Posiflex FA-266 Handleiding

Posiflex Niet gecategoriseerd FA-266

Lees hieronder de 📖 handleiding in het Nederlandse voor Posiflex FA-266 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/2
Page 1 / 2
I. FEATURES
ISO 7811 or JIS I/II Magnetic Stripe Reader in USB full speed HID interface
Options for ISO MSR heads covering 1&2 and all 3 tracks
3 tracks type MSR can read also AAMVA and CA DMV card
Optional optical Finger Print Sensor in USB interface
Industry's most accurate ngerprint algorithm
Total power consumption: 300 mA @ 5V DC
Upgrade kit for fan free touch control Desktop POS terminals FT series
FCC NOTICE
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions manual,
may cause interference to radio communications. It has been tested and found to comply with limits for a Class A digital device pursuant to subpart J of Part
15 of FCC Rules, which are designed to provide reasonable protection against interference when operated in a commercial environment. Operation of this
equipment in a residential area is likely to cause interference in which case the user at his own expense will be required to take whatever measures to correct
the interference.
WARRANTY LIMITS
Warranty will terminate automatically when the equipment is opened by any person other than the authorized technicians. The user should consult
his/her dealer for the problem happened. Warranty voids if the user does not follow the instructions in application of this merchandise. The manufacturer is by
no means responsible for any damage or hazard caused by improper application.
The hardware utility program, including instructions for its use, is provided “AS IS” without warranty of any kind. Posiex Technologies, Inc.
further disclaims all implied warranties including without limitation any implied warranties of merchantability or of fitness for a particular purpose. the entire
risk arising out of the use or performance of the software and documentation remains with you.
ABOUT THIS MANUAL
This manual is written in an attempt with full strength to assist the user to utilize the upgrade kit FA-200 for the Posiflex fan free touch control
Desktop POS terminals FT systems. This series of products incorporate 2 delicately designed POS peripherals each can be used as an excellent tool to
accommodate the required security specially involved in POS business, kiosk and hospitality operation. This manual covers the conceptual and operational
aspects of these units. For technical aspects involving opening of the unit or option implementation, it is only available to the authorized distributors.
The manufacturer of the FA-200 series heartily apologizes to the user for reserving the right to change or to modify this manual without notice due
to the rapid and constant progress and improvement on science and technology. The user may always obtain the most up to date information through any of
our web sites: http://www.posiflex.com or http://www.posiflex.com.tw.
Copyright Posiflex Technologies, Inc. 2007
All rights are strictly reserved. No part of this documentation may be reproduced, stored in a retrieval system, or transmitted in any form or by any
means, electronic, mechanical, photocopying, or otherwise, without the prior written consent of Posiflex Technologies, Inc. the publisher of this
documentation
TRADE MARKS AND SERVICE MARKS
POSIFLEX is a registered trademark of Posiflex Technologies, Inc., an ISO-9001 and ISO-14001 certified manufacturer.
Other brand and product names are trademarks and registered trademarks and service marks of their respective owners.
II. INSTALLATION
1. HARDWARE INSTALLATION
For FA-200 series ordered with the host system FT series, it is installed on the system at
delivery. For separately ordered FA-200 series, it is delivered separately from the system and
needs to be fixed onto the system per following instructions before use.
No matter whether the kit itself contains the optional finger print sensor
or not, the connection to the FT system is through an internal cable in right
side cover of the LCD/touch unit. Remove the 2 circled screws in the right
picture to remove the cover for side mount upgrade kit. Take out the cable
inside this cover as circled in the picture here and connect it to connector
inside the side mount upgrade kit as arrowed in the same picture. Gently
arrange the excessive length of this cable back in the hole and screw-fit it
back to the position originally occupied by the cover as in the right picture.
Please reserve the cover if there is chance to have the side mount kit
removed in the future.
2. DRIVER INSTALLATION
1. For MSR: The magnetic stripe reader in FA-200, no matter how many tracks are in the
reader head, connects to the host through USB port working as a USB KB and therefore
requires no driver installation except setting up the USB keyboard to be enabled in system
CMOS setup if the OS does not do it automatically. Refer to “Operation Guide” for
manipulation over the reader configuration.
2. For Finger Print Sensor: To include the drivers for this sensor to perform finger print
registration or verification (authentication) in an AP requires the software programmer to
purchase and utilize its SDK (software developer’s kit). However, Posiflex delivers this
optical finger print sensor with its drivers. Please find in the mini CD delivered with FA-
200 or Product Information CD or DVD delivered with Posiflex POS system the folder for
P/N: 19890900010
警告使用者
警告使用者
警告使用者
警告使用者警告使用者
這是甲類的資訊產品，在居住的環
境中使用時，可能會造成射頻干
擾，在這種情況下，使用者會被要
求採取某些適當的對策。
T
3
14
5
4
FA-200 Series
UPGRADE KIT
USER’S MANUAL
Rev. : Original
Page 2 / 2
“Posiflex Optical Finger Print Sensor” or download the installation program from our web
http://www.posiflex.com or http://www.posiflex.com.tw.
III. OPERATION GUIDE
1. MAGNETIC STRIPE READER
The MSR in FA-200 reads an ISO or JIS magnetic stripe card without driver. Yet, there
is a “Posiflex USB MSR Manager” program provided to control some parameter configuration
for this MSR. The features controllable in this program covers each ISO track enable/disable,
Alt+Num approach for ASCII codes and Leading/Stop code enable/disable. The function for
enabling each track of course comes in effect only when the track is physically available.
Please find in the mini CD delivered with FA-200 or Product Information CD or DVD
delivered with Posiflex POS system the folder for “USBMSR” and “SetUp” this demo program
or download the installation program from our web http://www.posiflex.com or
http://www.posiflex.com.tw.
2. FINGER PRINT SENSOR
a. Cautions
1. Never pour the glass cleaner directly on the sensor window
2. Never use alcohol-based cleaners
3. Never submerge the sensor in liquid
4. Never rub the window with an abrasive material, including paper
5. Do not poke the window coating with your fingernail or any hard item, such as a pen.
b. Principle
The finger print sensor software never stores fingerprint images. The finger print sensor
software creates a fingerprint template, which is a highly compressed and digitally encoded
mathematical representation of fingerprint features. This template is created when a user
registers a finger and is stored in an encrypted file. When the user later touches the fingerprint
reader to authenticate, a new template is created and compared to the “registered” template. If
there is a match, the authentication is successful.
c. Finger Print Recognition
In order for the sensor to acquire a good image of your finger, you must place the pad of
your finger but not the tip in the center of the sensor window, and apply gentle, even pressure.
Do not “roll” your finger as usually practiced in the traditional ink and paper fingerprint taking
technique. Pressing too hard will distort your fingerprint. Pressing too lightly will not expose a
large enough area of your finger. Also, make sure to hold your finger on the sensor until you
see the sensor light blink; this may take longer for dry fingers. Then, lift your finger. Although
you may use any finger with the sensor, your index finger of either hand works best. If the
sensor is capturing your finger image as indicated by the sensor blink and you have tried all the
above suggestions, you may need to reregister your finger.
d. Sensor Activation
There will always be a red light from the sensor to detect the presence of a finger when
the sensor is activated. Failure to connect to a self-powered USB port will cause non-operation
of the sensor. If you activate your terminal’s power saving functionality but your third party
application does not support this, then your fingerprint sensor will enter “sleep mode” even
though your workstation does not. If this occurs, you will need to disconnect and reconnect the
sensor to the USB port. Please check with your application developer for compatibility.
e. Cleaning the Sensor
Depending on the amount of use, the sensor window may need to be cleaned periodically.
To clean it, apply the sticky side of a piece of adhesive cellophane tape on the
window and peel it away as in the drawing at right.
Under heavy usage, the window coating on some sensors may turn cloudy
from the salt in perspiration. In this case, gently wipe the window with a cloth
(not paper) dampened with a mild ammonia-based glass cleaner.

