Privileg PWT C6512P N Handleiding

Privileg Wasmachine PWT C6512P N

Lees hieronder de 📖 handleiding in het Nederlandse voor Privileg PWT C6512P N (4 pagina's) in de categorie Wasmachine. Deze handleiding was nuttig voor 96 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

1 Programme selector

2 “Start/Pause” button

3 “Reset/Drain” button

4 Programme sequence indication

5 Child lock combination

6 “Temperature” button

7 “Start delay” button

8 “Soil level” button

9 “Spin speed” button

(incl. Rinse hold )

10 Temperature indication

11 Time indication

INDICATORS

Detergent overdosage

Door locked

Failure: Service

Failure: Clean lter

Failure: Water tap closed

In the event of any failure, refer to the

“TROUBLESHOOTING” section

CONTROL PANEL

PROGRAMME CHART

PRODUCT DESCRIPTION

1. Lid handle

2. Lid

3. Control panel

4. Detergent dispenser

5. Drum

6. Water lter - behind the cover

7. Mobility lever (depending on model)

8. Adjustable feet (x2)

DETERGENT DISPENSER

Main wash compartment

Detergent for the main wash, stain remover or

water softener.

Prewash compartment

Detergent for the prewash.

Softener compartment

Fabric softener. Liquid starch. Bleach.

Pour in softener, starch or bleach solution

only up to the “max” mark.

Release button 

Press to remove tray for cleaning.



Quick guide

Before using the appliance carefully read the Safety Instruction.

Before using the machine, it is imperative that the transport bracket is removed.

For more detailed instructions on how to remove it, see the Installation Guide.

10 4

7 8 9

Max load 6,5 Kg

Power consumption in o-mode 0,11 W / in left-on mode 0,11 W Detergents and additives Recommended

detergent

Residual

dampness % *

Energy con-

sumption kWh

Total water lt

Loundry

temperature °C

Programme

Temperatures Max, spin

speed

(rpm)

Max

load

(kg)

Duration

(h : m)

Pre-

wash

Main

wash Softener

Powder Liquid

Setting Range

Turn & Go 30°C 30°C 1000 3,5 ** –   –– – – –

Synthetics Synthetik 40°C 20 - 60°C 1200 3,0 1:40      40 0,52 50 40

Cotton Baumwolle 60°C 20 - 95°C 1200 6,5 2:35      57 1,10 51 55

Eco 40-60 40°C 40°C

1151 6,5 3:20 –     53 0,84 55 40

1151 3,25 2:30 –     53 0,44 39 33

1151 1,5 1:50 –     53 0,29 31 30

Mix 45’ 40° 40°C 40°C 1000 6,5 ** –     – – – –

Gym kit Sportkleidung 40°C 20 - 40°C 1000 3,5 **   –– – – – –

20 °C 20°C 20°C 1200 6,5 3:15 –   –53 0,25 48 20

Wool 20° Wolle 20° 20°C 20°C 1000 1,0 ** –   –– – – –

Delicates

30° Feinwäsche 30° 30°C 30°C 1000 1,5 ** –   –– – – –

Colours 40° Buntwäsche 40° 40°C 40°C 1200 3,5 ** –     – – – –

Cotton 30° Baumwolle 30° 30°C 30°C 1200 3,0 0:30 –   –62 0,25 42 26

Synthetics

30° Synthetik 30° 30°C 30°C 1200 3,0 ** –   –– – – –

Spin + Drain Schleudern +

Abpumpen – – 1200 6,5 ** – – – – – – – – –

Rinse + Spin Spülen +

Schleudern – – 1200 6,5 ** – – – – – – – –

  Dosing required Dosing optional

the programmes, without options. The values given for programmes other than the eco 40-60

programme are indicative only.

* After programme end and spinning with maximum selectable spin speed, in default

programme setting.

** The duration of the programme is shown on the display.

The sensor technology adapts water, energy and programme duration to your wash load.

Eco 40-60 - Test wash cycle in compliance with 2019/2014 regulation. The most ecient

programme in terms of energy and water consumption for washing normally soiled cotton

laundry. Display only: Spin speed values shown on the display can slightly diers from the

values stated in the table.

