Pioneer PRS-D3000SPL Handleiding
Pioneer
Auto versterker
PRS-D3000SPL
Lees hieronder de 📖 handleiding in het Nederlandse voor Pioneer PRS-D3000SPL (86 pagina's) in de categorie Auto versterker. Deze handleiding was nuttig voor 43 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/86
ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS
CLASS D MONO AMPLIFIER
AMPLIFICATEUR MONO DE CLASSE D
Owner’s Manual
PRS-D3000SPL
Mode d’emploi
1
Contents
Before Using This Product ...................... 2
In case of trouble .............................................. 2
About This Product .......................................... 2
CAUTION ........................................................ 2
WARNING ........................................................ 2
Setting the Unit .......................................... 3
Bass Boost Frequency Control .......................... 3
Gain Control ...................................................... 3
MODE SELECT Switch .................................. 3
Bass Boost Level Control .................................. 3
Cut Off Frequency Control for LPF .................. 4
Subsonic Select Switch .................................... 4
BFC (Beat Frequency Control) Switch ............ 4
Power Indicator ................................................ 4
Connecting the Unit .................................. 5
Connection Diagram ........................................ 6
Connecting the Power Terminal ........................ 7
Connecting the Speaker Terminals .................. 8
Setting the Gain for Synced Amplifier .............. 9
Quick Setup of the Gain .................................... 9
Advanced Setup of the Gain .............................. 9
Connecting the Speaker Wires .......................... 9
Installation ................................................ 13
Example of installation on the floor mat
or on the chassis ...................................... 13
Specifications .......................................... 14
Before Using This Product
2
ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS
Thank you for purchasing this PIONEER
product. Before attempting operation, be
sure to read this manual.
In case of trouble
When the unit does not operate properly,
contact your dealer or the nearest autho-
rized PIONEER Service Station.
About This Product
This product is a class D amplifier for the
subwoofer. If both L (left) and R (right)
channels are connected to the RCA input
of this product, output is mixed because
this product is a mono amplifier.
CAUTION
Never replace the fuse with one of greater
value or rating than the original fuse. Use
of an improper fuse could result in over-
heating and smoke and could cause dam-
age to the product and injury including
burns.
WARNING
• Always use the recommended battery wire and
ground wire, which is sold separately. Connect
the battery wire directly to the car battery positive
terminal (+) and the ground wire to the car body.
• Do not touch the amplifier with wet hands.
Otherwise you may get an electric shock. Also,
do not touch the amplifier when it is wet.
• For traffic safety and to maintain safe driving
conditions, keep the volume low enough so that
you can still hear normal traffic sound.
• Check the connections of the power supply and
subwoofer if a fuse for the separately sold battery
wire blows. Detect the cause and solve the prob-
lem, then replace the fuse with another one of the
same size and rating.
• To prevent malfunction of the amplifier and sub-
woofer, the protective circuit will cut the power
supply to the amplifier (sound will stop) when an
abnormal condition occurs. In such a case, switch
the power to the system OFF and check the
connection of the power supply and subwoofer.
Detect the cause and solve the problem.
• Contact the dealer if you cannot detect the cause.
• To prevent an electric shock or short-circuit
during connection and installation, be sure to
disconnect the negative (–) terminal of the battery
beforehand.
• Confirm that no parts are behind the panel when
drilling a hole for installation of the amplifier. Be
sure to protect all cables and important equipment
such as fuel lines, brake lines and the electrical
wiring from damage.
• DO NOT allow amplifier to come into contact
with liquids due to, for example, the location
where the amplifier is installed. Electrical shock
could result. Also, amplifier and speaker damage,
smoke, and overheating could result from contact
with liquids. In addition, the amplifier surface
and the surface of any attached speakers could
become hot to the touch and minor burns could
result.
Product specificaties
| Merk: | Pioneer |
| Categorie: | Auto versterker |
| Model: | PRS-D3000SPL |
Heb je hulp nodig?
Als je hulp nodig hebt met Pioneer PRS-D3000SPL stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Auto versterker Pioneer
22 Maart 2022
22 Maart 2022
23 Maart 2022
25 Februari 2022
24 Februari 2022
24 Februari 2022
24 Maart 2022
24 Februari 2022
24 Februari 2022
24 Februari 2022
Handleiding Auto versterker
- Auto versterker JVC
- Auto versterker Kenwood
- Auto versterker Auna
- Auto versterker Autotek
- Auto versterker Hifonics
- Auto versterker Macrom
- Auto versterker Marquant
- Auto versterker Phoenix Gold
- Auto versterker JL Audio
Nieuwste handleidingen voor Auto versterker
19 Oktober 2023
19 Oktober 2023
19 Oktober 2023
19 Oktober 2023
19 Oktober 2023
19 Oktober 2023
19 Oktober 2023
19 Oktober 2023
19 Oktober 2023
19 Oktober 2023