Product specificaties

Merk: Posiflex
Categorie: Niet gecategoriseerd
Model: FA-266

Heb je hulp nodig?

Als je hulp nodig hebt met Posiflex FA-266 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Posiflex

Posiflex

Posiflex PP-8800 Handleiding

9 December 2024
Posiflex

Posiflex PS-3616 Handleiding

9 December 2024
Posiflex

Posiflex TX-2300-G2 Handleiding

6 September 2024
Posiflex

Posiflex TX-1000AE Handleiding

6 September 2024
Posiflex

Posiflex TX-5500 Handleiding

6 September 2024
Posiflex

Posiflex TX-5300 Handleiding

6 September 2024
Posiflex

Posiflex TX-6000 Handleiding

5 September 2024
Posiflex

Posiflex PD-6907U Handleiding

5 September 2024
Posiflex

Posiflex PD-6607U Handleiding

5 September 2024
Posiflex

Posiflex PD-6807U Handleiding

5 September 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Gourmetmaxx

Gourmetmaxx 03863 Handleiding

24 December 2024
Vello

Vello PGS-P Handleiding

24 December 2024
Venom

Venom Quad Charging Station VS4796 Handleiding

24 December 2024
Nec

Nec IPJ2000CM Handleiding

24 December 2024
Monogram

Monogram ZKPN Handleiding

24 December 2024
Philips

Philips Quick Clean Pot QCP10 Handleiding

24 December 2024
Philips

Philips Senseo HD7002 Handleiding

24 December 2024
D-Link

D-Link DUB-C2 Handleiding

24 December 2024
Nec

Nec MultiPresenter Stick DS1-MP10RX1 Handleiding

24 December 2024
Nec

Nec DS1-TM01 Handleiding

24 December 2024