Posiflex SL-105Z Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Posiflex SL-105Z (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 47 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Page 1 2/
SA-104/ /SL-102/104/105 105
USER’S MANUAL
Rev. : B0
I. FEATURES
ISO 7811 Magnetic Stripe Reader 3 tracks in USB full speed
HID interface.
Option ISO ID-Tech encrypted Magnetic Stripe Reader.
Can read AAMVA and CA DMV card.
Total power consumption: 50 mA @ 5V DC.
For integration in XT-3015/4015/3014 series with SA-105/104
on Posiex POS touch terminal systems.
For integration in LM-3014/3015 series with SL-104/105.
For integration in TM-3112HDMI with SL- 102.
Included with Posiex USB MSR manager to t tailored needs.
FCC NOTICE
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions manual,
may cause interference to radio communications. It has been tested and found to comply with limits for a Class A digital device pursuant to subpart J of Part
15 of FCC Rules, which are designed to provide reasonable protection against interference when operated in a commercial environment. Operation of this
equipment in a residential area is likely to cause interference in which case the user at his own expense will be required to take whatever measures to correct
the interference.
WARRANTY LIMITS
Warranty will terminate automatically when the equipment is opened by any person other than the authorized technicians. The user should consult
his/her dealer for the problem happened. Warranty voids if the user does not follow the instructions in application of this merchandise. The manufacturer is by
no means responsible for any damage or hazard caused by improper application.
The hardware utility program, including instructions for its use, is provided “AS IS” without warranty of any kind. Posiflex Technology Inc. further
disclaims all implied warranties including without limitation any implied warranties of merchantability or of tness for a particular purpose. The entire risk
arising out of the use or performance of the software and documentation remains with you.
ABOUT THIS MANUAL
This manual is written in an attempt with full strength to assist the user to utilize the security upgrade kit SA-104/105/SL-102/104/105 for the
Posiex touch terminal systems. This series of products incorporate 2 delicately designed POS peripherals each can be used as an excellent tool to
accommodate the required security specially involved in POS business, kiosk and hospitality operation. This manual covers the conceptual and operational
aspects of these units. For technical aspects involving opening of the unit or option implementation, it is only available to the authorized distributors.
The manufacturer of the -104/105/SL-102/104/105 heartily apologizes to the user for reserving the right to change or to modify this manual SA
without notice due to the rapid and constant progress and improvement on science and technology. The user may always obtain the most up to date
information through any of our web sites: http://www.posiex.com or http://www.posiex.com.tw.
Copyright Posiex Technology Inc. 2013
All rights are strictly reserved. No part of this documentation may be reproduced, stored in a retrieval system, or transmitted in any form or by any
means, electronic, mechanical, photocopying, or otherwise, without the prior written consent of Posiex Technology Inc. the publisher of this documentation
TRADE MARKS AND SERVICE MARKS
POSIFLEX is a registered trademark of Posiex Technology Inc., an ISO-9001 and ISO-14001 certied
manufacturer. Other brand and product names are trademarks and registered trademarks and service marks of their
respective owners.
II. INSTALLATION
1. HARDWARE INSTALLATION
SA- 4/105/SL-104/105 is a USB MSR attachment. SA-104 is for -3114 and SA-105 is for XT-10 XT
3015/4015 terminal series. -104 is for LM-3014/XT-2614 and SL-105 is for LM-3015 monitor. SL
SL-102 is for TM-3112HDMI monitor.
SA-104/105 Installation
Step A: Remove these 2 screws to remove the side mount cover on the back of the right side mount
upgrade kit.
Step B: Take out the cable inside this side mount cover as circled in below picture and connect the
SA-104/105 cable to the indicated one of 2 connectors xed on the main board inside the side mount
cover of XT-3114 and -3015/4015. XT
Step C: Gently arrange the excessive length of this cable back in the hole and use the 2 original
screws to t SA-104/105 back to the position originally occupied by the cover. Please reserve the
cover if there is a chance to have the side mount kit removed in the future.
For SL-1 /105 series ordered with the - host system and for SL-102 ordered with TM-04 LM 14” & 15”
3112HDMI, it is separately delivered from the system at delivery and needs to be xed onto the
system per the following instructions before use.
Step A: Remove the 2 circled screws in the below picture to remove the side mount cover on the
back of the right side mount upgrade kit.
P/N: 18600900030
警告使用者
警告使用者
警告使用者
警告使用者警告使用者
這是甲類的資訊產品,在居住的環
境中使用時,可能會造成射頻
擾,在這種情況下,使用者會被要
求採取某些適當的對
T31454
Page 2 2/
Step B: Take out the cable inside this cover as circled in the below picture and connect the SL-
102/1 /105 cable to the indicated one of the 2 prolonged connectors inside the side mount upgrade 04
kit as indicated.
Step C: Gently arrange the excessive length of this cable back in the hole and screw-t it back to the
position originally occupied by the cover. Please reserve the cover if there is chance to have the side
mount kit removed in the future.
SL-102/104/105 Installation
2. SOFTWARE CONFIGURATION
To customize country specic requirements or meet tailor-made needs, Posiex USB MSR
Manager gives an accessible interface below while factory installed. The SA- /104/SL-105
102/104/105 not required to function synchronously with MSR program to enable card reading. is
User is also required not to modify any settings on this program except that specic or tailor-made
changes are essential for card reading alternatives.
3. DRIVER INSTALLATION
For USB MSR: The magnetic stripe reader in SA-104/105/SL-102/104/105 USBMR: USB 1.1 Full- ,
Speed type, H Keyboard Emulation Class no matter how many tracks are in the reader head, ID ,
connect to the host through USB port. It operates as a USB KB and therefore requires no driver
installation. You only need to set the USB keyboard to be enabled in system CMOS setup if the OS
does not do it automatically. Refer t manipulation over the reader o “Operation Guide” for
conguration.
III. OPERATION GUIDE
1. MAGNETIC STRIPE READER
The MSR in SA- 4/105/SL-102/104/105 reads an ISO magnetic stripe card without driver. Yet, 10
there is a “Posiflex USB MSR Manager” above program provided to control some parameter
conguration for this MSR. In DOS operating system mode, MSR manager works best with USB
keyboard support available in BIOS environment. Similarly, MSR manager works poorly with DOS
mode, if Windows mode is enabled. Except that is defaulted for Sending Leading/Ending Codes
enabling, the features controllable in this program cover each track enable/disable, Alt+Num approach
for ASCII codes. Please nd in the mini CD delivered with SA- 4/105/SL-102/104/105 or Product 10
I nformation CD delivered with Posiflex POS system the folder for “USBMSR” and “Set Up” this
ocial Manager program or download the installation program from our web
http://www.posiex.com http://www.posiex.com.tw or .
I. OPERATION GUIDE
The MSR in SA- 4/105/SL-102/104/105 series reads an ISO magnetic stripe card without additional 10
device driver and its icon can be viewed accordingly in program. For Windows Device Manger
magnetic stripe card reading, be sure to insert the card to the bottom with magnetic stripe facing the
mark aside the slot. The movement of the card can be either inserting the card from the top surface
then sliding the card down out of the slot, or sliding the card upward from the lower side of the slot
till it reaches the top end as long as the card is a standard one. A non-standard card recorded without
complete degaussing prior to recovery may accept only one direction in card reading.


Product specificaties

Merk: Posiflex
Categorie: Niet gecategoriseerd
Model: SL-105Z

Heb je hulp nodig?

Als je hulp nodig hebt met Posiflex SL-105Z stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Posiflex

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd