Power Dynamics HS30M Handleiding

Power Dynamics Speaker HS30M

Lees hieronder de 📖 handleiding in het Nederlandse voor Power Dynamics HS30M (12 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 48 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/12

HS30M Music Horn Speaker 30W

Ref. nr.: 952.220

INSTRUCTION MANUAL

GEBRUIKSAANWIJZING

BEDIENUNGSANLEITUNG

MANUAL DE INSTRUCCIONES

MANUEL D'INSTRUCTIONS

INSTRUKCJA OBSŁUGI

V1.1

ENGLISH

Congratulations to the purchase of this Power Dynamics product. Please read this manual thoroughly prior to using the unit in

order to benefit fully from all features.

Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to

avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock.

Keep the manual for future reference.

- The unit contains voltage carrying parts. Therefore do NOT open the housing.

- Do not place metal objects or pour liquids into the unit This may cause electrical shock and malfunction.

- Do not place the unit near heat sources such as radiators, etc. Do not place the unit on a vibrating surface. Do not cover the

ventilation holes.

- The unit is not suitable for continuous use.

- If the lead damaged, they need to be replaced by a qualified technician. is

- If the unit is damaged to such an extent that internal parts are visible, do NOT plug the unit into a mains outlet and DO NOT

switch the unit on. Contact your dealer. Do.

- All repairs should be carried out by a qualified technician only.

- To prevent accidents in companies, you must follow the applicable guide lines and follow the instructions.

- Keep the unit out of the reach of children. Do not leave the unit unattended.

- Do not use cleaning sprays to clean switches. The residues of these sprays cause deposits of dust and grease. In case of

malfunction, always seek advice from a specialist.

- Do not force the controls.

- This unit is with speaker inside which can cause magnetic field. Keep this unit at least 60cm away from computer or TV.

- If the unit has fallen, always have it checked by a qualified technician before you switch the unit on again.

- Do not use chemicals to clean the unit. They damage the varnish. Only clean the unit with a dry cloth.

- Keep away from electronic equipment that may cause interference.

- Only use original spares for repairs, otherwise serious damage and/or dangerous radiation may occur.

- Keep the original packing material so that you can transport the unit in safe conditions.

This mark attracts the attention of the user to important instructions that are contained in the manual and that he should

read and adhere to.

The unit has been certified CE. It is prohibited to make any changes to the unit. They would invalidate the CE certificate and

their guarantee!

NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and

35 95°C/ °F .

Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your

dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other.

Specifications can be changed without prior notice.

INSTALLATION

Cabling of a 70/100 Volt system belongs to an electrical installation which may only be carried out by a qualified electricia n!

The total load must not exceed the rated power of the amplifier. Before starting the installation, make clear how many speakers ,

you want to install in the room, and with what wattage(s), as overload will damage the amplifier and speaker.

Procedure:

Step 1: If the 70/100Volt system is turned on, turn it off before connecting.

Step 2: Connect the speaker(s) to the 70/100V amplifier output, using a two-core 100Volt suitable cable. For the

wiring diagram, see later in this manual.

Always insulate the unused connection cables.

Step 3: If you are connecting multiple speakers, make sure that all speakers have the same polarity and that the

amplifier is not overloaded.

Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would also invalid

your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings

contained in this manual. Power Dynamics cannot be held responsible for personal injuries caused by a disrespect of the safety

recommendations and warnings. This is also applicable to all damages in whatever form.

Product specificaties

Merk:	Power Dynamics
Categorie:	Speaker
Model:	HS30M
Kleur van het product:	Wit
Gewicht:	3600 g
Breedte:	355 mm
Diepte:	300 mm
Hoogte:	250 mm
Materiaal behuizing:	Acrylonitrielbutadieenstyreen (ABS)
Connectiviteitstechnologie:	Bedraad
Gemiddeld vermogen:	30 W
Impedantie:	8 Ohm
Audio-uitgangskanalen:	- kanalen
Speaker plaatsing:	Muur-montage
Aantal drivers:	1
Frequentiebereik:	200 - 20000 Hz
Gevoeligheid:	90 dB
Montagebeugels meegeleverd:	Ja
Diameter mid-range driver:	5.25 "