POLARIS P825 Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor POLARIS P825 (60 pagina's) in de categorie Zwembad. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/60
WARNING
FOR YOUR SAFETY - For anything other than the routine cleaning and maintenance described in this manual, this product must be
serviced by a contractor who is licensed and qualified in pool equipment by the jurisdiction in which the product will be installed
where such state or local requirements exist. In the event no such state or local requirement exists, the maintainer must be a
professional with sufficient experience in pool equipment installation and maintenance so that all of the instructions in this manual
can be followed exactly. Improper installation and/or operation will void the warranty.
H0429900 Rev F
OWNER’S MANUAL
P825 Robotic Pool Cleaner
ENGLISH | FRANÇAIS | ESPAÑOL
TYPE EM27--
Page 2
English
THANK YOU FOR PURCHASING THE POLARIS CLEANER.
YOUR POLARIS ROBOTIC CLEANER HAS BEEN DESIGNED AND MANUFACTURED TO BE EASILY INSTALLED
AND TO PROVIDE LOW MAINTENANCE OPERATION. PRIOR TO INSTALLING YOUR NEW POLARIS CLEANER,
PLEASE DO THE FOLLOWING:
1) Complete and return the warranty registration card.
2) Record your purchase information on the spaces provided below.
3) Attach your invoice (or a copy) to this page.
Taking these steps will help ensure prompt warranty service, should it be required. If service is required, please
contact your original dealer. If the original dealer does not perform warranty service, please visit
www.polarispool.com to locate an independent service company near you. If you are unable to locate a service
company, please call our Technical Support department at 1-800-822-7933.
RECORD YOUR POLARIS CLEANER DATA HERE:
Date of Purchase Purchased From Serial Number:
(located on machine head)
City State/Province Zip/Postal Code
Table of Contents
Section 1. Important Safety Instructions 3 ........
Section 2. Cleaner Speciîš¿cations ................... 4
Section 3. Assembly and Setup 4 ......................
3.1 Unpacking .......................................................... 4
3.2 Assembling the Transport Caddy 4 .......................
3.3 Connecting the Control Unit to the Caddy 6 ..........
3.4 Connecting to a Power Source 6 ...........................
Section 4. Operation 7 .........................................
4.1 The Polaris P825 Cleaner Control Unit 8 ..............
4.2 Submerging the Cleaner 8 ....................................
4.3 Starting the Cleaner 9 ...........................................
4.4 Wall Cleaning (Surface Control Systemâ„¢) 9 ..........
4.5 Stopping the Cleaner
and Removing from the Pool 10 ............................
4.6 Rinsing the Cleaner 10 ..........................................
4.7 Cleaning the Filter Canister 10 ..............................
4.8 Storing the Cleaner ..........................................11
Section 5. Maintenance 12 ..................................
5.1 Cord Tangling ................................................... 12
5.2 Replacing the Brushes 13 .....................................
5.3 Replacing the Tracks ........................................ 14
Section 6. Replacement Parts 14 .......................
Section 7. Troubleshooting 15 ...........................
7.1 Using the Cleaner Error Indicator 15 .....................
7.2 General Troubleshooting .................................. 16
Page 3
English
WARNING
Failure to comply with the following warnings can result in permanent injury, electrocution or death.
PREVENT ELECTRICAL SHOCK
To reduce risk of electrical shock:
• Connect unit to receptacle protected by a ground fault circuit interrupter (GFCI). Such a GFCI receptacle should be provided by a qualified
installer and should be tested on a routine basis. To test the GFCI, push the test button. The GFCI should interrupt power. Push the reset
button. Power should be restored. If the GFCI fails to operate in this manner, the GFCI is defective. If the GFCI interrupts power to the pump
without the test button being pushed, a ground current is flowing, indicating the possibility of an electric shock. Do not use this product.
Disconnect the cleaner and have the problem corrected by a qualified service representative before using.