For all Test Institutes

Long wash cycle for cottons: set wash cycle Cotton with a temperature of 40°C.

Synthetic program along: set wash cycle Synthetics with a temperature of 40°C.

This data may dier in your home due to changing conditions in inlet water temperature,

water pressure etc. Approximate programme duration values refer to the default setting of

THANK YOU FOR CHOOSING OUR PRODUCT.

PROGRAMMES

For choosing the appropriate programme for your kind of

laundry, always respect the instructions on the care labels of

the laundry. The value given in the tub symbol is the maximum

temperature possible for washing the garment.

Turn & Go

The best daily washing solution. Particularly useful for lightly and normally

soiled textiles made of cotton or synthetic fabrics, as it washes at low

temperature and a maximum spin speed.

Synthetics

For washing soiled garments made from synthetic fibres (such as polyester,

polyacrylic, viscose, etc.) or cotton/synthetic blends.

Cotton

Normally to heavily soiled and robust cottons.

Eco 40-60

For washing normally soiled cotton garments declared to be washable at 40

°C or 60 °C, together in the same cycle. This is the standard cotton programme

and the most ecient in terms of water and energy consumption.

Mix 45’ 40°

For washing lightly to normally soiled garments in cotton, linen, synthetics

bers and mixed bers in just 45 minutes.

Gym kit

Normally soiled and sweaty sportswear made of cotton jersey or

microbers. Includes a prewash cycle – you can add detergent also to the

prewash chamber. Do not use softener.

20 °C

For washing lightly soiled cotton garments, at a temperature of 20 °C.

Wool 20°

All wool garments can be washed using programme ‚ “Wool“ even those

carryng the “hand-wash only“ label. For best results, use special detergents

and do not exceed max kg declaration of laundry.

Delicates 30°

For washing particularly delicate garments. Preferably turn garments inside

out before washing.

Colours 40°

From lightly to normally soiled laundry made of cotton, synthetics or their

blends; also delicates. Helps preserving colours.

Cotton 30°

For washing lightly soiled garments quickly. This cycle lasts only 30 minutes,

saving time and energy.

Synthetics 30°

Enshorted cycle for lightly soiled garments made from synthetic bres (such

as polyester, polyacrylic, viscose, etc.) or cotton/synthetic blends.

Spin + Drain

Spins the load then empties the water. For robust laundry.

Rinse & Spin

Separate rinse and intensive spin programme. For robust laundry.

FIRST TIME USE

To remove any manufacturing debris select the “Cotton” programme at a

temperature of 95 °C. Pour a small quantity of detergent powder into the

main wash compartment of the detergent dispenser (maximum 1/3 of

the quantity the detergent manufacturer recommends for lightly soiled

laundry). Start the programme .without adding any laundry

DAILY USE

Prepare your laundry according to the recommendations in the “HINTS

AND TIPS” section. Load the laundry, close the drum door and check that

it is closed properly. Pour in the detergent and any additives. Observe the

dosing recommendations on the detergent pack. Close the lid. Turn the

programme selector to the desired programme and select any option

if needed. The display shows the duration of the selected programme

(in hours and minutes), and the indicator for the “Start/Pause” button

flashes. The temperature and spin speed can be changed by pressing

the “Temperature” button or the “Spin Speed” button. Open the tap and

press the “Start/Pause” button to start the wash cycle. The “Start/Pause”

indicator will lights up and the door will be locked. Due to variations in load

and temperature of inlet water, the remaining time is newly calculated in

certain programme phases. If this is the case, an animation appears

on the time display.

PAUSE OR CHANGE A RUNNING PROGRAMME

To pause the wash cycle, press the “Start/Pause” button, the indicator

light blinks. Select any new programme, temperature, options or spin speed

if you wish to change those settings. Press the “Start/Pause” button again

to start the wash cycle from the point at which it was interrupted. Do not

add detergent for this programme.

DOOR LOCKED

After start of a program the lamp lights up to indicate that the lid can not

be opened. As long as a wash programme is running, the lid remains locked

and must on no account be forced open. In case you have an urgent need

to open it during a running programme, for example to add more laundry,

or to remove laundry which was loaded by mistake, press the “Start/Pause”

button. If the temperature is not too high, the “Door locked” indicator

light turns off. It may last a while until you can open the lid. Press “Start/

Pause” button to proceed with the programme again.

