Pioneer DM-50D-BT Handleiding

Pioneer Speaker DM-50D-BT

Lees hieronder de πŸ“– handleiding in het Nederlandse voor Pioneer DM-50D-BT (9 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 69 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/9
DM-50D-BT / D M-50D-BT-W
Active Monitor Speaker
Instruction Manual
pioneerdj.com/support/
For FAQs and other support information for this product, visit the above site.
Before you start
How to read this manual
Thank you for choosing this Pioneer DJ product.
Be sure to read this manual, the β€œQuick Start Guide” and the β€œPrecautions for Use” which are also included with this product. These
documents include important information that you should understand before using the speakers.
What's in the box
β€’ξ˜ƒ Power cord Γ— 1
β€’ξ˜ƒ Audio converter cable (3.5 mm stereo mini plug to RCA) Γ— 1
β€’ξ˜ƒ Speaker cord Γ— 1
β€’ξ˜ƒ Bottom cushion Γ— 2 (4pcs / 1 sheet)
β€’ξ˜ƒ Quick Start Guide Γ— 1
β€’ξ˜ƒ Precautions for Use
β€’ξ˜ƒ Warranty (for some regions) *
* Only products in Europe.
Products in North America and Japan include warranty information in the β€œPrecautions for Use”.
Part names
Front panel
1
7
8
9
2
4
5
6
a
3
1 3/4 inch soft dome tweeters
2 POWER indicator
Lights up when the power is turned on. The indicator is off in
Standby mode.
3 Diffusers
Improve the sound directivity of high frequencies and provide
spacious sound.
4 LEVEL knob
Adjusts the volume.
5 Pairing button
Pairs the speakers with a device.Bluetooth
Plays/pauses a track played on a device. Bluetooth
For details, refer to β€œListening to the music of a Bluetooth
device” (Page 5).
Rear panel
2
4
5
6
3
1
7
1 RCA INPUT terminals
These are RCA pin type unbalanced input terminals.
2 STEREO MINI INPUT terminal
This is a 3.5 mm stereo mini jack type unbalanced input
terminal.
3 TRS INPUT terminals
These are 1/4-inch phone type balanced input terminals.
4 Speaker connection connectors
Connect the left and right speakers using the supplied cord.
Do not connect these speakers to an amplifier other than that
of this system. Doing so may cause a damage or fire.
5 POWER switch
Turns the power for the speakers on and off.
6 AC IN
Connect to a power outlet with the supplied power cord.
Connect the power cord after all the connections are
complete.
Use the supplied power cord.
7 SOUND MODE switch
Switches between the DJ mode and PRODUCTION mode.
DJ mode: For a punchy sound suited for DJ applications.
PRODUCTION mode: For flat frequency response that
accurately reproduces the input sound.
CAUTION
The switch on this unit will not completely shut off all POWER
power from the AC outlet. Since the power cord serves as the main
disconnect device for the unit, you will need to unplug it from the
AC outlet to shut down all power. Therefore, make sure the unit has
been installed so that the power cord can be easily unplugged from
the AC outlet in case of an accident. To avoid fire hazard, the power
cord should also be unplugged from the AC outlet when left unused
for a long period of time (for example, when on vacation).
D3-4-2-2-2a*_A1_En
CAUTION
β€’ξ˜ƒ This product is provided with an auto standby function. If a state
of no sound continues for a set time (approximately 30 minutes)
during use, the product automatically turns off the POWER
indicator and enters Standby mode with low power consumption
regardless of whether there is a
Bluetooth
connection.
β€’ξ˜ƒ If the product enters Standby mode when there is a
Bluetooth
connection, the
Bluetooth
connection is disconnected and the
Pairing indicator also turns off.
β€’ξ˜ƒ When an audio signal is input from the input terminals in
Standby mode, the product automatically enters Power-on
mode. Furthermore, the product also enters the Power-on mode
if the
Bluetooth
pairing button is pressed while in Standby mode.
β€’ξ˜ƒ This auto standby function cannot be disabled.
6
Pairing indicator (Page 5)
When flashing: Pairing operation is performed or waiting to
connect
When lit: Connected with a deviceBluetooth
7 5 inch glass fiber woofers
8 Bass reflex ducts
9 Grooves
Adjust the airflow of the bass reflex ducts to radiate low
frequencies smoothly.
a
Headphone terminal
This is a 3.5 mm stereo mini jack type output terminal.
Connecting headphones mutes the sound output from the
speakers and outputs the sound only from the headphones.


Product specificaties

Merk: Pioneer
Categorie: Speaker
Model: DM-50D-BT

Heb je hulp nodig?

Als je hulp nodig hebt met Pioneer DM-50D-BT stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Pioneer

Handleiding Speaker

Nieuwste handleidingen voor Speaker