Pioneer HTZ-55DV Handleiding
Pioneer
Home system
HTZ-55DV
Lees hieronder de 📖 handleiding in het Nederlandse voor Pioneer HTZ-55DV (68 pagina's) in de categorie Home system. Deze handleiding was nuttig voor 27 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/68
HTZ-55DV
DVD SURROUND SYSTEM
Operating Instructions
2
En
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Information to User
Alteration or modifications carried out without appropriate authorization
may invalidate the user’s right to operate the equipment.
CAUTION
This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic
interference with electric appliances such as radios and televisions, use shielded cables and connectors for connections.
CAUTION
• Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
• The use of optical instruments with this product will increase eye hazard.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
THE STANDBY/ON BUTTON IS SECONDARY CONNECTED AND
THEREFORE DOES NOT SEPARATE THE UNIT FROM MAINS POWER
IN STANDBY POSITION.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
IMPORTANT
CAUTION:
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK). NO USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated "dangerous voltage" within the
product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
POWER-CORD CAUTION
Handle the power cord by the plug. Do not pull out the plug by tugging the
cord and never touch the power cord when your hands are wet as this could
cause a short circuit or electric shock. Do not place the unit, a piece of
furniture, etc., on the power cord, or pinch the cord. Never make a knot in
the cord or tie it with other cords. The power cords should be routed such
that they are not likely to be stepped on. A damaged power cord can cause a
fire or give you an electrical shock. Check the power cord once in a while.
When you find it damaged, ask your nearest PIONEER authorized service
center or your dealer for a replacement.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
These labels can be found on the unit’s bottom panel. Ces étiquettes se trouvent sur le fond de l’appareil.
ATTENTION
DANGER D'ELECTROCUTION
NE PAS OUVRIR
The following caution appears on your unit.
Location: bottom of the unit
CAUTION
This product contains a laser diode of higher class than 1. To
ensure continued safety, do not remove any covers or attempt
to gain access to the inside of the product.
Refer all servicing to qualified personnel.
CAUTION :
VORSICHT :
ADVARSEL :
VARNING :
VARO! :
LASER RADIATION WHEN OPEN.
AVOID EXPOSURE TO BEAM.
LASERSTRAHLUNG, WENN ABDECKUNG GEÖFFNET
NICHT DEM STRAHL AUSSETZEN!
LASERSTRÃ…LING VED Ã…BNING UNDGÃ…
UDSÆTTELSE FOR STRÅLING.
LASERSTRÅLNING NÄR DENNA DEL ÄR
ÖPPNAD BETRAKTA EJ STRÅLEN.
AVATTAESSA ALTISTUT LASERSÄTEIL YLLE.
ÄLÄ KATSO SÄTEESEN.
VRW1697
CLASS 1
LASER PRODUCT
3
En
Installation Precautions
• Install components so that there are no obstructions above
or either side of them, or by ventilation holes. Also install
10cm away from the wall as shown in the figures.
Components feature ventilation holes on the bottom so do
not install on thick pile carpets or other surfaces that may
block them.
• Use a vacuum cleaner periodically to clean the port of the
subwoofer to keep it free of dust.
Powered subwoofer unit (S-DV55SW)
DVD Tuner system (XV-DV55)
Rear: 10 cm (4 in.) or more
10 cm (4 in.)
or more
10 cm (4 in.) or more
25 cm (10 in.) or more
10 cm
(4 in.)
or more
25 cm (10 in.) or more
Rear: 10 cm (4 in.) or more
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know
how to operate your model properly. After you have finished
reading the instructions, put them away in a safe place for future
reference.
In some countries or regions, the shape of the power plug and
power outlet may sometimes differ from that shown in the
explanatory drawings. However, the method of connecting and
operating the unit is the same.
Line Voltage Selector Switch
Only multi-voltage models are provided with this switch.
There is a Voltage Selector. Australian model is not provided
with this switch. Be sure this is set correctly.
Mains voltages in Saudi Arabia are 127 V and 220 V only.
Always check that this selector is set properly before
plugging the power cord into the wall outlet.
1. Disconnect the power cord.
2. Use a small-sized screwdriver (flat blade).
3. Insert the screwdriver into the groove on the
voltage selector, and adjust the voltage
selector.
110V
-127V
220V
-230V
240V
VOLTAGE SELECTOR
CAUTION
DISCONNECT POWER
SUPPLY CORD,
BEFORE CHANGING
THE VOLTAGE
CAUTION 240V
Power source voltage is factory adjusted
240 volts. If your area is different, change
voltage selector setting.
Product specificaties
| Merk: | Pioneer |
| Categorie: | Home system |
| Model: | HTZ-55DV |
Heb je hulp nodig?
Als je hulp nodig hebt met Pioneer HTZ-55DV stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Home system Pioneer
23 December 2022
16 Augustus 2022
16 Augustus 2022
16 Augustus 2022
16 Augustus 2022
16 Augustus 2022
16 Augustus 2022
17 Augustus 2022
17 Augustus 2022
17 Augustus 2022
Handleiding Home system
Nieuwste handleidingen voor Home system
12 Juni 2023
12 Juni 2023
23 December 2022
18 April 2022
20 April 2022
19 April 2022
9 April 2022
19 April 2022
16 Augustus 2022
1 April 2022