) The battery meter will display automatically at the status bar of iPhone, iPad and

iPod once it is connected successfully. The headset will automatically power off if no

paired device is in range for 5 minutes.

Product specificaties

Merk:	Pyle
Categorie:	Hoofdtelefoon
Model:	PHBT6
Kleur van het product:	Blauw
Gewicht:	535 g
Breedte:	177.8 mm
Diepte:	152.4 mm
Hoogte:	27.9 mm
Gebruiksaanwijzing:	Ja
Bluetooth:	Ja
Continue audio-afspeeltijd:	13 uur
Connectiviteitstechnologie:	Draadloos
Meegeleverde kabels:	USB
Batterij bijna leeg-indicatie:	Ja
Draagwijze:	Hoofdband
Aanbevolen gebruik:	Oproepen/muziek
Headset type:	Stereofonisch
Impedantie:	32 Ohm
Aansluitbereik:	10 m
Microfoontype:	Ingebouwd
Accu/Batterij oplaadtijd:	3 uur
Standby tijd:	350 uur
Bedieningstoetsen:	Afspelen/pauze
Diameter van de luidspreker:	40 mm
Gesprekstijd:	20 uur
Type product:	Headset