Planar PX2491W Handleiding

Planar Monitor PX2491W

Lees hieronder de 📖 handleiding in het Nederlandse voor Planar PX2491W (36 pagina's) in de categorie Monitor. Deze handleiding was nuttig voor 195 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/36

Make sure to read the before using theImportant Precautions

product. Keep the User's Guide(CD) in an accessible place for future

reference.

See the label attached on the product and give the information to

Planar's customer service representative should you require

assistance.

PX2491W

User's Guide

This unit has been engineered and manufactured to ensure your personal safety,

however improper use may result in potential electrical shock or fire hazards. In

order to allow the proper operation of all safeguards incorporated in this display,

observe the following basic rules for its installation, use, and servicing.

On Safety

Use only the power cord supplied with the unit. If you use another power cord,

make sure that it is certified by the applicable national standards when not

provided by the supplier. If the power cable is faulty in any way, please contact the

manufacturer or the nearest authorized repair service provider for a replacement.

The appliance coupler is used as the disconnect device.

Please make sure the device is installed near the wall outlet to which it is

connected and that the outlet is easily accessible.

Operate the display only from a power source indicated in the specifications of this

manual or listed on the display. If you are not sure what type of power supply you

have in your home, consult with your dealer.

Overloaded AC outlets and extension cords are dangerous. So are frayed power

cords and broken plugs. They may result in a shock or fire hazard. Contact Planar

Customer Service for a replacement cord.

As long as this unit is connected to the AC wall outlet, it is not disconnected from

the AC power source even if the unit is turned off.

Do not Open the Display:

There are no user serviceable components inside.

There are Dangerous High Voltages inside, even when the power is OFF.

Contact Planar if the display is not operating properly.

To Avoid Personal Injury :

Do not place the display on a sloping shelf unless properly secured.

Use only a stand recommended by the manufacturer.

Do not drop an object on or apply impact to the product. Do not throw any toys

or objects on the product screen.

It can cause injury to human, problem to product and damage the display.

To Prevent Fire or Hazards:

Always turn the display OFF if you leave the room for more than a short period

of time. Never leave the display ON when leaving the house.

Keep children from dropping or pushing objects into the display's cabinet

openings. Some internal parts carry hazardous voltages.

Do not add accessories that have not been designed for this display.

When the display is to be left unattended for an extended period of time, unplug

it from the wall outlet.

In the presence of thunder and lightning, never touch the power cord and signal

cable because it can be very dangerous. It can cause electric shock.

Important Precautions

On Installation

Do not allow anything to rest upon or roll over the power cord, and do not place the

display where the power cord is subject to damage.

Do not use this display near water such as near a bathtub, washbowl, kitchen sink,

laundry tub, in a wet basement, or near a swimming pool.

Displays are provided with ventilation openings in the cabinet to allow the release

of heat generated during operation. If these openings are blocked, built-up heat

can cause failures which may result in a fire hazard. Therefore, NEVER:

Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.

Place the display in a built-in enclosure unless proper ventilation is provided.

Cover the openings with cloth or other material.

Place the display near or over a radiator or heat source.

Do not rub or strike the Active Matrix LCD with anything hard as this may scratch,

mar, or damage the Active Matrix LCD permanently.

Do not press the LCD screen with your finger for a long time as this may cause

some afterimages.

Some dot defects may appear as Red, Green or Blue spots on the screen.

However, this will have no impact or effect on the display performance.

If possible, use the recommended resolution to obtain the best image quality for

your LCD display. If used under any mode except the recommended resolution,

some scaled or processed images may appear on the screen. However, this is

characteristic of the fixed-resolution LCD panel.

Leaving a fixed image on the screen for a long time may cause damage to the

screen and cause image burn-in. Make sure to use a screen saver on the product.

Burn-in and related problems are not covered by the warranty on this product.

Do not shock or scratch the front and sides of the screen with metallic objects.

Otherwise, it may cause damage to the screen.

Make sure the panel faces forward and hold it with both hands to move. If you

drop the product, the damaged product can cause electric shock or fire. Contact

Planar for repair.

Avoid high temperatures and humidity.

Product specificaties

Merk:	Planar
Categorie:	Monitor
Model:	PX2491W
Kleur van het product:	Zwart
Beeldscherm:	LCD
Beeldschermdiagonaal:	24 "
Resolutie:	1920 x 1200 Pixels
Touchscreen:	Nee
Oorspronkelijke beeldverhouding:	16:10
Kijkhoek, horizontaal:	178 °
Kijkhoek, verticaal:	178 °
Typische contrastverhouding:	1000:1
Aantal HDMI-poorten:	1
Bevestigingsmogelijkheid voor kabelslot:	Nee
Ingebouwde luidsprekers:	Nee
Certificering:	UL, cUL, CE
HD type:	Niet ondersteund
3D:	Nee
Responstijd:	8 ms
VESA-montage:	Ja
Paneelmontage-interface:	100 x 100 mm
DVI-D poorten:	1
Helderheid (typisch):	250 cd/m²
Beeldverhouding:	16:10
Geïntegreerde TV Tuner:	Nee
Ingebouwde camera:	Nee
Diepte ( zonder voet ):	457 mm
Hoogte (zonder voet ):	279 mm
Breedte ( zonder voet ):	558 mm
Gewicht (zonder voet):	10500 g
Aantal USB Type-A downstream-poorten:	5
Versie USB-hub:	2.0
Thin client geïnstalleerd:	Nee
DVI-I poorten:	1
AC-ingangsspanning:	100 - 240 V
AC-ingangsfrequentie:	50 - 60 Hz
Stroomverbruik (typisch):	65 W
Bereik kantelhoek:	-5 - 22 °