Pyle PDWM5900 Handleiding

Pyle Microfoon PDWM5900

Lees hieronder de 📖 handleiding in het Nederlandse voor Pyle PDWM5900 (4 pagina's) in de categorie Microfoon. Deze handleiding was nuttig voor 14 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

RECEIVER

Frequency: 902~926.75MHz

Frequency Stability 10ppm：

Sensitivity: 13dBuV

Adjacent channel rejection 75dB：

Image rejection: 95dB

Audio Output 200MV：

Output Impedance: XLR connector: 200 ; 1 / 4 inch connector: 1kΩ Ω

S/N ratio: 100dB

0.1%

Frequency response: 50Hz-15KHz

: 60m

Power supply: DC12V--18V

Housing: Metal

Size(WxDxH): 16.5”x7”x1.8”

Weight: 3.3 lbs

MICROPHONE

Frequency: 902~926.75MHz

Frequency Stability: 10ppm

Transmitting power: <10mW

Spurious emission: >65dB

Modulation: FM

Max modulation: 75K

Power supply: 3V (2 AA batteries)

Current consumption: 120mA

Total Harmonic Distortion: <

Operating Range

SPECIFICATIONS

FRONT PANEL

1. CH- A Volume control

2. CH-A channel UP

3. CH-A channel DOWN

4. Infrared (IR) port

5. CH-A Sync Button

6. CH-A display

REAR PANEL

13. Antenna jack B

14. Balanced XLR output jack B

15. Mixed 1 / 4 " output jack

16. DC input jack

17. Balanced XLR output jack A

18. Antenna jack A

RECEIVER

ANT-B ANT-A

BALANCED OUT B MIXE D OUT

13 14 15 16 17 18

1. Connect one end of supplied 6.35mm to 6.35mm plug audio cable

into MIXED OUT(15) on rear panel of the receiver. Connect the

other end of the audio cable into "MIC IN" or "AUX IN" of amplifier

or mixer.

2. Connect DC plug of supplied AC/DC adapter to DC INPUT(16) jack

on rear panel of the receiver. Connect AC plug of AC/DC adapter to

mains power socket.

3. Press POWER(12) button on front panel to turn on the receiver.

4. Press CH-A UP(2) or DOWN(3) buttons to set receiver CH-A

7. CH-B display

8. CH-B Sync Button

9. CH-B channel DOWN

10. CH-B channel UP

11. CH- B Volume control

12. Power On/Off switch

OPERATION

HANDHELD MIC

1. Mesh(capsule inside)

2. LCD display(IR port)

3. Power on/off switch

4. IR port

5. Battery cover/compartment

12 3 4

OPERATION

1. Open battery cover and install 2PCS AA batteries into battery

compartment with correct polarity(match + and - signs).

2. Press and hold power button to turn on microphone.

3. Point microphone IR port to receiver IR port and press CH-A SYNC

button to set first microphone frequency to be same as receiver CH-

A frequency. Press CH-B SYNC button to set second microphone

frequency to be same as receiver CH-B frequency.

4. Receiver RF indicator will display in receiver screen.

5. During operation if power LED indicator lights red, this indicates

the battery is Iow. Please replace new battery.

6. After use please press and hold power button to turn off

the microphone. If you are not going to use this system for a long

period of time please take out the batteries from

the microphone to avoid possible battery leakage which may

damage the microphone.

1 2 3 4 5 6 8 9 10 117 12

frequency. Then press CH-B

receiver CH-B frequency.

NOTE: Please must set CH-A and CH-B in different frequencies.

5. Adjust receiver volume(1, 11) and your amplifier or mixer volume to

suitable level.

UP(10) or DOWN(9) buttons to set

Product specificaties

Merk:	Pyle
Categorie:	Microfoon
Model:	PDWM5900
Microfoontype:	Draagbare microfoon
Signaal/ruis-verhouding:	100 dB
Totale harmonische vervorming (THD):	0.1 procent
Receiver afmetingen (B x D x H):	419.1 x 177.8 x 45.72 mm
Ontvanger type:	Rekgemonteerde ontvanger
Frequentierespons microfoon:	50 - 15000 Hz
Ontvangerdisplay:	Ja
Type werkfrequentie:	Ultrahoge frequentie (UHF)
Receiver gewicht:	3592 g
Aantal ontvangers inbegrepen:	1
Aantal microfoons inclusief:	2
Behuizingmateriaal ontvanger:	Metaal