PROGRAMME END

The “Door locked” indication light goes off and the display shows

. Turn the programme selector to the “OFF” position and close the water

tap. Open the lid and drum and unload the machine. Leave the lid open for

some time to allow the interior of the machine to dry. After about a quarter

of an hour, the washing machine will switch off completely to save energy.

To cancel a running programme before the end of cycle, press the

“Reset/Drain” button for at least 3 seconds. The water is drained out. It may

last a while until you can open the lid.

OPTIONS

! When the combination of programme and additional option(s) is not

possible, the indication lights switch o automatically.

! Unsuitable combinations of options are deselected automatically.

Temperatur (Temperature)

Every programme has a predefined temperature. If you want to change

the temperature, press the “Temperature” button. The value appears on the

display.

Bügelleicht (Easy ironing)

By selecting this option, the wash and the spin cycles will be modified in

order to reduce the formation of creases.

Startzeitvorwahl (Start delay)

To set the selected programme to start at a later time, press the “Start delay”

button to set the desired delay time. The lamp for the

“Start delay” option button lights up, and it goes off when the programme

starts. Once having pressed the “Start/Pause” button, the countdown

of the time delay begins. Number of hours preselected can be reduced by

pressing the “Start delay” button again. Do not use liquid detergent when

activating this option. To cancel the “Start delay” turn the programme

selector to another position.

Vorwäsche (Prewash)

Only for heavily soiled loads (for example sand, granular dirt). Increases the

cycle time by approximately 15 min. Do not use liquid detergent for the

main wash when activating the Prewash option.

Extra Spülen (Extra rinse)

Helps to avoid detergent residues in the laundry by extending the rinse

phase. Particularly suitable for washing baby laundry, for people suffering

from allergies and for areas with soft water.

Verschmutzungsgrad (Soil level)

It is an option working on 3 different levels (lightly soiled, normaly soiled,

heavily soiled) that are specially designed to set the right washing action,

depending on your cleaning needs:

Heavily soiled : this option is designed for high levels of dirtiness,

removing most stubborn stains.

Normaly soiled : this option is designed to remove everyday stains.

Lightly soiled : this option is designed to remove lightly soiled stains.

Schleuderdrehzahl (Spin speed) (incl. Rinse hold )

Every programme has a predefined spin speed. Press the button to set

another spin speed. If you select spin speed “0” , the final spinning is

cancelled and the water is drained out only. However, intermediate spin

phases remain during the rinse.

If you select “Rinse hold” , the laundry remains in the last rinse water

without progressing to the final spin cycle, to avoid creasing and prevent

colours from changing. To activate the “Rinse hold” , press the “Spin speed

button repeatedly until the “Rinse hold” symbol on the display lights

up. The wash programme stops to “Rinse hold” when the “Rinse hold”

symbol on the display blinks; the light of “Start/Pause” button also blinks.

To terminate the “Rinse hold” by spinning the laundry, press “Start/Pause”

button - the laundry will be spun with the default spin speed. You can also

select another spin speed with the “Spin speed button before you start the

spin cycle by pressing “Start/Pause” . To terminate the “Rinse hold”

by draining the water without spinning, press the “Spin speed button until

spin speed “0” appears on the display; then press “Start/Pause” button

to start the draining. Do not leave the laundry to soak for too long in the

“Rinse hold” (especially silk).

Extra Waschen (Intensive wash)

Choose this option if you use an in-wash additive for stain removal - it will

optimize the additive’s eciency to get better wash performance and

stain removal. Use with the maximum load. Add an appropriate of in-wash

additive for stain removal (powder) to the main wash

May prolong the programme by up to 10 minutes. Appropriate for use of

stain removers and bleaches on oxygen basis. Chlorine or perborate bleches

must not be used!

Energiesparen (Energy saver)

Saves energy used for water heating while maintaining good wash result.

Recomentable for lightly soiled laundry without stains.

Make sure that your detergent is suitable for cold wash temperatures

(15 or 20 °C). Mainly selectable on the lowest temperature step of the

programmes.

