Pure Acoustics BQ 360 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Pure Acoustics BQ 360 (1 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 27 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
Take the cardboard template that comes with the speakers and
place it where you want the speaker to be mounted.
Draw around the template and cutout the speaker mounting hole.
Run quality speaker wire (12-16 gauge ) to that location.
Carefully pry off the grill from the speaker either using a small
screwdriver at the edge of the grill or with a small awl catching the
grill by one of its holes.
Connect the speaker wire to the speaker terminals and insert the
speaker into the hole.
There are screws around the perimeter of the face of the speaker
(6 on the inwalls). These screws connect to ‘wings’ in the rear of the
speaker which will swing out and clamp the speaker to the wall as they
are tightened.Secure the speaker to the wall by tightening these screws
until the speaker is securely mounted.
Reattach grill.
That’ s It ! Enjoy !
In-wall Speakers
Cutout Dimension
BQ260: 183x183mm
BQ108: 247x247mm
BQ260/108


Product specificaties

Merk: Pure Acoustics
Categorie: Speaker
Model: BQ 360

Heb je hulp nodig?

Als je hulp nodig hebt met Pure Acoustics BQ 360 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Pure Acoustics

Handleiding Speaker

Nieuwste handleidingen voor Speaker