Pioneer S-CN301-LR Handleiding

Pioneer Speaker S-CN301-LR

Lees hieronder de 📖 handleiding in het Nederlandse voor Pioneer S-CN301-LR (56 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/56

ඵᖑᏣقಜ

ᐈձКь

S-CN301-LR

(États-Unis)

Thank you for buying this Pioneer product.

Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the

instructions, put them away in a safe place for future reference.

Before you start

• The nominal impedance of this speaker system is 6 Ω.

Connect the speaker system to an amplifier with a load

impedance ranging 6 Ω (a model with “6 Ω” displayed on the

speaker output terminals).

In order to prevent damage to the speaker system resulting from

input overload, please observe the following precautions:

• Do not supply power to the speaker system in excess of the

maximum permissible input.

• When using a graphic equalizer to emphasize loud sounds in

the high-frequency range, do not use excessive amplifier

volume.

• Do not try to force a low-powered amplifier to produce loud

volumes of sound (the amplifier’s harmonic distortion will be

increased, and you may damage the speaker).

Caution: installation

• Switch off and unplug your AV equipment and consult the

instructions when connecting up components. Make sure you

use the correct connecting cables.

• Do not install the speaker system in areas exposed to direct

sunlight nor near heating appliances. Such conditions may

result in shrinkage of the wood materials and finish, leading to

deformation of the enclosure, discoloration, or damage to the

speakers.

Conditions considered unpleasant by humans are

detrimental to speakers as well. Providing a comfortable

environment for the speakers will assist them in

demonstrating their best performance. Please maintain the

usage environment as follows:

Temperature: 15 º º º ºC to 25 C (59 F to 77 F)

Relative Humidity: 35 % to 65 % (winter)

40 % to 70 % (summer)

•

When using room air-conditioners or stoves to rapidly cool

or heat room spaces, take precautions to avoid excessive

dehumidification.

•

Avoid placing the speaker near areas such as windows, as

outside air can cause condensation to occur within the

speaker.

Caution: in use

• Do not use the speaker to output distorted sound for long

periods of times. This can result in a fire hazard.

• Do not sit or stand on the speaker, or let children play on the

speaker.

• Do not put large or heavy objects on top of the speaker.

• The speaker has a built-in auto recovery circuit breaker that

protects it from signal overloads. If the speaker is muted due

to an excessive signal input, turn down amplifier volume and

wait a few seconds. The circuit breaker will automatically

switch off and turn the speakers back on.

Cleaning the speaker cabinet

With normal use, wiping with a dry cloth should be sufficient to

keep the cabinet clean. If necessary, clean with a cloth dipped in

a neutral cleanser diluted five or six times with water, and wrung

out well. Do not use furniture wax or cleansers.

Never use thinners, benzine, insecticide sprays or other chemicals

on or near this unit since these will corrode the surfaces.

For U.S. model

For European model

WARNING: Handling the cord on this product or

cords associated with accessories sold with the

product may expose you to chemicals listed on

proposition 65 known to the State of California and

other governmental entities to cause cancer and

birth defect or other reproductive harm.

D36-P5_B1_En

If you want to dispose this product, do not mix it with general household waste. There is a separate collection system for used

electronic products in accordance with legislation that requires proper treatment, recovery and recycling.

Private households in the member states of the EU, in Switzerland and Norway may return their used electronic products free of charge to

designated collection facilities or to a retailer (if you purchase a similar new one).

For countries not mentioned above, please contact your local authorities for the correct method of disposal.

By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus prevent potential

negative effects on the environment and human health.

K058b_A1_En

English

How to install

Choosing where to place the speaker systems

• Sounds played through speaker systems are easily affected in

subtle ways by the conditions in the listening space.

• For best sound, choose a solid floor upon which to place the

speakers, and position the speakers as illustrated above. The

level of low sounds can be adjusted by moving the speakers

closer to or further from the back wall. Adjust the speakers so

that they are equidistant from their respective side walls to

assure balanced sound.

