Power Dynamics OCS3 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Power Dynamics OCS3 (12 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
OCS Series Outdoor Column Speaker 100V IPX4
Ref. nr.: 952.226; 952.228
INSTRUCTION MANUAL
GEBRUIKSAANWIJZING
BEDIENUNGSANLEITUNG
MANUAL DE INSTRUCCIONES
MANUEL D'INSTRUCTIONS
INSTRUKCJA OBSŁUGI
V1.0
2
3
ENGLISH
Congratulations to the rchase of this Power Dynamics product. Please read this manual thoroughly prior to using the unit in pu
order to benet fully from all features.
Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to
avoid re and/or electrical shock. Repairs must only be carried out by a qualied technician in order to avoid electrical shock.
Keep the manual for future reference.
- The unit contains voltage carrying parts. Therefore do NOT open e housing. th
- Do not place metal objects or pour liquids into the unit This may cause electrical shock and malfunction.
- Do not place the unit near heat sources such as radiators, etc. Do not place the unit on a vibrating surface. Do not cover the
ventilati es. on hol
- The unit is not suitable for continuous use.
- If the lead damaged, must be replaced by a qualied technician. is it
- If the unit is damaged to such an extent that internal parts are visible, do NOT plug the unit into a mains outlet and DO NOT
switc the unit on. Contact your dealer. Do. h
- All repairs should be carried out by a qualied technician only.
- To prevent accidents in companies, you must follow the applicable guide lines and follow the instructions.
- Keep the unit out of the reach of children. Do not leave the unit unattended.
- Do not use cleaning sprays to clean switches. The residues of these sprays cause deposits of dust and grease. In case of
malfunction, always seek advice from a specialist.
- Do not force the controls.
- This unit is with spea r inside which can cause magnetic eld. Keep this unit at least 60cm away from computer or TV. ke
- If the unit has fallen, always have it checked by a qualied technician before you switch the unit on again.
- Do not use chemicals to clean the unit. They dam e the varnish. Only clean the unit with a dry cloth. ag
- Keep away from electronic equipment that may cause interference.
- Only use original spares for repairs, otherwise serious damage and/or dangerous radiation may occur.
- Keep the original packing material at you can transport the unit in safe conditions.so th
This mark attracts the attention of the user to important instructions that are contained in the manual and that he should
read and adhere to.
The unit has been certied CE. It is prohibited to mak changes to the unit. They would invalidate the CE certicate and e any
their guarantee!
NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and
35 95°C/ °F .
Electric products must not be t into household waste. Please bring them to a recycling centre. Ask your local authorities or your pu
dealer about the way to proceed. The specications are typical. The actual values can slightly change from one unit to the other.
Specications can be c d without prior notice.hange
INSTALLATION
Cabling of a 70/100 Volt system belongs to an electrical installation which may only be carried out by a qualied electricia n!
The total load must not exceed the rated power of the amplier. Before starting e installation, make clear how many speakers , th
you want to install in the room, and with what wattage(s), as overload will damage the amplier and speaker.
Procedure:
Step 1: If the 70/100Volt system is turned on, turn it o before connecting.
Step 2 nnect the speaker(s) to the 70/100V amplier output, using a two-core 100Volt suitable cable. For the : Co
wiring diagram, see later in this manual.
Always insulate the unused connection cables.
Step 3: If you are connecting multiple speakers, ma re that all speakers have the same polarity and that the ke su
amplier is not overloaded.
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would also invalid
your warranty. The war is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings ranty
contained in this manual. Power Dynamics cannot be held responsible for personal injuries caused by a disrespect of the safety
recommendations w ings. This is also applicable to all damages in whatever form. and arn


Product specificaties

Merk: Power Dynamics
Categorie: Speaker
Model: OCS3
Kleur van het product: Wit
Gewicht: 3600 g
Breedte: 495 mm
Diepte: 155 mm
Hoogte: 115 mm
Materiaal behuizing: Aluminium, Metal, Plastic
Type stroombron: AC
Gemiddeld vermogen: 30 W
Aantal per verpakking: 1 stuk(s)
Geschikt voor buitengebruik: Ja
Speaker plaatsing: Muur-montage
Frequentiebereik: 90 - 16000 Hz
Gevoeligheid: 91 dB
Montagebeugels meegeleverd: Ja
AC-ingangsspanning: 100 V
Roostermateriaal van luidspreker: Metaal

Heb je hulp nodig?

Als je hulp nodig hebt met Power Dynamics OCS3 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Power Dynamics

Handleiding Speaker

Nieuwste handleidingen voor Speaker

Braun

Braun LE03 Handleiding

23 November 2024
HK Audio

HK Audio L5-112X Handleiding

23 November 2024
Sony

Sony SS-SPG01 Handleiding

22 November 2024
Sony

Sony SS-MB200H Handleiding

22 November 2024
Sony

Sony SS-MB300H Handleiding

22 November 2024
JBL

JBL Studio 690 Handleiding

22 November 2024
JBL

JBL Studio 680 Handleiding

22 November 2024