Pioneer S-31C-K Handleiding

Pioneer Speaker S-31C-K

Lees hieronder de 📖 handleiding in het Nederlandse voor Pioneer S-31C-K (59 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 45 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/59

ඵᖑᏣقಜ / ᆲ໌ධ

ᐈձКь / ໪ቂངಖ༚

S-31C-K

S-31C-QL

Thank you for buying this Pioneer product.

Please read through these operating instructions so you will know how to operate your

model properly. After you have finished r

eading the

instructions, put them away in a safe place for future reference.

Before you start

• The nominal impedance of this speaker system is 6 Ω.

Connect the speaker system to an amplifier with a load

impedance ranging from 4 Ω to 16 Ω (a model with “4 Ω to

16 Ω” displayed on the speaker output terminals).

In order to prevent damage to the speaker system resulting

from input overload, please observe the following precautions:

• Do not supply power to the speaker system in excess of the

maximum permissible input.

• When using a graphic equalizer to emphasize loud sounds

in the high-frequency range, do not use excessive amplifier

volume.

• Do not try to force a low-powered amplifier to produce loud

volumes of sound (the amplifier’s harmonic distortion will

be increased, and you may damage the speaker).

Caution: installation

• Do not attach these speakers to the wall or ceiling. They may

fall off and cause injury.

• Do not install your speakers overhead on the ceiling or wall. If

improperly attached, the speaker grille can fall and cause

damage or personal injury.

• Switch off and unplug your AV equipment and consult the

instructions when connecting up components. Make sure you

use the correct connecting cables.

Caution: in use

• Do not place the speaker on an unstable surface. It could

present a hazard if it falls, as well as damaging the equipment.

• Do not use the speaker to output distorted sound for long

periods of times. This can result in a fire hazard.

• Do not sit or stand on the speaker, or let children play on the

speaker.

• Do not put large or heavy objects on top of the speaker.

Cleaning the speaker cabinet

With normal use, wiping with a dry cloth should be sufficient to

keep the cabinet clean. If necessary, clean with a cloth dipped in

a neutral cleanser diluted five or six times with water, and wrung

out well. Do not use furniture wax or cleansers.

Never use thinners, benzine, insecticide sprays or other chemicals

on or near this unit since these will corrode the surfaces.

What’s in the box

Speaker cable (3 m) x 1

Silicon rubber foot x 4

Warranty card

Operating instructions (this document)

For U.S. model

For European model

WARNING:

Handling the cord on this product or

cords associated with accessories sold with the

product will expose you to chemicals listed on

proposition 65 known to the State of California and

other governmental entities to cause cancer and

birth defect or other reproductive harm.

D36-P4_A_En

Wash hands after handling

If you want to dispose this product, do not mix it with general household waste. There is a separate collection system for used

electronic products in accordance with legislation that requires proper treatment, recovery and recycling.

Private households in the member states of the EU, in Switzerland and Norway may return their used electronic products free of charge to

designated collection facilities or to a retailer (if you purchase a similar new one).

For countries not mentioned above, please contact your local authorities for the correct method of disposal.

By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus prevent potential

negative effects on the environment and human health.

K058_A_En

English

How to install

Choosing where to place the speaker systems

• Sounds played through speaker systems are easily affected in

subtle ways by the conditions in the listening space.

• For best sound, choose a solid floor upon which to place the

speakers, and position the speakers as shown below. The level

of low sounds can be adjusted by moving the speakers closer

to or further from the wall. Adjust the speakers so that they are

equidistant from their respective side walls to assure balanced

sound.

• If the room has a lot of reverberation, we recommend hanging

heavy fabric on the walls, and/or putting a carpet on the floor

to damp the sound. For best results, cover walls completely.

• This speaker is a bookshelf-type speaker which will give best

performance when placed on a solid, level surface off the floor.

Placing the speaker directly on the floor will result in boomy,

undefined sound.

• Pioneer assumes no liability whatsoever for damages

resulting from assembly, improper mounting, insufficient

reinforcement, misuse of the product, acts of nature, etc.

Using the Foam Plug

On the rear side of the unit, a foam plug is provided to allow

adjustment of the bass sound. The foam plug can be removed if

desired to produce a different bass emphasis.

The following can be taken as general guidelines for use of the

foam plug:

• Mounted in the middle of a rack: Leave the foam plug in place

• Mounted on the top of a rack or on the floor: Remove the foam

plug

When using the silicon rubber feet

These speaker systems have been provided with silicon rubber

feet. Use them to adjust the four corners to produce optimum

stability.

Using the template (see end page) will allow easiest adjustment of

the setting angle.

Using the template

1 Open the hole in the template along the line indicating

your desired setting angle.

2 Align the line with the front of the unit, and then align

the template with the cabinet.

3 Affix the four silicon rubber feet in alignment with the

four cut-out holes.

Attaching and Removing the Grille

It is recommended that this speaker system be used with the grille

net attached, but it can be removed if desired. To remove, follow

these instructions:

1 To remove the grille, place your fingers at the outside of

the grille toward the bottom and pull gently outward. Then

do the same at the top to detach.

2 To reattach the grille, hold the speaker grille with the

triangular symbol pointing upward, then align the four pins

on the back side of the grille with the holes in the speaker

and press in firmly.

Do not force the foam plug into the hole excessively,

since it might be pressed inside the speaker and be

impossible to remove.

50 cm

(19 11/16 in.) 20 cm

(7 7/8 in.)

foam plug

0 5 101520

Product specificaties

Merk:	Pioneer
Categorie:	Speaker
Model:	S-31C-K
Kleur van het product:	Zwart
Gewicht:	3600 g
Gemiddeld vermogen:	120 W
Uitgangsvermogen:	120 W
Impedantie:	6 Ohm
Audio-uitgangskanalen:	2.0 kanalen
Frequentiebereik:	50 - 40000 Hz
Gevoeligheid:	84 dB
Afmetingen (B x D x H):	364 x 176 x 144 mm
Diameter woofer:	100 mm
Diameter hogetonenluidspreker:	25 mm
Tweeter:	Ja