Pyle PCB3BK Handleiding

Pyle Speaker PCB3BK

Lees hieronder de 📖 handleiding in het Nederlandse voor Pyle PCB3BK (2 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 54 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
www.PyleUSA.com
Features:
Installation
MOUNTING THE BRACKET
Pull out half of the key at the back of the speaker, then insert the support through the hole
on the key, and the support is xed to the wall.
Visit Our Website
SCAN
PyleUS
USER GUIDE
3"100 Watt Mini Cube
Speaker Pair
Full Range Mini Speaker System
Great for Home Theater Applications
Video Shielded
3" Paper Cone Driver
Power Handling: 100 Watts Peak
Frequency Response: 90 Hz - 18 kHz
8 Ohm Impedance
Dimensions: 3.6" (H) x 3.6" (W) x 4.6” (D)
MOUNTING
FINAL ADJUSTMENTS
1. After checking that the speaker is in phase and works correctly, angle the speaker for the
best sound.
2. Hand-tighten the bracket knobs only. Power tools may over-tighten the knob and strip
the threads of the insert.
3. Check that the entire installation is safe and secure.
Connecting Your Speakers
California Prop 65 Warning
WARNING:
This product can expose you to chemicals, which is known to
the state of California to cause cancer birth defects and other
reproductive harm. Do not ingest.
For more info go to: www.P65warnings.ca.gov
Questions or Comments?
We are here to help!
Phone: 1.718.535.1800
PyleUSA.com/ContactUs
Connecting the speakers to your amplier
or receiver.
First, turn your amplier o to avoid
damage which may result from accidental
shorting of the speaker leads.
Correct phase polarity is critical for proper
stereo imaging and bass performance.
The red (+) terminal on your amplier or
receiver must be connected to the red (+)
terminal on your speaker; the same applies
to the black (-) terminal.
Connect one loudspeaker at a time to
ensure proper connection of left and right
channels. Make sure all wires are rmly
fastened.
If you notice a high level of bass or central
image focus, double-check your connections
for proper polarity.


Product specificaties

Merk: Pyle
Categorie: Speaker
Model: PCB3BK
Kleur van het product: Zwart
Breedte: 91.44 mm
Diepte: 116.8 mm
Hoogte: 91.44 mm
Connectiviteitstechnologie: Bedraad
Type stroombron: Niet ondersteund
Gemiddeld vermogen: - W
Equalizer-instellingen: Nee
Impedantie: 8 Ohm
Audio-uitgangskanalen: 2.0 kanalen
Speaker plaatsing: Tafelblad/Boekenplank
Aantal drivers: 2
Woofer: Nee
Diameter driver subwoofer (imperiaal): 3 "
Diameter driver: 76.2 mm
Peak Music Power Output (PMPO): 100 W
Frequentiebereik: 90 - 18000 Hz
Versterker: Nee
Magnetisch afgeschermd: Ja
Aantal producten inbegrepen: 2 stuk(s)
Driver cone material: Papier

Heb je hulp nodig?

Als je hulp nodig hebt met Pyle PCB3BK stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Pyle

Handleiding Speaker

Nieuwste handleidingen voor Speaker