CHILD LOCK

You can lock the buttons of the control panel against improper use (e.g.

by children). Press both of the child lock buttons simultaneously and hold

them for at least 3 seconds. The key symbol on the display lights up.

To unlock the buttons again proceed in the same way.

BLEACHING

Wash your laundry in the desired programme, Cotton or

Synthetics , adding an appropriate amount of chlorine bleach to the

Softener chamber (close the lid carefully). Immediately after the end

of the programme, turn the “Programme selector” and start the desired

programme again to eliminate any residual bleach smell; if you want, you

can add softener. Never put both chlorine bleach and softener into the

softener chamber at the same time.

HINTS AND TIPS

Sort your laundry according to

Type of fabric/care label (cotton, mixed fibres, synthetics, wool, handwash

items). Colour (separate coloured and white items, wash new coloured

items separately). Delicates (wash small items – like nylon stockings – and

items with hooks – like bras – in a cloth bag or pillow case with zip).

Empty all pockets

Objects like coins or lighters can damage your laundry as well as the drum.

Appliance interior

If you never or seldom wash your laundry at 95°C, we recommend to

occasionally run a 95°C programme without laundry, adding a small amount

of detergent, to keep the interior of the appliance clean.

Follow the dosage recommendation / additives

It optimizes the cleaning result, it avoids irritating residues of surplus

detergent in your laundry and it saves money by avoiding waste of surplus

detergent

Use low temperature and longer duration

The most ecient programmes in terms of energy consumption are generally

those that perform at lower temperatures and longer duration.

Observe the load sizes

Load your washing machine up to the capacity indicated in the “PROGRAMME

CHART” table to save water and energy.

Noise and remaining moisture content

They are inuenced by the spinning speed: the higher the spinning speed

in the spinning phase, the higher the noise and the lower the remaining

moisture content.

CLEANING & MAINTENANCE

For any cleaning and maintenance, switch off and unplug the washing

machine. Do not use flammable fluids to clean the washing machine. Clean

and maintain your washing machine periodically (at least 4 times per year).

Cleaning the outside of the washing machine

Use a soft damp cloth to clean the outer parts of the washing machine. Do

not use glass or general purpose cleaners, scouring powder or similar to

clean the control panel – these substances might damage the printing.

Detergent dispenser

Clean regularly, at least three or four times a year, to prevent detergent

build-up:

Press the release button to release the detergent dispenser and remove 

it. A small quantity of water can remain in the dispenser, thus you should

carry it in an upright position. Wash the dispenser using running water. You

can also remove the siphon cap on the back of the

dispenser for cleaning. Replace the siphon cap in the dispenser (if removed)

Reinstall the dispenser by locating the dispenser’s bottom tabs into the

appropriate openings on the lid, and by pushing the dispenser against

the lid until it locks into place. Make sure that the detergent dispenser is

correctly reinstalled.

Checking the water supply hose

Check the inlet hose regularly for brittleness and cracks. If damaged, replace

it by a new hose available through our After-Sales Service or your specialist

dealer. Depending on the hose type: If the inlet hose has a transparent

coating, periodically check if the colour intensifies locally. If yes, the hose

may have a leak and should be replaced. For water stop hoses (If

availeable): check the small safety valve inspection window (see arrow).

If it is red, the water stop function was triggered, and the hose must be

replaced by a new one. For unscrewing this hose, press the release button (if

available) while unscrewing the hose.

Cleaning the mesh filters in the water supply hose

Check and clean regularly (at least two or three times a year).

Close the tap and loosen the inlet hose on the tap. Clean the internal mesh

filter and screw the water inlet hose back onto the tap. Now unscrew the

inlet hose on the rear of the washing machine. Pull off the mesh filter from

the washing machine connection with universal pliers and clean it. Refit the

mesh filter and screw the inlet hose on again. Turn on the tap and ensure

that the connections are completely water-tight.

Cleaning the water filter / draining residual water

The washing machine is provided with a self-cleaning pump. The filter

keeps objects like buttons, coins, safetypins etc. which have been left in the

laundry. If you used a hot wash programme, wait until the water has cooled

down before draining any water. Clean the water filter regularly, to avoid

that the water cannot drain after the wash due to obstruction of the filter. If

the water cannot drain, the indicator indicates that the water filter may be

clogged.