• Per the United States National Electrical Code
® (NEC®), keep the control unit at least five (5) feet from the edge of the (pool/spa) water. In
Canada, the Canadian Electrical Code (CEC) requires a minimum distance of 3m (10 ft.) to be maintained between the pool edge and the
control unit. Never submerge the control unit.
• Do not enter pool while the Polaris cleaner is in water.
• Do not bury cord. Locate cord so as to prevent it from being damaged by lawn mowers, hedge trimmers and other equipment.
• To reduce the risk of electrical shock, do not use the Polaris robotic cleaner or control unit if the cord is worn or damaged. Contact Zodiac Pool
Systems, Inc. Technical Support immediately for proper servicing and replacement of the damaged cord.
• Double insulation—For continued protection against possible electric shock, use only identical replacement parts when servicing. Do not
attempt repair of the Polaris robotic cleaner, control unit, power cord, or floating cable.
• NEVER OPEN CONTROL UNIT.
• DO NOT USE AN EXTENSION CORD TO CONNECT THE UNIT TO ELECTRIC SUPPLY; PROVIDE A PROPERLY LOCATED GFCI
RECEPTACLE. THE CONTROL UNIT SHOULD BE PLACED NEAR THE GFCI RECEPTACLE BOX.
PREVENT CHILD INJURY AND DROWNING
• To reduce the risk of injury, do not permit children to operate this product.
• Do not let anyone, especially small children, sit, step, ean, or climb on any equipment installed as part of our pool’s operational system.l y
Section 1. Important Safety Instructions
Congratulations on purchasing the Polaris Robotic Cleaner. Please read through the entire manual before installing
your new robotic pool cleaner. Your cleaner must be installed and operated as specified.
READ AND FOLLOW ALL INSTRUCTIONS
CAUTION
Failure to comply with the following warnings could cause damage to pool equipment or personal injury.
• The Polaris cleaner must be installed and operated as specified.
• This product is intended for use with permanently-installed pools. Do not use with storable pools. A permanently-installed pool is constructed
in or on the ground or in a building such that it cannot be readily disassembled for storage. A storable pool is constructed so that it is capable
of being readily disassembled for storage and reassembled to its original integrity.
• Clean the filter canister in the Polaris cleaner after each use.
• Do not use the product in your pool if the water temperature is above 95˚ F (35˚ C) or below 55˚ F (13˚ C).
CAUTION
USE OF THE POLARIS ROBOTIC CLEANER IN A VINYL LINER POOL
Certain vinyl liner patterns are particularly susceptible to rapid surface wear of pattern removal caused by objects coming into contact with
the vinyl surface, including pool brushes, pool toys, floats, fountains, chlorine dispensers, and automatic pool cleaners. Some vinyl liner
patterns can be seriously scratched or abraded simply by rubbing the surface with a pool brush. Ink from the pattern can also rub off during
the installation process or when it comes into contact with objects in the pool. Zodiac Pool Systems, Inc., is not responsible for, and the
Limited Warranty does not cover, pattern removal, abrasion or markings on vinyl liners.
SAVE THESE INSTRUCTIONS
Product specificaties
| Merk: | POLARIS |
| Categorie: | Zwembad |
| Model: | P825 |
Heb je hulp nodig?
Als je hulp nodig hebt met POLARIS P825 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Zwembad POLARIS
18 December 2023
18 December 2023
20 Juni 2023
18 Juni 2023
18 Juni 2023
17 Juni 2023
17 Juni 2023
14 Juni 2023
13 Juni 2023
12 Juni 2023
Handleiding Zwembad
- Zwembad Astralpool
- Zwembad Avenli
- Zwembad Bestway
- Zwembad GRE
- Zwembad Hayward
- Zwembad Intex
- Zwembad Jilong
- Zwembad Orilux
- Zwembad Maytronics
- Zwembad Uniprodo
Nieuwste handleidingen voor Zwembad
15 November 2024
15 Oktober 2024
16 Juli 2024
16 Juli 2024
16 Juli 2024
16 Juli 2024
16 Juli 2024
16 Juli 2024
16 Juli 2024