Pyle PDWR53BTBK Handleiding

Pyle Speaker PDWR53BTBK

Lees hieronder de 📖 handleiding in het Nederlandse voor Pyle PDWR53BTBK (3 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 15 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3
What’s In The Box:
• Active Wall Mount Speaker
• Passive Wall Mount Speaker
• Power Cable
Technical Specs:
• Power Output: 300 Watt MAX
• Speaker Size:
Sound System: 5.25’’ Subwoofers: 0.5’’ Tweeters
• Subwoofer Type: Polymer PP
• Tweeter Type: Mylar Dome
• Frequency Response: 70 - 16 kHz (+/-3dB)
• Speaker Impedance: 8 Ohm
• Audio Sensitivity: 86 dB
• Construction Material:
Metal Alloy, Reinforced Polypropylene
• Power Cable Length:3.9’ ft.
• Power Supply: 120-240V
• Single Speaker Dimensions (L x W x H):
7.2'' x 6.5'' x 9.6'' -inches (Each)
PDWR53BTBK - PDWR53BTWT
WIreless BT Streaming
Mount Speaker System
Active Powered Wall Mount Home Speakers
(5.25’’ -inch, 300 Watt MAX)
Questions? Issues?
We are here to help!
Phone: (1) 718-535-1800
Email: support@pyleusa.com
Features:
• Versatile Wall Mount Speaker System
• Includes (2) Speakers (Active + Passive)
• Universal Indoor Home Speaker Installation
• Bluetooth Wireless Music Streaming
• Built-in Digital Sound Amplier
• 2-Way Full Range Stereo Sound Reproduction
• Impressive Bass Response
• Rear Panel Audio Settings Control Center
• Connect & Stream Audio from External Devices
• RCA (L/R) Audio Connector Jacks
• Aux (3.5mm) Input Jack (Loop + Sub)
• Screw Terminal Block Speaker Connectors
(Active Speaker)
• Rotary Volume, Bass, Treble Adjustment
• Power LED Indicator Light
• Adjustable Angle Wall Mount Brackets
• Rugged & Heavy Duty Cabinet Enclosure
• Unique Standby / Auto Power On with Audio Signal Input
• Removable & Rust Proof Metal Speaker Grills
• Daisy-chain Ability (Active to Passive Speaker)
Stereo System
• Used for Home, Garage, Enclosed Patio & Porch Deck
Applications
• Recommended for Indoor Use Only
Wireless BT Streaming Connectivity:
• Built-in BT for Wireless Music Streaming
• Simple & Hassle-Free Pairing
• Works with All of Today’s Latest Devices
(Smartphones, Tablets, Laptops, Computers, etc.)
• Wireless BT Version: 4.2
• Wireless BT Network Name: ‘ ’PyleUSA
• Wireless Range: 33’+ ft.
INSTALLATION
Connecting Speakers
1. Use the wire on the back of the speaker in the output
tab of the amplier (or radio ampliers). The standard
colors on the terminals are red Positive (+) and black
Negative (-). Connect the red wire of the amplier to
speakers (+) tab. Connect one end of the black wire (-) to
the other tab. Connect each speaker to make sure that is
not (+,-) inverted polarity. If the polarity of the speakers is
reversed, the sound will be unnatural and will play
without bass.
2. There will be a prompt sound when BT is connected.
3. Since there is no priority set in audio input, please don’t
use BT and line in inputs simultaneously, otherwise
sound is mixed.
Stereo Connection
Rear Panel Specication
Remark
4. LOOP: Signal output, connect to active ampliers.
5. SUB: Bass output, connect to active ampliers
(SUB amplier is better).
6. Speaker Output: Connect to passive speakers.
7. LED Indicator: During power mode, light is constantON
blue color; During power mode, lights goes o AUTO
when there is no signal input and it turns to blue color
when signal comes.
11. Power switch: When this switch is on Auto position, the
amplier will automatically turn on when a signal is
present and it will go standby when there is no signal
input.
Under power Vs. Over power
1. Most speaker damage is caused by ampliers with too
little power (wattage).
2. An overdriven amplier clips the waveforms and leads
to speaker distortion.
3. Clipping is usually audible and it may vary from harsh
sound to a fuzzy or unclear sound.
4. If you hear the clipping at high volume levels, turn down
the volume until the distortion is gone.
5. Damage caused by operating the speakers at distorted
volume levels is not covered by the warranty.
SAFETY INSTRUCTIONS
1. When the speakers are installed in the wall, ensure the
wall structure is reliable and that the speakers are rmly
attached.
2. Install the speaker in a location that can structurally
support the weight of the speaker and its mounting
hardware. Otherwise it may result in the unit falling down
and causing personal injury.
3. Do not use nails, adhesives or other unauthorized devices.
Long-term use and vibrations may cause it to fall easily.
4. Do not touch or bump the woofer and tweeter. If these
are damaged, the sound will be distorted.
5. Lower the sound volume when you are changing the
input source (for example, to tune FM/CD). Make sure
that the power amp/amplier device radio is turned o
when installing or removing the cables.
Users Have a Responsibility to Place or Install Safety
The speakers that are placed in the holder can be either
wall or ceiling type, using screws to be placed inside of
the speakers in the back is optional.
1. Mark the mounting bracket as a template with the
regional location of the hole slots.
2. Then use the appropriate hardware and tools (not-
supplied) to properly x it to the bracket wall/ceiling.
3. Place the speakers to the bracket using the screws and
washers according to the speaker.
PACKING LIST
Speaker Power Cable User Manual
1. Aux Input
2. RCA Input
3. Balance Input
4. Loop Output
5. Sub Output
6. Speaker Output
7. LED Indicator
8. Treble Adjustment
9. Bass Adjustment
10. Volume Control
11. Power Switch
12. AC Power Cord


Product specificaties

Merk: Pyle
Categorie: Speaker
Model: PDWR53BTBK

Heb je hulp nodig?

Als je hulp nodig hebt met Pyle PDWR53BTBK stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Pyle

Handleiding Speaker

Nieuwste handleidingen voor Speaker