Open the filter cover with a coin. Place a broad, flat container beneath the

water filter, to collect the drain water. Slowly turn the filter counterclockwise

until water flows out. Let the water flow out, without removing the filter.

When the container is full, close the water filter by turning it in clockwise.

Empty the container. Repeat this procedure until all the water has drained.

Lay a cotton cloth beneath the water filter, which can absorb a small

amount of rest water. Then remove the water filter by turning it out anti

clockwise. Clean the water filter (remove residues in the filter and clean it

under running water) and the filter chamber. Make sure the pump impeller

(in the housing behind the filter) is not obstructed. Insert the water filter

and close the filter cover: Reinsert the water filter again by turning it in

clockwise direction. Make sure to turn it in as far as it goes. To test water

tightness of the water filter, you can pour about 1 liter of water into the

drum and check that water does not leak from the filter. Then close the filter

cover.

Lid seal

Check the condition of the lid seal periodically and clean it from time to

time with a damp cloth.

Recovering an object that falls between the drum and the tub

If an object accidentally falls between the drum and the tub, you can

recover it thanks to one of the removable drum lifters.

Unplug the washing machine. Remove the laundry from the drum. Close

the drum flaps and turn the drum a half-turn (picture ). Using a screw-a

driver press on the plastic end, while sliding the lifter from left to right

(picture , ) by hand it will fall into the drum. Open the drum. You can b c

recover the object through the hole in the drum. Refit the lifter from inside

the drum: Position the plastic tip above the hole on the right side of the

drum (picture ). Then slide the plastic lifter from right to left until it clips. d

Close the drum flaps again, turn the drum through half a turn and check the

positioning of the blade at all its anchorage points. Plug the washing

machine in again.

TRANSPORT AND HANDLING

Pull out the mains plug, and close the water tap. Disconnect the inlet hose

from the water tap, and remove the drain hose from your draining point.

Remove all rest water from the hoses and washing machine and fix hoses

so that they cannot get damaged during transport. To facilitate moving the

machine, pull the mobility lever situated at the bottom front (if available

on your model) out a little by hand. Pull the washing machine out to the

stop with the foot. Afterwards push the mobility lever back into the original

stable position. Refit the transport bracket. Follow the instructions for

removing the transport bracket in the INSTALATION GUIDE in reverse order.

abcd

Quick guide

Product specificaties

Merk:	Privileg
Categorie:	Wasmachine
Model:	PWT C6512P N

Heb je hulp nodig?

Als je hulp nodig hebt met Privileg PWT C6512P N stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Wasmachine Privileg

Privileg PWT D61253P Handleiding

27 Februari 2024

Privileg Dynamic 7620 Handleiding

4 Februari 2023

Privileg Classic 3820 Handleiding

4 Februari 2023

Privileg PWT C S6245E Handleiding

17 Juli 2023

Privileg CCPFU843 Handleiding

4 Februari 2023

Privileg PWT C623 N Handleiding

8 Juli 2023

Privileg Dynamic 5922 Handleiding

4 Februari 2023

Privileg PWWT X 86H69 Handleiding

30 Juni 2023

Privileg Dynamic 78618 Handleiding

4 Februari 2023

Privileg PWF X 104 A Handleiding

24 Juni 2023

Handleiding Wasmachine

Nieuwste handleidingen voor Wasmachine

Candy CSTG 482D2/1-47 Handleiding

24 November 2024

Candy EY 1292DE/1-47 Handleiding

24 November 2024

Candy CSW2852DW4/1-47 Handleiding

24 November 2024

Candy CSTG 28TVR2/1-47 Handleiding

24 November 2024

Candy CSTG 27L3/1-47 Handleiding

24 November 2024

Candy CSTG 28L2/1-47 Handleiding

24 November 2024

Candy CSTG 082D2/1-47 Handleiding

24 November 2024

Panasonic NA-FD12VR1 Handleiding

24 November 2024

Panasonic NA-S96FR1BVT Handleiding

24 November 2024

Candy CS4 272DWB4/1-11 Handleiding

24 November 2024