Pioneer PDP-S41 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Pioneer PDP-S41 (39 pagina's) in de categorie Luidspreker. Deze handleiding was nuttig voor 8 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/39
PDP-S41
Operating Instructions
Mode d’emploi
Bedienungsanleitung
Istruzioni per l’uso
Gebruiksaanwijzing
Manual de instrucciones
Speaker System
Enceinte acoustique
Lautsprechersystem
Sistema di diffusori
Luidsprekersysteem
Sistema de altavoces
English
2
Thank you for buying this Pioneer product.
Please read through these operating instructions before using
your speaker system so you will know how to make the
most of its performance. After you have finished reading the
instructions, put them away in a safe place for future
reference.
WARNING: Handling the cords associated with
accessories sold with the product will expose you to
chemicals listed on proposition 65 known to the
State of California and other governmental entities
to cause cancer and birth defect or other
reproductive harm.
Wash hands after handling
CAUTION
About compatibility
This product is designed exclusively for use with the Pioneer
Plasma Display. For more information on compatibility, please
consult with your nearest Pioneer authorized dealer or service
center.
About installation and setting
If you want to move the Plasma Display unit, make sure
that you remove the speaker first. In addition, do not move
the display holding on to the mounting fittings. This can
result in injury or damage to the unit.
This speaker is wide, and may become unstable when
installed by a one person alone. This may result in injury
or product damage. Therefore, at least two people must
assemble and install them.
When installing the speaker, do not use any screws other
than those supplied, otherwise the speaker may come
off from the main unit and fall over.
When installing the speaker, tighten the screws firmly.
Please handle the speaker with sufficient care, as the
grille net and the cabinet can become damaged or broken
when they are subjected to strong external impacts.
Placing a CRT computer screen or CRT monitor near to
the speaker may result in interference or color distortion.
If this happens, distance the monitor from the speaker.
About the input
In order to prevent damage to the speaker system
resulting from input overload, please observe the
following precautions:
Do not use the speaker with anything other than the
specified Pioneer Plasma Display. Doing so may result in
damage or fire.
Be sure to turn the connected devices off and remove
the power cord from the wall outlet beforehand when
changing the connection or installation method.
When using a tone control function to greatly emphasize
treble sounds, do not use excessive amplifier volume.
CHECKING THE ACCESSORIES
Speaker Cable × 2
Speaker Mounting Fittings
Bracket, for Right and Left Sides
Bracket for Center
Speaker Mounting Screw
(M5 × 10 mm : Black) × 12
Hexagonal wrench
(Opposite side 4 mm for M5 use) x 1
Operating Instructions
Installation
Consult your dealer if you encounter any difficulties
with this installation.
Pioneer is not liable for any damage resulting from
improper installation, improper use, modification, or
natural disasters.
3
English
English
INSTALLATION ON THE PLASMA
DISPLAY
Perform installation according to the following steps 1 to 4.
NOTE:
Before attaching the speaker, please attach the table top
stand to the Plasma Display unit.
1. Attach the speaker mounting fittings to the
rear of the Plasma Display.
Attach the fittings for right and left sides to the bottom
right and left on the rear panel of the Plasma Display using
the supplied screws.
Tighten the two screws in the order 1 followed by 2.
Plasma Display with the speaker installed
Speaker
mounting
screw
(M5 x 10 mm)
Speaker mounting fitting
(right side)
Speaker cable
Speaker mounting
fitting (center)
Speaker
Speaker mounting
fitting (left side)
Speaker
mounting screw
(M5 x 10 mm)
2. Attach the center fitting to the lower center
on the rear panel of the Plasma Display.
Attach the center fitting to the lower center on the rear
panel of the Plasma Display using the four supplied
screws.
Tighten the four screws in the order 1, 2, 3, 4 as shown
in the drawing.
When fitting the screws, place screws 1 and 2 through
the holes in the center fitting, and align screws 3 and 4
with the cutaway slots in the center fitting.
NOTE:
See page 6 for speaker mounting procedures when using
the hung on wall unit.
Speaker mounting
screw (M5 x 10 mm)
Bead Band
(Accessories of the Plasma Display)
1
2
Speaker mounting
screw (M5 x 10 mm)
Label L is
affixed to the left
side fitting.
(Similarly, label
R is
affixed to the
right side fitting.)
Speaker mounting fitting for the
left side
(the fitting method is the same
as the fitting for the right side)
1
2
3
4
Speaker mounting
screw (M5 x 10 mm) Speaker mounting fitting for
center


Product specificaties

Merk: Pioneer
Categorie: Luidspreker
Model: PDP-S41

Heb je hulp nodig?

Als je hulp nodig hebt met Pioneer PDP-S41 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Luidspreker Pioneer

Handleiding Luidspreker

Nieuwste handleidingen voor Luidspreker

Nikkei

Nikkei NWS04 Handleiding

26 Oktober 2024
JBL

JBL AS5 Handleiding

2 November 2024
Envivo

Envivo ENV-1690 Handleiding

21 December 2023
JBL

JBL 4367 Handleiding

25 Oktober 2023
JBL

JBL 4349 Handleiding

25 Oktober 2023
JBL

JBL B-8IC Handleiding

25 Oktober 2023
JBL

JBL B-6ICDT Handleiding

25 Oktober 2023
KEF

KEF c5 Handleiding

8 Oktober 2023