• Place the left and right speakers equal distances from your

listening position for good stereo sound. Use speaker cords of

the same length for each speaker.

• If the room has a lot of reverberation, we recommend hanging

heavy fabric on the walls, and/or putting a carpet on the floor

to damp the sound. For best results, cover walls completely.

• Do not place the speaker on an unstable surface. It could

present a hazard if it falls, as well as damaging the equipment.

• These speakers are bookshelf-type speakers which will give

their best performance when placed on a solid, level surface

off the floor. Placing the speakers directly on the floor will

result in boomy, undefined sound. Ideally, the tweeters should

be at about ear level when seated in your listening position.

• This unit has two screw holes on the

bottom panel. These holes are

meant for joint use with speaker

brackets and speaker stands;

speaker brackets are commercially

available and can be used to mount

the speakers on a wall or ceiling. The

diagram on the right shows the

spacing and size of the holes. When

choosing a speaker bracket, make

sure that it can hold at least 2.9 kg (6

lbs 6 oz.). Please read through the

safety cautions on this operating

instruction, also the instructions

that come with the bracket. Speakers that are not mounted

properly are a hazard.

Mounting the Safety support fixture

• Make sure that the wall you intend to mount the speakers on

is strong enough to support them.

• Pass a commercially-available strong cord through the safety

support fixture to securely support the speaker to the wall. Be

sure that the wall to which you fasten the speaker is strong

enough to support the weight of the speaker. After fastening

the speaker, make sure that it does not fall over.

• Do not attach the safety support fixture directly to the wall. It

should only be used in conjunction with strong cord to prevent

the speaker from falling.

• Do not install your speakers overhead on the ceiling or wall.

The grill is designed to be detachable, and as such it may fall

and cause damage or personal injury if installed overhead.

• Using the accessory screws, fasten the safety support fixtures

to the holes in the bottom of the speakers.

Examples of mounting the speaker system using the

safety support fixture

Mounting on the wall

Mounting on the ceiling

• Loosen the screw on the grille’s back once, then bind the

strong cord around the screw several times and tighten the

screw.

• Pass two strong cords through the safety support fixture, and

fasten the speaker to the wall or ceiling as shown above.

• If you mount the speakers on the wall or ceiling, first make

sure that the mounting surface can bear at least 2.9 kg (6 lbs

6 oz.). If you’re unsure of the load capability, please seek

professional advice.

• When installing the speaker on the ceiling, the speaker will be

upside down. Even so, putting the grille in the proper way (the

way you can read Pioneer logo in the right way) is

recommended.

• After installing, make sure the speakers are securely fixed.

50 cm

(19 11/16 in.)

from the side

wall

20 cm

(7 7/8 in.)

from the

back wall 50º to 60º

Use M5 screws.

The screw hole depth:

9 mm (3/8 in.)

60 mm (2 3/8 in.)

Grille

Speaker’s rear view

Safety support fixture

Screw Strong cords

Speaker’s rear view

Safety support fixture

Grille

Screw

Strong cords

Product specificaties

Merk:	Pioneer
Categorie:	Speaker
Model:	S-CN301-LR
Breedte:	135 mm
Diepte:	220 mm
Hoogte:	230 mm
Connectiviteitstechnologie:	Bedraad
Gemiddeld vermogen:	100 W
Equalizer-instellingen:	Nee
Aanbevolen gebruik:	Universeel
Impedantie:	6 Ohm
Audio-uitgangskanalen:	2.0 kanalen
Speaker plaatsing:	Tafelblad/Boekenplank
Woofer:	Ja
Frequentiebereik:	45 - 40000 Hz
Luidspreker soort:	2-weg
Diameter woofer:	3.9 "
Diameter hogetonenluidspreker:	0.8 "
Tweeter:	Ja
Driver cone material:	Glasvezel